Spill Release Procedures:SMALL SPILL:CLEAN UP WITH R-113 OR
PERCHLOROETHYLENE OR EQUIVALENT:LARGE SPILL:STOP SPILL AT
SOURCE,DIKE SPILL AREA & PUMP LIQUID TO SALVAGE TANK.CLEAN UP
REMAINING LIQ BY ABSORBING ON AN APPROPRIATE ABSORBING MATL.&
SHOVEL INTO DISPOSAL CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL/DRY PLACE.USE REASONABLE
CARE.
Respiratory Protection:UNK
Ventilation:MECHANICAL(GEN)
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:AS REQUIRED BY LOCAL AUTHORITIES.
Supplemental Safety and Health
MAY 19,82:MFR STATED THAT PRODUCT IS A POLYMER SOLN OF
CHLOROTRIFLUOROETHYLENE TELOMER & IS NOT CONSIDERED HEALTH HAZARD.
TELOMER' IS BASIC UNIT FOR POLYMERIZATIONS.
Waste Disposal Methods:MATL ABSORBED ON ABSORBENT MATERIAL CAN BE
DEPOSITED IN A LANDFILL IAW LOCAL,STATE & FED REGS.CONTACT
HALOCARBON PRODUCT CORP.IF THERE ARE ANY QUESTIONS REGARDING LIQ
DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.