Search   
MSDS  
:
 GLIPOLIN  CLEAR 1202
CAS  
:
 68072-13-9
1330-20-7
NAME  
:
 alkyd resin
xylenes (o-,m-,p- isomers) (sara iii)
=====================  Product Identification  =====================

MSDS NAME:GLIPOLIN  CLEAR 1202
NIIN:00N019660
MSDS Number: BLGWM
=== Responsible Party ===
Company:TAUBMANS PROPRIETARY LTD
Address:7-9 BIRMINGHAM AVE
City:VILLAWOOD
ZIP:84006
Country:AS
Info Phone Num:02-727-1200
Emergency Phone Num:02-727-1200
Preparer's Name:WATKINS
CAGE:Z0197
=== Contractor Identification ===
Company:TAUBMANS PROPRIETARY LTD
Address:7-9 BIRMINGHAM AVE
Box:City:VILLAWOOD
ZIP:84006
Country:AU
Phone:02-727-1200
CAGE:Z0197

=============  Composition/Information on Ingredients  =============

Name:ALKYD RESIN
CAS:68072-13-9
Fraction by Wt: 52%

Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 48%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITANT TO SKIN, EYES AND
    MUCOUS MEMBRANES. CHRONIC: MAY INITIATE DERMATITIS.INHAL:IRRITANT.
    NARCOTIC EFFECTS IN HIGH VAPOR CONCENTRATIONS. SKIN: DEFATS SKIN.
    IRRITANT. EYE: IRRITANT. INGEST:  HARMFUL.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: WASH THOROUGHLY WITH WATER FOR AT LEAST 15 MIN. SEEK
    MED ATTN. SKIN: REMOVE ALL CONTAMINATED CLOTHING. LAUNDER BEFORE
    RE-USE. WASH SKIN WITH AN INDUSTRIAL SKIN CLEANER OR WITH SOAP AND
    WATER. IN HAL: REMOVE TO FRESH AIR. APPLY ARTF RESP IF PATIENT IS
    NOT BREATHING. INGEST: IF SWALLOWED, DO NOT INDUCE VOMITING. GIVE A
    GLASS OF WATER. SEEK MED ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:78.8F,26.0C
Lower Limits:1.1%
Upper Limits:7.7%
Extinguishing Media:FOAM, (LARGE FIRES). DRY CHEMICAL, CO2, (SMALL
    FIRES).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . KEEP UNOPENED CONTAINERS COOL WITH WATER
    SPRAY.
Unusual Fire/Explosion Hazard:FLAMMABLE. EMITS TOXIC FUMES WHEN HEATED
    TO DECOMPOSITION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. VENTILATE AREA.
    ABSORB ON SAND. TRANSFER TO SEALED CONTAINERS WITH NON SPARKING
    TOOLS. DO NOT ALLOW INTO DRAINS OR WATERCOURSES. WEAR PROTECTIVE
    EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE, AWAY FROM
    HEAT, SPARKS AND OPEN FLAME. KEEP CONTAINERS SEALED WHEN NOT IN
    USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED CARTRIDGE
    RESPIRATOR. IN CONFINED AREAS OR LIMITED VENTILATION, WEAR
    NIOSH/MSHA APPROVED AIR SUPPLIED HOOD/MASK.
Ventilation:USE ADEQUATE VENTILATION MECH VENT IN CONFINED AREAS TO
    MAINTAIN SOLVENT LEVELS BELOW RECOMMENDED TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:KEEP SKIN CONTACT TO A MINIMUM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F4
Spec Gravity:1.02
Solubility in Water:INSOLUBLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN CHEMICAL WASTE DISPOSAL AREA IN
    ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
GASKET SEALANT TYPE 1 & TYPE II, 2-3 67-63-0
14807-96-6
61790-51-0
GASKET SEALANT TYPE 1 & TYPE II, 2-3C 67-63-0
14807-96-6
61790-51-0
GASKET SEALANT TYPE 1 & TYPE II, 2-11 67-63-0
14807-96-6
61790-51-0
SUPERLITE, 3421 100-42-5
14807-96-6
61790-53-2
SUPERLITE, 3427 100-42-5
14807-96-6
61790-53-2
SUPERLITE, 3425 100-42-5
14807-96-6
61790-53-2
SUPERLITE, 3424 100-42-5
14807-96-6
61790-53-2
SUPERLITE,3423 100-42-5
14807-96-6
61790-53-2
SUPERLITE, 3422 100-42-5
14807-96-6
ALUMINUM COATING CEMENT, 5170 8052-41-3
7429-90-5
12001-26-2
ALUMINUM COATING CEMENT, 5180 7429-90-5
12001-26-2
8052-41-3
ALUMINUM COATING CEMENT, 5183 8052-41-3
7429-90-5
12001-26-2
ALUMINUM COATING CEMENT, 5178 8052-41-3
7429-90-5
12001-26-2
ALUMINUM COATING CEMENT, 5177 8052-41-3
7429-90-5
12001-26-2
ARTIC BLUE 64742-52-5
LITHIUM/MANGANESE DIOXIDE BATTERY, DL2/3A 1333-86-4
7440-44-0
116-14-3
108-32-7
7439-93-2
1313-13-9
TIMESAVER LAPPING COMPOUNDS, 55N COARSE 14808-60-7
7727-43-7
TIMESAVER LAPPING COMPOUNDS, 77N MEDIUM 14808-60-7
7727-43-7
TIMESAVER LAPPING COMPOUNDS, 111 FINE 14808-60-7
7727-43-7
E-Z PAINT THINNER, 152-4768 8052-41-3
95-63-6
E-Z PAINT THINNER, 153-8149 8052-41-3
95-63-6
E-Z PAINT THINNER, 152-4784 8052-41-3
95-63-6
GLYPTAL, 4004 1330-20-7
110-80-5
108-10-1
71-36-3
7440-66-6
1317-61-9
13463-67-7
INSULATION MASTIC, PMI5 8052-42-4
14808-60-7
INSULATION MASTIC, PM11 8052-42-4
14808-60-7
NOVASOL 200 64742-96-6
1310-73-2
TWINKLE STAINLESS STEEL CLEANER & POLISH 71-55-6
124-38-9
THIXON, 814-1 1330-20-7
142-82-5
8032-32-4
1333-86-4
D-224 CLEAR PRIMER 50-00-0
108-95-2
67-56-1
108-10-1
108-88-3
71-36-3
TIN WIRE 1.00 MM DIAM 99.999%, 26570-5 7440-31-5
THALLIUM CARBONATE 99.99+%, 25576-9 6533-73-9
VARATHANE LIQUID PLASTIC, 60 8052-41-3
X-3D WOOD STAIN-TEAK, 317 8052-41-3
8008-20-6
GLASS CLEANER, JR309 67-63-0
111-76-2
1336-21-6
74-98-6
75-28-5
106-97-8
SANITIZER, JR-521
SLM-OD SILVERMASTER FOUNTAIN SOLUTION 107-21-1
1005/6500 YELLOW DEVELOPER, 5R90124(RX) 7440-02-0
25213-39-2
12225-18-2
S-100 SILICONE MOLD RELEASE, 50 1001 75-69-4
75-45-6
SPRAY & WASH AEROSOL 64-17-5
111-46-6
7732-18-5
9073-77-2
74-98-6
8012-95-1
SPRAY LAYOUT FLUIDS TRANSPARENT 74-98-6
75-28-5
106-97-8
123-86-4
64-17-5
71-36-3
9004-70-0
67-63-0
TIOLON X-20 AEROSOL 116-14-3
78-93-3
74-98-6
75-28-5
ALUMAZITE Z 7429-90-5
25085-82-9
78-93-3
7789-06-2
ALUMAZITE ZD 7429-90-5
25085-82-9
78-93-3
7789-06-2
PHENOLPHTHALEIN INDICATOR, 150 67-63-0
POLYURETHANE AEROSOL & BRUSHING 111-76-2
64742-47-8
108-88-3
67-64-1
68476-85-7
PEEL-AWAY II 67-56-1
7664-41-7
75-09-2
004SC 7439-92-1
7440-36-0
1309-60-0
7664-93-9
GLIPOLIN CLEAR 1202 68072-13-9
1330-20-7
GF 1000 SERIES FLUXES, GF-1050 8050-09-7
8006-64-2
DIRT FIGHTER INTERIOR LATEX SEMI-GLOSS (SUP 112-34-5
107-21-1
14808-60-7
13463-67-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com