LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS MATERIAL WHEN USED AS INTENDED
DOES NOT REPRESENT A HEALTH OR SAFETY HAZARD. DERMAL/ORAL:
PRACTICALLY NON-TOXIC. EYE: MINIMALLY IRRITATING. SKIN: NOT A
SENSITIZER, MILDLY IRRITATING.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MINIMAL RESPIRATORY TRACT IRRITATION MAY OCCUR
ON CONTINUOUS EXPOSURE TO HIGH CONCENTRATIONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes: FLUSH EYES THOROUGHLY WITH WATER FOR AT LEAST 15 MIN.
SKIN: WASH WITH SOAP AND WATER. INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING. (GIVE O*2/ARTF RESP) . INGEST: GET MD IMMEDIATELY (FP N
).
===================== Fire Fighting Measures =====================
Flash Point Method:OC
Flash Point:>600F,>316C
Extinguishing Media:WATER, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT SHOULD BE WORN IN FIGHTING FIRES INVOLVING CHEMICALS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Spill Release Procedures:USE ABSORBANT MATERIAL TO COLLECT AND CONTAIN
FOR SALVAGE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:SAFETY GLASSES AS A MINIMUM. AVOID
HANDLING AT ELEVATED TEMPERATURES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Respiratory Protection:NONE REQUIRED WHEN USE AS INTENDED IN COPIER OR
PRINTER EQUIPMENT. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:FOR USE OTHER THAN NORMAL CUSTOMER-OPERATING
PROCEDURES, GOGGLES AND RESPIRATORS MAY BE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:< 5
Spec Gravity:0.98
Evaporation Rate & Reference:< 1 (ETHER=1)
Solubility in Water:< 0.1 %
Appearance and Odor:VERY LITTLE ODOR, LIQUID, NO COLOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SIO*2, CO, AND TRACES OF INCOMPLETELY
BURNED CARBON PRODUCTS.
Waste Disposal Methods:DO NOT INCINERATE. NO SPECIAL TECHNIQUES BEYOND
NORMAL PRACTICE. INSURE CONFORMITY WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.