===================== Product Identification =====================
MSDS NAME:EMULSIFIED ASPHALT MASTIC COMPOUND
NIIN:00N020339
MSDS Number: BLKGR
=== Responsible Party ===
Company:HAWKER MANUFACTURING INC
Address:308 S LABARON
City:MESA
State:AZ
ZIP:85210
Country:US
Info Phone Num:602-898-1217
Emergency Phone Num:602-898-1217
CAGE:1HX39
=== Contractor Identification ===
Company:HAWKER MANUFACTURING INC
Address:308 S LABARON
Box:City:MESA
State:AZ
ZIP:85210
Country:US
Phone:602-898-1217
CAGE:1HX39
============= Composition/Information on Ingredients =============
Name:ING 14:BEING CARRIED W/RUNOFF WATER INTO STORM SEWER OR
OTHER BODIES OF WATER.
RTECS #:9999999ZZ
Name:ASPHALT (PETROLEUM)
CAS:8052-42-4
RTECS #:CI9900000
Fraction by Wt: 20-40%
ACGIH TLV:5 MG/M3; (FUME);9192
Name:MINERAL FILLER; (CRUSHED MINERAL FILLER)
Fraction by Wt: 30-50%
Name:CELLULOSE FIBER/POLYETHYLENE
Fraction by Wt: 2-5%
Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 28-45%
Name:ACRYLIC LATEX; (ANIONIC ACRYLIC LATEX)
Fraction by Wt: 0-20%
Name:FIRST AID PROC:DFCLT, GET MD. IF LIQ PROD INHALED INTO
LUNGS, GET MD IMMED. IF BRTHG STOPS, BEGIN ARTF RESP &(SEE ING 7)
RTECS #:9999999ZZ
Name:ING 6:GET MD IMMED. INGEST:DO NOT INDUCE VOMIT. IF VOMIT
BEGINS, LOWER HEAD IN EFFORT TO PVNT VOMITUS FROM (SEE ING 8)
RTECS #:9999999ZZ
Name:ING 7:ENTERING LUNGS. GET MD. NEVER GIVE ANYTHING BY MOUTH
TO UNCONSCIOUS PERSON.
RTECS #:9999999ZZ
Name:SPILL PROC:SHOULD BE PICKED UP & PLACED IN PROPER CNTNRS
FOR STOR & ULTIMATE DISP. AVOID WASHING, DRAINING (SEE ING 10)
RTECS #:9999999ZZ
Name:ING 9:OR DIRECTING MATL TO STORM/SANITARY SEWERS, RIVERS,
STREAMS, LAKES & OTHER BODIES OF WATER.
RTECS #:9999999ZZ
Name:HNDLG/STOR PREC:SETTLEMENT & SOLIDIFICATION OF ASPHALT &
FILLERS IN BOTTOM OF TANK OR CONTAINER. MATL IS (SEE ING 12)
RTECS #:9999999ZZ
Name:ING 11:DISPERSIBLE & SOLUBLE IN WATER UNTIL WATER PHASE
EVAPORATES (CURES) &/OR ASPHALT PHASE PLATES ONTO (SEE ING 13)
RTECS #:9999999ZZ
Name:ING 12:SUBSTRATE (BREAKS). DO NOT USE EMULSIFIED ASPHALT
PRODS WHEN PRECIPITATION IS EXPECTED BEFORE (SEE ING 14)
RTECS #:9999999ZZ
Name:ING 13:EMULSIFIED ASPHALT WILL CURE/BREAK. PRECIPITATION ON
UNCURED EMULSIFIED ASPHALT MAY RESULT IN PRODUCT(SEE ING 15)
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HOT EMULSIFIED ASPHALT CAN CAUSE
THERMAL BURNS. PROD IS EYE IRRITANT & MAY BE SKIN IRRITANT TO SOME
INDIVIDUALS. DIRECT EXPOS TO EYES MAY CAUSE PERM EYE DMG. PROD MAY
CAUSE IRRIT TO EYES, SKIN & LUNGS AFTER RPTD EXPOS. MOUSE SKIN
PAINTING STUDIES BY IARC HAVE SHOWN THAT EXTRACT/FUME CONDENSATES
OF (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:ASPHALT/PETROLEUM-DERIVED MATLS HAVING
A BOILING POINT >700F & WHICH MAY BE SIMILAR TO INGREDS IN PROD,
CAUSED SKIN TUMORS. ANIMAL DATA SHOULD BE INTERPRETED CAUTIOUSLY
SINCE HLTH EFTS MAY BE DEPENDENT ON VARIABLES SUCH AS
SOLV-EXTRACTION PROCEDURE, SOURCE OF CRUDE OIL, MFG PROCESS & THAT
THESE (SUPP DATA)
Medical Cond Aggravated by Exposure:PERSONS W/SKIN RASH, IRRITATION OR
OTHER SKIN DISORDERS SHOULD NOT LET MATERIAL CONTACT AFFLICTED
AREAS.
======================= First Aid Measures =======================
First Aid:EYE:IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN & GET
MD. SKIN:REMOVE CONTAMD CLTHG AS SOON AS POSS. WASH EXPSD SKIN
THORO W/WATERLESS HAND CLEANER & SOAP & WATER. IF IRRIT DEVELOPS,
CALL MD. IF EXPSD TO HOT MATL & THERMAL BURNS SUSPECTED, IMMED
COOL W/COLD WATER. DO NOT ATTEMPT TO REMOVE MATL BUT CONTINUE TO
COOL EXPSD AREAS & GET MD IMMED. INHAL:REMOVE TO FRESH AIR. IF
BRTHG (SEE ING 6)
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:DRY CHEMICAL, FOAM, CARBON DIOXIDE, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER MAY CAUSE FROTHING. USE WATER TO KEEP
FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:MATL WILL NOT BURN UNTIL WATER HAS
EVAPORATED LEAVING ONLY ASPHALT RESIDUE & SOLIDS. ASPHALT RESIDUE
HAS FLASH POINT >400F (PMCC). CNTNRS CAN BURST (SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN SPILL IMMED IN SMALLEST AREA POSS.
RECOVER AS MUCH OF PROD AS POSS BY SHOVEL/MECH MEANS. UNCURED PROD
CAN BE ABSORBED BY MIXING W/DRY FLASH, DRY DIRT OR OTHER FINE, DRY
AGGREGATES. NON-REUSABL E PROD & CONTAMD SOILS & OTHER MATL (SEE
ING 9)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:FREEZING, OVERHEATING (NEAR BOILING),
EXTENDED STOR TIME & CONTAM MAY CAUSE PROD TO BREAK/SEPARATE,
RESULTING IN LUMPS OF ASPHALT &/OR (SEE ING 11)
Other Precautions:SKIN CNTCT SHOULD BE MINIMIZED. DO NOT USE SOLVENTS
TO CLEAN SKIN. SOLVENTS MAY CONTAIN INGREDS WHICH ARE CARCINOGENIC
&/OR CAUSE SKIN IRRIT. LAUNDER OR DISCARD CONTAMD CLTHG. DISCARD
CONTAMD LEATHER MATERIAL.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE REQUIRED FOR NORMAL CONDITIONS OF USE. IF
OPERATING CONDITIONS CAUSE MIST, USE NIOSH/MSHA APPROVED DUST/MIST
RESPIRATOR.
Ventilation:NORMAL VENTILATION UNLESS MIST CONCENTRATIONS EXCEED PEL,
THEN MECHANICAL VENTILATION SHOULD BE USED.
Protective Gloves:NEOPRENE OR NBR GLOVES.
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD.
Other Protective Equipment:LONG SLEEVE SHIRTS & FULL LENGTH PANTS
SHOULD BE WORN WHEN WORKING W/PRODUCT.
Work Hygienic Practices:CLEAN EXPOSED SKIN W/WATERLESS HAND CLEANER,
FOLLOWED BY SOAP & WATER.
Supplemental Safety and Health
EXPLO HAZ:IN FIRE DUE TO WATER VAPOR (STEAM) PRESS. EFTS OF
OVEREXP:STUDIES INVOLVED RPTD EXPOS TO SHAVED SKIN WHICH WAS NEVER
WASHED FREE OF TEST MATL. INTERMITTENT/OCCSNL SKIN CNTCT
W/PETROLEUM ASPH ALT & ASPHALT EMULSION BASED PRODS IS NOT EXPECTED
TO HAVE SERIOUS HLTH EFTS IF GOOD PERSONAL HYGIENE MEASURES
FOLLOWED.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.4
pH:8-10.5
Solubility in Water:DISPERSIBLE
Appearance and Odor:THICK BROWN MASTIC OR PASTE, VERY MILD ODOR.
Percent Volatiles by Volume:NONVOL
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS HYDROGEN PEROXIDE, BROMINE AND CHROMIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMBUSTION MAY FORM CO, CO2, NOX, SOX
AND OTHER HYDROCARBONS.
==================== Disposal Considerations ====================
Waste Disposal Methods:REUSE AS MUCH OF THE RECOVERABLE PRODUCT AS
POSSIBLE. DISPOSE OF NON-REUSABLE MATERIAL IN COMPLIANCE W/FEDERAL,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
CEL GLOSS-CLEAR (OLD E-26), BCEG026
| 108-88-3
67-63-0
111-15-9
1330-20-7 |
|
BRAYCOTE MICRONIC 803 HIGH TEMPERATURE HIGH
| |
|
ALUMINUM ALLOY 5086 (ROLLED PRODUCT)
| 7429-90-5
7440-21-3
1309-37-1
7440-50-8
7439-96-5
1309-48-4
7440-47-3
1314-13-2
13463-67-7 |
|
MAINTAIN CONCLEN
| |
|
PREP-A-LUBE
| 75-09-2 |
|
ONE STEP COLOR BLACK LIQUID, T-270C
| 8002-05-9
8002-05-9
64741-44-2
8006-64-2 |
|
MPG-2 AEROSOL
| 71-55-6
74-98-6
110-54-3
75-28-5 |
|
INTERPON 600 SERIES ZINC PRIMER JW102U PRIM
| 2451-62-9
13463-67-7
7440-66-6 |
|
HYDROSEP
| 18472-51-0 |
|
CADIUM SULFIDE IN LINSEED OIL
| 1306-23-6 |
|
THERMO-CHEM G-11
| 65997-17-3 |
|
DOLPHON
| 131-17-9 |
|
XTRACTION 11
| 111-76-2 |
|
PATHMAKER
| |
|
GU2500 INSL-THANE LINE, GU2512
| 8032-32-4
64-17-5 |
|
SPAULDITE, G-11-963
| |
|
RAGE, 106
| 100-42-5
14807-96-6 |
|
TACK FREE, 301
| 100-42-5
14807-96-6 |
|
TACK FREE, 297
| 100-42-5
14807-96-6 |
|
SIMONIZ TUFF STUFF FOAM CLEANER, AS192
| 111-76-2
10213-79-3
68439-50-9
75-28-5 |
|
601-87 2844-1109 COMPONENT A, 13-141
| 25068-38-6
64742-95-6
67762-90-7
1309-38-2 |
|
601-87 2844-1110 COMPONENT A, 13-142
| 64742-95-6
67762-90-7
20344-49-4
25068-38-6 |
|
601-87 2844-1111 COMPONENT A, 13-140
| 25068-38-6
64742-95-6
67762-90-7
1309-37-1 |
|
601-89 COMPONENT B, 13-143
| 68443-08-3
71-36-3
64742-47-8
67762-40-7 |
|
IP MARINE OIL G 30
| |
|
VALVATA OIL J680, 63053
| 64742-57-0
9003-27-4
68153-11-1 |
|
OMALA OIL 320, 65107
| 64742-70-7
64742-54-7
64742-57-0 |
|
ELECTRICALLY CONDUCTIVE COATING 599-A8219-(
| 7440-50-8
108-88-3
78-93-3
123-42-2
67-64-1
67-56-1 |
|
FERROUS ETHYLENEDIAMMONIUM SULFATE, 41
| 63589-59-3 |
|
MAGNESIUM PERCHLORATE, ANHYDROUS
| 10034-81-8 |
|
GERERATOR SOLUTION, 1613
| 109-86-4
7446-09-5
7553-56-2 |
|
LEAD PERCHLORATE HYDRATED
| 13637-76-8 |
|
AMMONIUM PERCHLORATE, 3
| 7790-98-9 |
|
BELZONA N.F. CLEANER/DEGREASER
| 71-55-6 |
|
EMULSIFIED ASPHALT MASTIC COMPOUND
| 8052-42-4
7732-18-5 |
|
HYDROCHLORIC ACID CONCENTRATED R-0616
| 7647-01-0 |
|
M-P-A 2000X, 32118
| 1330-20-7 |
|
DEGREASER HEAVY
| 1310-58-3
1310-73-2 |
|
SUPERCLEANS
| |
|
ECCOFOAM PT-24 PART A
| 106-89-8 |
|
ECCOFOAM PT-24 PART B BROWN
| |
|
RM 695 PRIMER-HARDENER
| 25513-64-8 |
|
RM 695 PRIMER-RESIN
| 25068-38-6
2425-79-8 |
|
SIKADUR 36 MARINE GEL PART A, 364
| 14808-60-7 |
|
2-3-DIPHOSPHOGLYCERIC ACID KIT, 35-A
| 9032-62-6
102-71-6
76-03-9
64-17-5 |
|
DIPICOLINIC ACID, D0759
| 499-83-2 |
|
DISTAMYCIN A HYDROCHLORIDE FROM STREPTOMYCE
| 6576-51-8 |
|
2,2'-DITHIO-BIS (5-NITROPYRIDINE), D9634
| 2127-10-8 |
|
DL-OCTOPAMINE HCL, 00250
| 770-05-8 |
|
CUSTOM PLASMA STANDARD, PLB9-3X
| |
|
|