===================== Product Identification =====================
MSDS NAME:SF-2 3M BRAND SECONDARY FLUID, 98-0211-4827
NIIN:00N015764
MSDS Number: BKRMX
=== Responsible Party ===
Company:MINNESOTA MINING AND MFG CO
Address:3M CTR 224-2S-25
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1341/612-733-1110
Emergency Phone Num:612-733-1341
CAGE:76381
=== Contractor Identification ===
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:PERFLUORO COMPOUNDS, C5-18
CAS:86508-42-1
Fraction by Wt: 100%
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: NOT EXPECTED TO PRDCE SIGNIFICANT
IRRIT OF EYES ON CONT. CONTAMS MAY BE INTRDCD THAT CAUSE IRRIT.
SKIN: NOT EXPECTED TO CAUSE SIGNIFICANT IRRIT AFTER LIMITED,DIRECT
CONTACT. CONTAMS MAY BE INTRDC D THAT CAUSE IRRIT. INHAL: HAZARD
W/VAPORS ARE EXPECTED TO BE LOW. ABOVE BP, SMALL AMTS OF TOXIC
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:HLTH HAZ: DECOMP PROD WHICH MAY INCL HF & PFIB
MAY OCCUR. HF HAS AN ACGIH TLV OF 3 PPM OF FLUORIDE AS CEILING LIM
& OSHA PEL 3 PPM OF FLUORIDE AS 8-HR TWA/6 PPM FLUORIDE AS A STEL.
PFIB HAS 3M RECOMM EXPOS GDLNE OF 0.01 PPM OF AIR AS A CEILING
VALUE. INGEST: PRACTICALLY NON TOXIC. CONTAMS MAY BE (SEE SUPP
DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. CALL MD.
SKIN: WASH AFFECTED AREA W/SOAP & WATER. INHALATION: IF EXPOSED TO
DECOMP PROD, REMOVE PERSON TO FRESH AIR. CALL MD. INGESTION: CALL A
MD OR POISON CNTRL CTR W/DETAILED DESCRIPTION.INCLUDE POSS MATL
THAT CONTAMD LIQUID DURING USE.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:NONE
Extinguishing Media:NOT FLAMMABLE
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC BY-PRODUCTS MAY FORM UPON
DECOMPOSITION.
================== Accidental Release Measures ==================
Spill Release Procedures:OBSERVE PRECAUTIONS FROM OTHER SECTIONS. COVER
W/INORG ABSORB MATERIAL. COLLECT SPILLED MATERIAL. PLACE IN A
CLOSED CONTATINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE ONLY IN AREAS W/SUFFICIENT LOCAL
EXHAUST VENT TO MAINTAIN AIRBORNE CONCS AT RECOGNIZED HLTH & SFTY
LEVELS. AVOID PROLONGED BRTHG OF VAPORS.
Other Precautions:DON'T BRTH THERMAL DECOMP PRODS. NO SMOKING. LOCAL
EXHAUST VENT W/A MIN CAPTURE VELOCITY 50 LIN FT PER MIN PROVIDED
FOR APPLICATNS AT/ABOVE BP. IF INTERFERING AIR CURRENTS,MIN CAPTURE
VELOCITY SHOULD BE AT LEAST 100 LIN FT PER MIN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF DECOMP OCCURS, IN THE ABSENCE OF ADEQUATE
VENTILATION, AN AIR SUPPLIED RESPIRATOR SHOULD BE WORN.
Ventilation:LOCAL EXHAUST RECOMMENDED FOR TEMPERATURES > OR AT BOILING
POINT.
Protective Gloves:NONE REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:SF-2 IS NOT EXPECTED TO PRESENT A HAZ WHEN USED
W/GOOD INDUSTRIAL HYGIENE PRACTICES.
Supplemental Safety and Health
EFTS OF OVEREXP: INTRDCD THAT ARE TOXIC BY INGESTION. NOT AN EXPECTED
ROUTE OF INDUSTRIAL EXPOS.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:158F,70C
Vapor Pres:80-400
Vapor Density:10-15
Spec Gravity:1.700 WATER=1
Evaporation Rate & Reference:>1 (BUTYL ACETATE = 1)
Solubility in Water:NIL
Appearance and Odor:COLORLESS, CLEAR, ODORLESS, LIQUID.
Percent Volatiles by Volume:100%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
FINELY DIVIDED ACTIVE METALS, ALKALI & ALKALINE EARTH METALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMP MAY PRDCE TRACE AMTS OF
HF & IN SOME CASES PFIB. TRACE DECOMP AT 200C & INCRD DECOMP
W/INCRD SURF TEMPS.
==================== Disposal Considerations ====================
Waste Disposal Methods:EVAP SMALL QTYS,<1 GAL, IN A HOOD. TO RECLAIM OR
RETURN, CONTACT YOUR 3M SALES REPRESENTATIVE.(NOT U.S. EPA
HAZARDOUS)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|