===================== Product Identification =====================
MSDS NAME:STELLITE 31 AMS 5789
NIIN:00-171-1340
MSDS Number: BLVZT
=== Responsible Party ===
Company:UNITED STATES WELDING CORPORATION
Address:20700 DEARBORN STREET
City:CHATSWORTH
State:CA
ZIP:91311
Country:US
Info Phone Num:818-341-2021/213-341-2021
Emergency Phone Num:818-341-2021/213-341-2021
CAGE:58401
=== Contractor Identification ===
Company:UNITED STATES WELDING CORP
Address:3579 HWY 50 E SUITE 104
Box:City:CARSON CITY
State:NV
ZIP:89701-2807
Country:US
Phone:775-883-7878
CAGE:58401
============= Composition/Information on Ingredients =============
Name:COBALT (SARA III)
CAS:7440-48-4
RTECS #:GF8750000
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.1 MG/M3;AS CO
ACGIH TLV:0.05 MG/M3;DUST 9293
Name:CHROMIUM (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 25.5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:NICKEL (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 10.5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192
Name:TUNGSTEN
CAS:7440-33-7
RTECS #:YO7175000
Fraction by Wt: 7.5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:5 MG/M3/ 10 STEL
ACGIH TLV:5 MG/M3/10 STEL;9192
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYE:TEARING.SKIN/INGESTION:NOT
LIKELY.INHALATION:MAY RESULT IN DISCOMFORT SUCH AS
DIZZINESS,NAUSEA,DRYNESS/IRRITATION OF NOSE &
THROAT,HEADACHE,BREATHING DIFFICULTY,COUGHING AND/OR CHEST PAIN.SO
ME TOXIC GASES MAY CAUSE PULMONARY EDEMA &
DEATH.CHRONIC-NEUROLOGICAL DAMAGE,LUNG FIBROSIS & OTHER LUNG
DISEASES.
Explanation of Carcinogenicity:THIS MATERIAL CONTAINS NICKEL AND
CHROMIUM.
Effects of Overexposure:INHALATION MAY RESULT IN DISCOMFORT SUCH AS
WATERY EYES, DIZZINESS, NAUSEA, DRYNESS/IRRITATION OF NOSE &
THROAT, HEADACHE, BREATHING DIFFICULTY, FREQUENT COUGHING AND/OR
CHEST PAIN. SOME TOXIC GASES M AY CAUSE PULMONARY EDEMA,
ASPHYXIATION AND EXCESSIVE EXPOSURE CAN BE FATAL.
Medical Cond Aggravated by Exposure:PERSONS WITH IMPAIRED PULMONARY
FUNCTION, AIRWAY DISEASES AND CONDITION
======================= First Aid Measures =======================
First Aid:CALL A DOCTOR IF SYMPTOMS PERSIST.EYE:IMMEDIATELY FLUSH WITH
WATER FOR 15 MINUTES,HOLDING EYELIDS OPEN.SKIN:WASH WITH SOAP &
WATER.INHALATION:REMOVE TO FRESH AIR.PROVIDE CPR/OXYGEN IF
NEEDED.INGESTION :CALL A PHYSICIAN/POISON CONTROL
CENTERIMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:SOLID FORM IS NOT COMBUSTIBLE UNDER NORMAL
CONDITIONS. USE DRY CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:MOLTEN METAL ALLOYS MAY EXPLODE ON
CONTACT WITH WATER, THEY MAY ALSO REACT VIOLENTLY WITH WATER, RUST
AND CERTAIN METAL OXIDES (E.G. OXIDES OF CU, FE & PB).
================== Accidental Release Measures ==================
Spill Release Procedures:IN SOLID FORM, THIS MATERIAL POSES NO SPECIAL
CLEAN-UP PROBLEMS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORAGE-KEEP IN DRY PLACE.
Other Precautions:NO FOOD OR SMOKING IN WORK AREAS. WASH THOROUGHLY
AFTER HANDLING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:FOR CONDITIONS WHERE EXPOSURE TO DUST AND FUMES
IS APPARENT, A NIOSH APPROVED RESPIRATOR FOR DUST MISTS AND FUMES
APPROPRIATE TO THE CONCENTRATION MAY BE WORN. WHERE VAPORS ARE
GENERATED, A NIOSH APPR OVED ORGANIC RESPIRATOR IS RECOMMENDED.
Ventilation:LOCAL EXHAUST VENTILATION SHOULD BE USED TO CONTROL
EXPOSURE TO AIRBORNE FUMES WHENEVER POSSIBLE.
Protective Gloves:FLAME-PROOF WELDING GLOVES
Eye Protection:SAFETY GLASSES, UNDER WELDING HELMET
Other Protective Equipment:INSTALL EYE WASH STATION, APRON FOR WELDING
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, DRINKING,
SMOKING, OR USING TOILET FACILITIES. WASH CONTAMINATED CLOTHING
BEFORE REUSE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS FILLER METAL
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:METAL FUMES
==================== Disposal Considerations ====================
Waste Disposal Methods:PRIOR TO DISPOSAL, CONSIDER IF MATERIAL HAS
RECOVERY VALUE. DISCARD ANY PRODUCT IN ACCEPTABLE MANNER. DISPOSE
OF ALL WASTES IN ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|