| MSDS | : | FC-2175 FLUOREL BRAND FLUOROELASTOMER, 98-0 | | CAS | : | 9011-17-0 | | NAME | : | 1-propene,1,1,2,3,3,3-hexafluoro-,polymer with
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:FC-2175 FLUOREL BRAND FLUOROELASTOMER, 98-0
NIIN:00N015761
MSDS Number: BKRMV
=== Responsible Party ===
Company:MINNESOTA MINING AND MFG CO
Address:3M CTR 224-2S-25
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1341/612-733-1110
Emergency Phone Num:612-733-1341
CAGE:76381
=== Contractor Identification ===
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:1-PROPENE,1,1,2,3,3,3-HEXAFLUORO-,POLYMER WITH
1,1-DIFLUOROETHENE
CAS:9011-17-0
Fraction by Wt: 100%
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:LOW IRRIT POTNTL. SKIN:ANIMAL
STUDIES INDICATE FLUOROELASTOMERS ARE NON-IRRIT DERMALLY. PERSONS
WORKING W/PROD WOULD HAVE A LOW POTNTL FOR DEVELOPING SKIN IRRIT.
INHAL:NO HAZARD AT TEMPS BELOW THE RMAL DECOMP PT. AT TEMPS >660 F,
BREAKDOWN TO HF & SHORT CHAIN FLUOROCARBONS, WHICH ARE IRRIT & (SEE
EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:TOXIC, BEGINS. INGEST:NOT APPLICABLE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE CONTACT: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT
LEAST 15 MIN. CALL A PHYSICIAN. SKIN CONTACT: WASH AFFECTED AREA
WITH SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR. INGEST:CALL
MD IMMEDIA TELY .
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:>600F,>316C
Extinguishing Media:WATER, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC BY-PRODUCTS, INCLUDING HF, MAY BE
FORMED.
================== Accidental Release Measures ==================
Spill Release Procedures:OBSERVE PRECAUTIONS FROM OTHER SECTIONS.
COLLECT SPILLED MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID INHAL OF DECOMP PRODUCTS. STORE
BELOW 100F. PREVENT MOISTURE CONTAM. DO NOT SMOKE WHILE HANDLING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF DECOMPOSITION OCCURS, USE USE NIOSH/MSHA
APPROVED ORGANIC VAPOR AND ACID GAS CARTRIDGE MASK.
Ventilation:GENERAL VENTILATION BELOW 660 F. LOCAL EXHAUST RECOMMENDED
ABOVE 660 F.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NORMAL INDUSTRIAL ATTIRE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WASTE DISP METH: BEFORE DISPOSAL. U.S. EPA HAZARDOUS WASTE NO.: NONE.
DISPOSAL MUST BE I/A/W FEDERAL, STATE, LOCAL REGULATIONS .
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.8
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW TO AMBER, TRANSLUCENT, RUBBERY SOLID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AL OR MG POWDER & HIGH SHEAR/TEMPERATURE CONDITIONS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
TOXIC MATERIALS INCLUDING HF.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISP OF WASTE PROD IN A SANIT LANDFILL. DISPOS
ALTERNATIVE: MIX W/FLAM MATL & INCIN IN AN INDUSTRIAL OR COMMERCIAL
FACILITY. COMBUSTION PRODS WILL INCLUDE HF. SINCE REGULATIONS VARY,
CONSULT APPLICABL E REGULATIONS OR AUTHORITIES (SEE SUPP DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|