===================== Product Identification =====================
MSDS NAME:REPAIR PRIMER FOR PARYLENE
NIIN:00F008071
MSDS Number: BBZFY
=== Responsible Party ===
Company:RAMTECH LABORATORIES, INC
Address:14104 ORANGE AVE
City:PARAMOUNT
State:CA
ZIP:90723
Info Phone Num:(213) 633-4824
Emergency Phone Num:(213) 633-4824
CAGE:2Y680
=== Contractor Identification ===
Company:RAMTECH LABORATORIES, INC
Address:14104 ORANGE AVE
Box:City:PARAMOUNT
State:CA
ZIP:90723
Phone:(213) 633-4824
CAGE:2Y680
============= Composition/Information on Ingredients =============
Name:EPOXY RESIN
Fraction by Wt: 4.5%
Name:TETRAHYDROFURAN (SARA III)
CAS:109-99-9
RTECS #:LU5950000
Fraction by Wt: 91.0%
Other REC Limits:200 PPM
OSHA PEL:200 PPM/250 STEL
ACGIH TLV:200 PPM/250STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:VINYLIDENE CHLORIDE (1,1-DICHLOROETHYLENE) (SARA III)
CAS:75-35-4
RTECS #:KV9275000
Fraction by Wt: 4.5%
Other REC Limits:5 PPM
OSHA PEL:1 PPM
ACGIH TLV:5 PPM/20 STEL; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO EYES & MUCOUS MEMBRANES.
NARCOTIC IN HIGH CONCENTRATIONS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATING TO EYES & MUCOUS MEMBRANES. NARCOTIC
IN HIGH CONCENTRATIONS.
======================= First Aid Measures =======================
First Aid:TREAT AS AN ACUTE LOCAL IRRITANT. REPORT TO DOCTOR.
===================== Fire Fighting Measures =====================
Flash Point Method:OC
Flash Point:1F
Lower Limits:2.3%
Upper Limits:11.8%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:SPARK, FLAME
================== Accidental Release Measures ==================
Spill Release Procedures:FLUSH WITH WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:IF MATERIAL COMES IN CONTACT WITH
SKIN, FLUSH WITH RUNNING WATER THEN WASH USING SOAP. STORE AT A
TEMPERATURE BETWEEN 50 & 100F.
Other Precautions:AFTER APPLYING REPAIR PRIMER ALLOW SOLVENT TO
EVAPORATE PRIOR TO HEATING.
============= Exposure Controls/Personal Protection =============
Ventilation:LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES, FACE SHIELD
Other Protective Equipment:APRON
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:155F
Vapor Pres:114
Vapor Density:2.5
Spec Gravity:0.92
Solubility in Water:MISCIBLE
Appearance and Odor:CLEAR LIQUID WITH AMBER TINT, ETHER LIKE ODOR
Percent Volatiles by Volume:90.0%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
SOLVENT WILL SWELL MOST RUBBER & SOME PLASTIC.
Stability Condition to Avoid:TEMPERATURES >100F. SPARKS, FLAME
==================== Disposal Considerations ====================
Waste Disposal Methods:CAN BE DILUTED WITH WATER & DISPOSED AS ANY
FLAMMABLE MATERIAL. DON'T DISPOSE OF LIQUID INTO DRAINS OR SEWERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|