===================== Product Identification =====================
MSDS NAME:AWESOME
NIIN:00N014909
MSDS Number: BKMNN
=== Responsible Party ===
Company:AMERICAN INDUSTRIAL SUPPLY INC.
Box:10816
City:GLENDALE
State:CA
ZIP:91209-3816
Country:US
Emergency Phone Num:818-500-0961
CAGE:0ENL6
=== Contractor Identification ===
Company:AMERICAN INDUSTRIAL SUPPLY INC
Box:10996
City:BURBANK
State:CA
ZIP:91510-0996
Country:US
Phone:818-841-7788
CAGE:0ENL6
Company:INDUSTRIAL FLOOR FINISHES
Address:605 SPRINGS RD
City:BEDFORD
State:MA
ZIP:01730
Country:US
Phone:1-617-667-5161
CAGE:INDUS
============= Composition/Information on Ingredients =============
Name:SULFURIC ACID (SARA III)
CAS:7664-93-9
RTECS #:WS5600000
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:O-DICHLOROBENZENE (SARA III)
CAS:95-50-1
RTECS #:CZ4500000
OSHA PEL:C 50 PPM
ACGIH TLV:S, 25PPM/50 STEL9394
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SAME AS SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:PRICKING OR BURNING SENSATION OF SKIN AND
MUCOUS MEMBRANES, COUGHING, TIGHTNESS OF CHEST, DIFFICULTY IN
BREATHING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES, SEEK MEDICAL ATTENTION. SKIN: PROLONGED/REPEATED CONTACT
MAY CAUSE IRRITATION. INHAL: REMOVE TO FRESH AIR. IF BREATHING IS
DIFFICULT ADM INISTER OXYGEN, IF BREATHING HAS STOPPED GIVE ARTF
RESP. SWALLOWED: DO NOT INDUCE VOMITING, SEEK MEDICAL ATTENTION
IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point:WILL NOT BURN
Extinguishing Media:WATER SPRAY, CO*2 & DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . NEUTRALIZE WITH LIME, SODA ASH, ETC.
Unusual Fire/Explosion Hazard:REACTS WITH MOST METALS WHEN DILUTED.
GIVES FLAMMABLE EXPLOSIVE HYDROGEN GAS.
================== Accidental Release Measures ==================
Spill Release Procedures:DIKE SPILL AREA. REMOVE SOURCES OF IGNITION.
VENTILATE AREA IF NECESSARY. RECOVER FREE LIQUID. ADD ABSORBENT TO
SPILL AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. REMOVE CONTAM CLTHG,
LAUNDER BEFORE REUSE. KEEP AWAY FROM SOURCES OF IGNIT. USE ONLY
W/ADEQ VENT. AVOID PRLNGD/RPTD CONT W/SKIN. A GOOD STANDARD OF PERS
& INDUSTRIAL HYG IENE SHOULD BE MAINTAINED AT ALL TIMES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT NORMALLY NEEDED IN WELL VENTILATED AREA. IF
TLV IS EXCEEDED A NIOSH/MSHA APPROVED BREATHING APPARATUS IS
RECOMMENDED.
Ventilation:LOCAL & MECHANICAL EXHAUST, AS NEC TO MAINTAIN EXPOS BELOW
TLV LEVEL. VENTILATE IF HIGH VAP CONC EXISTS.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EMERG.EYE WASH/DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
HCC:C1
Boiling Pt:B.P. Text:535F,279C
Melt/Freeze Pt:M.P/F.P Text:-31F,-35C
Vapor Density:3.4
Spec Gravity:1.70 TO 1.85
Evaporation Rate & Reference:<1 (BUTYL ACETATE = 1)
Solubility in Water:100%
Appearance and Odor:OILY CLEAR TO TURBID-ODORLESS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CO*2 & CO.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF ALL WASTES IN ACCORDANCE WITH
FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|