===================== Product Identification =====================
MSDS NAME:POWER CLEAN BLANKET WASH, 83-6-105452
NIIN:00N014922
MSDS Number: BKMPF
=== Responsible Party ===
Company:MULTIGRAPHICS
Address:1800 W CENTRAL ROAD
City:MT.PROSPECT
State:IL
ZIP:60056-2293
Country:US
Info Phone Num:312-870-5121/708-870-5087
Emergency Phone Num:312-870-5121 (DAY) 398-1900 (NIGHT)
CAGE:09177
=== Contractor Identification ===
Company:AM MULTIGRAPHICS DIV OF AM INTL INC
Address:431 LAKEVIEW CT
Box:City:MOUNT PROSPECT
State:IL
ZIP:60056-6048
Country:US
Phone:847-375-1700
CAGE:09177
============= Composition/Information on Ingredients =============
Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 95-98%
Other REC Limits:TRANS PEL: 500 PPM
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293
Name:PETROLEUM NAPHTHA
CAS:64742-95-6
Fraction by Wt: 2-5%
OSHA PEL:100 PPM (MFR)
ACGIH TLV:100 PPM (MFR)
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CONTACT WITH LIQUID IS
IRRITATING. SKIN: EXCESS CONTACT WILL DE-FAT SKIN AND CAUSE
IRRITATION AND DERMATITIS. INHAL: EXCESS INHAL CAN IRRITATE UPPER
RESP TRACT AND PRODUCE HDCH, NAUS, NARCOSIS, AND COMA DEPENDING ON
EXPOSURE. INGEST:TOXIC AND IRRIT TO GI TRACT. TARGET ORGANS: SKIN,
EYES, RESP SYS & CNS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE.
======================= First Aid Measures =======================
Eyes: FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. IF IRRITATION PERSISTS, GET MD. SKIN: WASH WITH SOAP AND
WATER. PROMPTLY REPLACE CONTAM CLOTHING. INHAL: REMOVE TO FRESH
AIR. RESTORE BREATHING, IF REQUIRED GET MD. INGEST:DO NOT INDUCE
VOMIT (ASPIRATION HAZARD). GIVE 1-2 TABLESPOONS VEGETABLE OIL. GET
MD IMMED.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:110F,43C
Lower Limits:0.8
Upper Limits:6.0
Extinguishing Media:CO*2, FOAM & DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER, IT WILL SPREAD.
Unusual Fire/Explosion Hazard:NONE.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB WITH RAGS OR SIMILAR ABSORBING
MATERIAL. IF ABOVE TLV, AN NIOSH/MSHA APPROVED ORGANIC VAPOR MASK
SHOULD BE USED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN ORIGINAL CONTAINER, TIGHTLY
CLOSED.
Other Precautions:READ AND FOLLOW PRECAUTIONS ON CONTAINER LABEL. DO
NOT REUSE THE CONTAINER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NORMAL VENTILATION.
Ventilation:LOCAL EXHAUST: ONLY TO REMAIN BELOW 50% OF TLV.
Protective Gloves:SOLVENT PROOF.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON. AN EYEWASH STATION AND SAFETY SHOWER
SHOULD BE READILY AVAILABLE IF SPLASHING MAY OCCUR.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:310F,154C
Vapor Pres:20C
Vapor Density:4.7
Spec Gravity:0.772
Evaporation Rate & Reference:3.5 (BUTYL ACETATE = 1)
Solubility in Water:INSOLUBLE
Appearance and Odor:VIOLET LIQUID, NAPHTHA ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY GENERATE CO
OR CO*2.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL CLASSIFIED AS EPA HAZARDOUS DUE TO
FLASH POINT. DISPOSE OF AS HAZARDOUS WASTE. DO NOT POUR DOWN COMMON
DRAIN.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|