===================== Product Identification =====================
MSDS NAME:#593 PUTTY-COTE
NIIN:00N018488
MSDS Number: BLFRG
=== Responsible Party ===
Company:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PARKWAY NW
City:ATLANTA
State:GA
ZIP:30331-1098
Country:US
Info Phone Num:800-241-3386
Emergency Phone Num:404-696-2730; 404-971-1502
Preparer's Name:M WHEELOCK
CAGE:16522
=== Contractor Identification ===
Company:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522
============= Composition/Information on Ingredients =============
Name:UNSATURATED POLYESTER RESIN
Fraction by Wt: <25%
Name:STYRENE, MONOMER (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 18%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192
Name:CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9192
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY CAUSE EYE & SKIN IRRIT. VAPS
MAY CAUSE MUC MEMB IRRIT & UPPER RESP TRACT DISCOMFORT.
CHRONIC:RPTD EXPOS TO HIGH CONC OF VAP MAY CAUSE LIVER & KIDNEY
DMG. EYES:MAY CAUSE IRRIT. LIQ SPLASHES M AY RESULT IN MORE SERIOUS
INJURIES. MAYCAUSE TEARING. SKIN: PRLNG/FREQUENT CONTACT MAY CAUSE
DEFATTING (EFT OF OVEREXP)
Explanation of Carcinogenicity:STYRENE MONOMER:GROUP 2B(IARC).
Effects of Overexposure:HLTH HAZ:& DRYNESS OF SKIN W/RESULTANT IRRIT &
POSS DERM. STYRENE MAY BE ABSORBED THROUGH SKIN IN TOXIC AMOUNTS.
INHAL: VAPORS MAY CAUSE MUC MEMB IRRIT & UPPER RESP TRACT
DISCOMFORT. HIGH CONC MAY RES ULT IN HDCH, NAUS, INSENSIBILITY &
OTHER CNS EFFECTS. INGEST:MAY CAUSE GI DISTURBANCES, PAIN &
DISCOMFORT.
Medical Cond Aggravated by Exposure:INDIVIDUALS W/CHRONIC RESPIRATORY
CONDITIONS (I.E., ASTHMA, CHRONIC BRONCHITIS, EMPHYSEMA, ETC) MAY
BE ADVERSELY AFFECTED BY ANY FUME OR AIRBORNE PARTICULATE MATTER
EXPOSURE.
======================= First Aid Measures =======================
Eyes:FLUSH W/PLENTY OF WATER FOR @ LST 15 MIN. GET MD IMMED.
SKIN:WASH W/SOAP & WATER. INHAL:REMOVE VICTIM FROM EXPOSURE. IF
UNCONSCIOUS, ADMIN ARTF RESP AND/OR O2 AS NEEDED. GET MD. INGEST:DO
NOT IND UCE VOMIT (ASPIRATION HAZARD). GET MD IMMED.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:SEE INGRED 2
Lower Limits:SEE ING 2
Upper Limits:SEE ING 2
Extinguishing Media:CO2, DRY CHEMICAL (SMALL FIRES), FOAM & WATER FOG
(LARGE FIRES).
Fire Fighting Procedures:COOL CONTAINERS WITH WATER. WEAR NIOSH/MSHA
APPROVED SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HIGH TEMPERATURE EXPOSURE FOR EXTENDED
PERIODS OF TIME WILL RESULT IN SPONTANEOUS UNCONTROLLED EXOTHERMIC
POLYMERIZATION.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT. VENT AREA. ABSORB
SPILL W/ABSORB MATL SUCH AS SAWDUST, VERMICULITE/SAND & PLACE IN
CLSD CNTNR. IF LARGE SPILL, DIKE AREA TO PREVENT MATL FROM ENTERING
WATER SYSTEMS/SEWERS .
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID STORAGE ABOVE 100F. AVOID
PRLNG/RPTD SKIN CONTACT. AVOID INHAL OF VAPORS OR SPRAY MISTS. KEEP
OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
IF PEL/TLV IS EXCEEDED. APPROPRIATE RESPIRATOR SELECTION DEPENDS
UPON TYPE & MAGNITUDE OF EXPOSURE.
Ventilation:GEN VENT REQD DURING NORM USE. LOC VENT REQD DURING CERTAIN
OPERATIONS TO KEEP EXPOS LEVELS BELOW TLV LISTED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOGG, ADD FULL LENGTH (SUPDAT)
Other Protective Equipment:POLYVINYL ALCOHOL & POLYETHYLENE PROT
GARMENTS FOR PROT AGAINST MATL OF THIS CHEM CLASS. PROT CLTNG TO
PVNT SKIN(SUPDAT)
Work Hygienic Practices:WASH HANDS WITH SOAP & WATER AFTER EVERY USAGE.
Supplemental Safety and Health
EYE PROT:FACESHIELD TO GOGGLES . OTHER PROT EQUIP:CONTACT. EYE WASH
STATIONS & SAFETY SHOWERS SHOULD BE AVAILBLE.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:SEE ING 2
Vapor Pres:SEE ING 2
Vapor Density:SEE ING 2
Spec Gravity:1.6 +/- 0.15
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS PASTE, SHARP STYRENATED ODOR.
Percent Volatiles by Volume:18
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HEATING OF MATERIAL TO DECOMPOSITION
MAY CAUSE EMISSION OF IRRITATING, ACRID FUMES.
Conditions to Avoid Polymerization:HEAT & DIRECT SUNLIGHT.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS. IF DISCARDED, MATL & CNTNRS ARE CONSIDERED HAZARDOUS
WASTE BASED ON CHARACTERISTIC OF IGNITABILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SALT CAKE DISODIUM SULFATE, 6639
| 7757-82-6 |
|
SALT CAKE DISODIUM SULFATE, SX0760
| 7757-82-6 |
|
SALT CAKE DISODIUM SULFATE, SX0761
| 7757-82-6 |
|
SALT CAKE DISODIUM SULFATE, SX0759
| 7757-82-6 |
|
DIE GARD 89
| 8016-28-2
61788-76-9 |
|
ALL PURPOSE CLEANER
| 108-88-3
100-41-4
1330-20-7
98-82-8
103-65-1
123-42-2 |
|
2 N' 1 RUG SPOTTER (UN-AEROSOL)
| 111-76-2
9016-45-9
7732-18-5 |
|
GENERAL PURPOSE CLEANER/DEGREASER
| 111-76-2
9016-43-9
10213-79-3
7732-18-5 |
|
R & C SPRAY
| 75-28-5
64-17-5
64742-14-9
26002-80-2 |
|
WHITE COLD GLUE
| 7732-18-5
108-05-4 |
|
RUG DOCTOR STEAM DETERGENT
| |
|
WHITE POLISHING COMPOUND T-241
| 74641-44-2 |
|
RUG DOCTOR TRAFFIC LANE CLEANER
| 112-07-2 |
|
DUNPRIDE EXT LOW SHEEN LATEX, 3000
| 107-21-1
68855-54-9 |
|
MASTERPIECE LATEX SG ENAMEL, 1700
| 50-00-0
75-01-4
75-07-0
14808-60-7
75-21-8 |
|
SNOW GLAZE SY546
| |
|
RC-794 FINISHER
| 7732-18-5
9004-53-9 |
|
HURRI-SAFE HOT IMMERSION DEGREASER
| 111-76-2 |
|
SALT CAKE DISODIUM SULFATE,6647
| 7757-82-6 |
|
SALT CAKE DISODIUM SULFATE,SX0765
| 7757-82-6 |
|
SALT CAKE DISODIM SULFATE, SXO763
| 7757-82-6 |
|
SALT HALITE,SX0419
| 7647-14-5 |
|
SALT HALITE, SX0420
| 7647-14-5 |
|
SALT HALITE, SX0423
| 7647-14-5 |
|
SALT HALITE, 6404
| 7647-14-5 |
|
SALT HALITE, 6405
| 7647-14-5 |
|
SALT HALITE, 6406
| 7647-14-5 |
|
CORCOAT MSP 1
| 1333-82-0
13755-29-8 |
|
CORCOAT MSL
| 1333-82-0
7697-37-2
333-67-3
10028-18-9 |
|
CORCOAT MSP 3
| 7681-49-4
1333-82-0 |
|
FOUNTAIN STIMULATOR
| 71-48-7 |
|
LIQUID COBALT DRIER
| 61789-52-4
8012-95-1
8032-32-4
8042-47-5 |
|
106 FLASH RIGHT
| 75-09-2
8030-30-6 |
|
GUARDEX DRY ACID
| 10034-88-5 |
|
PADLOCK SEALER
| 107-21-1 |
|
NEUTRAL CLEANER
| 9002-93-1 |
|
# 624 TAN POLISHING COMPOUND
| 8008-20-6
61790-12-3
8006-39-1
1317-95-9 |
|
THOROGARD
| 7632-00-0 |
|
BEETLE 216-10 RESIN
| 71-36-3
50-00-0 |
|
# 956 ALUMINUM SOLDER PASTE
| 56-81-5
13826-83-0
111-41-1
1314-13-2
8009-03-8
7440-31-5
7440-22-4
7440-69-9 |
|
# 604 TAN POLISHING COMPOUNDS
| 8008-20-6
61790-12-3
8006-39-1
1317-95-9 |
|
#602 TAN POLISHING COMPOUND
| 8008-20-6
61790-12-3
8006-39-1
1317-95-9 |
|
#593 PUTTY-COTE
| 100-42-5
14807-96-6
1317-65-3
13463-67-7 |
|
#592, PUTTY-COTE
| 14807-96-6
1317-65-3
13463-67-7
100-42-5 |
|
#462 DYNA-GLASS
| 100-42-5
14807-96-6
63231-67-4 |
|
#464 DYNA-GLASS
| 14807-96-6
63231-67-4
100-42-5 |
|
820R WASH PRIMER SURFACE CHROME FREE
| 123-86-4
71-36-3
64-17-5
67-63-0
108-88-3 |
|
HIGH TEMP ALUMINUM
| 1330-20-7
108-88-3 |
|
SERPIFLEX SHIELD WHITE & CLEAR
| 50-00-0
75-07-0
108-05-4
107-21-1 |
|
PANDA WHITE BOARD CLEANER
| 67-63-0 |
|
|