===================== Product Identification =====================
MSDS NAME:VITN FLUOROELASTOMER, A-35
NIIN:00N015706
MSDS Number: BKRML
=== Responsible Party ===
Company:DU PONT E I DE NEMOURS & CO INC
Address:1007 MARKET STREET
Box:1635
City:WILMINGTON
State:DE
ZIP:19898
Country:US
Info Phone Num:800-441-7515/MSDS 302-992-3511
Emergency Phone Num:800-441-3637/800-424-9300(CHEMTREC)
Preparer's Name:W.H. MARTIN
CAGE:18873
=== Contractor Identification ===
Company:E.I. DUPONT DE NEMOURS & CO
Address:1007 MARKET STREET
Box:City:WILMINGTON
State:DE
ZIP:19898
Country:US
Phone:800-441-7515;800-441-9442
CAGE:18873
============= Composition/Information on Ingredients =============
Name:ING 4:DEGRADED VITON PARTS. HAZARDOUS COMBUSTION
PRODUCTS:HYDROGEN FLUORIDE (HF), CARBONYL FLUORIDE, CARBON (SEE ING
6)
RTECS #:9999999ZZ
Name:ING 5:MONOXIDE/LOW MOLECULAR WEIGHT FLUOROCARBONS.
HNDLG/STOR PREC:VITRON/RELATED "CHEMICALS". VENT:FLUORIDE (SEE ING
7)
RTECS #:9999999ZZ
Name:ING 6:CONCENTRATION BELOW THE OSHA PEL OF 3 PPM.
RTECS #:9999999ZZ
Name:FLUORINATED SYNTHETIC RUBBER-ALT CAS# 25190-89-0
CAS:9011-17-0
Name:SUPP DATA:BUILD-UP. AVOID CONTAMINATION OF CIGARETTES OR
TOBACCO WITH POLYMER DUST.
RTECS #:9999999ZZ
Name:SUPP DATA:GLOVES PARTS OR EQUIPMENT AFTER EXPOSURE TO SUCH
HIGH TEMPS. IF CONDENSATE IS EXPECTED, WASH (SEE ING 4)
RTECS #:9999999ZZ
Name:ING 3:EQUIPMENT AND PARTS WELL WITH LIMEWATER (CALCIUM
HYDROXIDE SOLUTION). DISCARD GLOVES AFTER HNDLING (SEE ING 5)
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:LOW TOXICITY.
SKIN:PROLONGED CONTACT MAY PRODUCE IRRITATION. AVOID CONTACT.
EYE:MECHANICAL IRRITATION. INHAL:TOXIC AND CORROSIVE HYDROGEN
FLUORIDE MAY BE LIBERATED DURING PROCESSING ABOVE 200C, OR FROM
SMOKING TOBACCO OR CIGARETTES CONTAMINATED WITH RESIN DUST. THESE
VAPORS CAN (SEE EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:IRRITATE THE EYES, NOSE, THROAT, AND
LUNGS. LUNG EFFECTS MAY BE DELAYED FOR SEVERAL HOURS. CHRONIC:NONE
KNOWN.
Medical Cond Aggravated by Exposure:NONE KNOWN.
======================= First Aid Measures =======================
First Aid:INHAL:MOVE TO FRESH AIR. CALL MD IF SYMPTOMS PERSIST.
SKIN:WASH WITH SOAP AND WATER. IF MOLTEN POLYMER CONTACTS SKIN,
COOL RAPILDY WITH COLD WATER. DO NOT ATTEMPT TO PEEL POLYMER FROM
SKIN. OBTAIN MED ATTENTION FOR THERMAL BURN. EYE:FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINUTES. CONSULT MD IF SYMPTOMS PERSIST.
INGEST:CALL MD IMMEDIATELY .
===================== Fire Fighting Measures =====================
Flash Point Method:OC
Flash Point:>399F,>204C
Extinguishing Media:WATER, CARBON DIOXIDE, FOAM, DRY CHEMICALS.
Fire Fighting Procedures:DOES NOT BURN W/O EXTERNAL FLAME. WEAR
NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. WEAR NEOPRENE GLOVES WHEN
HNDLNG FEFUSE FROM FIRE INVOLVING VITON.(SEE ING 3)
Unusual Fire/Explosion Hazard:PELLET FORM MAY ACCUMULATE STATIC CHARGE
WHEN POURED FROM ONE CONTAINER TO ANOTHER. SEE ALSO MATERIALS TO
AVOID.
================== Accidental Release Measures ==================
Spill Release Procedures:SWEEP UP TO PREVENT SLIPPPING HAZARDS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL/DRY PLACE. KEEP CNTNRS
TIGHTLY CLSD TO PVNT MOISTURE ABSORPTION/CONTAM. BEFORE USING READ
BULLETIN VT-100 "HNDLG PRECS FOR (SEE ING 6)
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:VAPS/FUMES LIBERATED DURING HOT PROCESSING SHOULD BE
EXHAUSTED FROM THE WORK AREAS TO MAINTAIN HYDROGEN (SEE INGRED 6)
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:DO NOT TOUCH DECOMPOSED PARTS OF VITON EVEN
WHEN COOL.
Supplemental Safety and Health
FIRE FIGHT PROC:IF FUMES REACT W/WATER TO FORM HYDROFLUORIC ACID. HAZ
DECOMP PROD:316 C (600F), THE SURFACE OF PARTS MAY CONTAIN HF OR HF
CONDENSATE, WHICH MAY CAUSE SEVERE BURNS, SOMETIMES W/SYMPS DE
LAYED FOR SEVERAL HOURS. WEAR NEOPRENE OR PVC (IF TEMP IS BELOW
MELTING POINT OF PVC) GLOVES WHEN HANDLING (SEE ING 3)
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.77-1.86
Solubility in Water:INSOLUBLE
Appearance and Odor:PELLETS, CHIPS, OR SHEETS, ODORLESS
================= Stability and Reactivity Data =================
COMPOUNDING WITH FINELY DIVIDED METALS SUCH AS ALUMINUM PRESENTS AN
EXPLOSION HAZARD.
Stability Condition to Avoid:TEMPERATURES ABOVE 200C WITHOUT ADEQUATE
VENTILATION WHEN COMPOUNDING INGREDIENTS ARE PRESENT. SEE BULLETIN
VT-1000.
Hazardous Decomposition Products:HYDROGEN FLUORIDE
(HF)/PERFLUOROOLEFINS. OSHA PEL FOR HF IS 3 PPM. IF VITON IS USED
OR TESTED AT TEMPS ABOVE (SUPP DATA)
==================== Disposal Considerations ====================
Waste Disposal Methods:LANDFILL OR INCINERATE IN COMPLIANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. INCINERATION REQUIRES
SCRUBBING OF GASEOUS PRODUCTS TO REMOVE HYDROGEN FLUORIDE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|