Spill Release Procedures:USE PROTECTIVE EQUIPMENT SUCH AS GLOVES/SAFETY
GLASSES.SWEEP UP TO PREVENT SLIPPING HAZARD ON POLYMER
GRANULES.PLACE IN CLOSED CONTAINERS FOR LATER DISPOSAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:DRY STORAGE.KEEP CONTAINER CLOSED TO
PREVENT CONTAMINATION BY MOISTURE ABSORPTION.
Other Precautions:WEAR GLOVES WHEN NYLON IS HOT;USE SAFETY GLASSES
DURING PROCESSING.
Respiratory Protection:NONE UNDER NORMAL PROCESSING
Ventilation:LOCAL EXHAUST AT MOLDING MACHINE
Protective Gloves:SEE OTHER PRECA
Eye Protection:SEE OTHER PRECAUTIONS
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS UNDATED;MFR SPECIFIES THAT APPROX FLASH POINT 750F IS ESTIMATED
VALUE BASED ON OTHER NYLONS USING ASTM D-1929 METHOD.
Waste Disposal Methods:MFR SPECIFIES INCINERATION OR LANDFILL IN
COMPLIANCE W/LOCAL STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.