Spill Release Procedures:REMOVE IGNITION SOURCES,VENTILATE AREA
WELL.ABSORB WITH VERMICULITE OR OTHER MATERIALS, SUCH AS
SAWDUST,RAGS,PAPER & PLACE IN CLOSED CONTAINER. USE NON SPARKING
TOOLS. WEAR PROPER PROTECTIVE EQUIPMENT DURING CLEAN UP.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM IGNITION SOURCES.KEEP
CONTAINERS CLOSED.DO NOT STORE ABOVE 120F.AVOID PHYSICAL DAMAGE.
Other Precautions:WASH THOROUGHLY AFTER HANDLING AND BEFORE EATING OR
SMOKING.ABSERVE LABEL PRECAUTIONS.CONTAINERS SHOULD BE GROUNDED
WHEN POURING.
Respiratory Protection:USE ADEQUAT VENT.CARTRIDG-TYPE RESPIR IF MECH
CONTROLS NOT FEASIBLE.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV AND LEL.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:USE APPROPIATE HYGIENE PRACTICES.
Supplemental Safety and Health
VAPOR PRESSURE & DENSITY FOR PRINCIPAL SOLVENT.MSDS EFFECTIVE:1/2/74.
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.