Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT MATERIAL.
LIQUID IS SLIPPERY & MAY CAUSE FALL; WASH THOROUGHLY RESIDUE
REMAINING AFTER MATERIAL HAS BEEN COLLECTED WITH ABSORBENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:DONOT SWALLOW-MAY BE HARMFUL OR
FATAL.INDUCE IMMEDIATE VOMITING & OBTAIN MEDICAL TREATMENT;AVOID
EYE CONTACT:MATERIAL IS AN ABRASIVE.
Other Precautions:LIQUID DIFFICULT TO REMOVE & MUST BE FLUSHED W/LARGE
AMTS. OF H*2O.MATERIAL IS WATER SOLUBLE:AVOID DIRECT FUME
INHALATION & PROLONGED SKIN CONTACT.
Respiratory Protection:NONE NEEDED
Ventilation:MECHANICAL TYPE RECOMMENDED
Protective Gloves:IN SPECIAL CASE
Eye Protection:OSHA 29CFR 1914.133
Other Protective Equipment:NONE
Supplemental Safety and Health
PH OF SUSPENSION: 8 TO 10.
Waste Disposal Methods:SMALL QUANTITIES:SANITARY SEWER WITH WATER.LARGE
DISPOSAL:DRUM COLLECTION IAW FED,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.