Search   
MSDS  : EPOXY ADHESIVE 2 COMPONENT NSRDC 2844-11-2
CAS  : 71-36-3
NAME  : polyamide (mfg lists a tlv of 15 ppm)
epoxy (mfg lists a tlv of 26 ppm)
n-butyl alcohol (sara iii)
===================== Product Identification =====================

MSDS NAME:EPOXY ADHESIVE 2 COMPONENT NSRDC 2844-11-2
NIIN:00N000079
MSDS Number: BCDRB
=== Responsible Party ===
Company:PRO-LINE PAINT CO
Emergency Phone Num:(714) 232-8969
CAGE:9D157
=== Contractor Identification ===
Company:PRO-LINE PAINT CO
Address:2646 MAIN STREET
Box:City:SAN DIEGO
State:CA
ZIP:92113-3697
Country:US
Phone:619-231-2313; 619-232-8968
CAGE:9D157

============= Composition/Information on Ingredients =============

Name:POLYAMIDE (MFG LISTS A TLV OF 15 PPM)
Fraction by Wt: 29.0%

Name:EPOXY (MFG LISTS A TLV OF 26 PPM)
Fraction by Wt: 43.0%

Name:N-BUTYL ALCOHOL (SARA III)
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 7.0%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

===================== Hazards Identification =====================

Effects of Overexposure:SLIGHT IRRIT OF NOSE, SKIN, & THROAT. DIZZINESS
& VOMITING MAY BE CAUSED BY INTOXICATION.

======================= First Aid Measures =======================

First Aid:REMOVE TO FRESH AIR. WASH OVER EXPOSED AREAS ON BODY W/ WATER
& SOAP. FLUSH W/ WATER FOR 5 MINUTES. REMOVE CONTAMINATED CLOTHING.
CONSULT PHYSICIAN.

===================== Fire Fighting Measures =====================

Flash Point Method:CC
Flash Point:102F,39C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL OR STEAM
Fire Fighting Procedures:RESPIR. PROTECTION REQ'D & BLANKET FLAME W/
EXTING. MEDIA.

================== Accidental Release Measures ==================

Spill Release Procedures:REMOVE IGNITION SOURCES, PROVIDE SUFFICIENT
VENTILATION. PROTECT CLEAN-UP MAN W/ RESPIRATOR & SKIN PROTECTION.
USE NON-SPARKING TOOLS.

====================== Handling and Storage ======================

Handling and Storage Precautions:KEEP AWAY FROM OPEN FLAME & HEAT
SOURCES. DO NOT STORE AT TEMPERATURES ABOVE 99F.
Other Precautions:EQUIP STORAGE W/ FIRE EXTINGUISHER, VENTILATION.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:CONFINED AREA: USE APPROVED AIR RESPIRATOR OR
AIRFED HOOD
Ventilation:SUCTION FAN
Eye Protection:GOGGLES
Other Protective Equipment:A.S.M.E. RESPIRATOR
Supplemental Safety and Health
ADDRESS: 2646 MAIN ST., SAN DIEGO, CALIF. 92113. ADDITIONAL EMERGENCY
NUMBER: (714) 297-2976.

================== Physical/Chemical Properties ==================

Boiling Pt:B.P. Text:243 F
Vapor Pres:4
Vapor Density:2.60
Spec Gravity:1.2300
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY LIQUID
Percent Volatiles by Volume:10.0

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES

==================== Disposal Considerations ====================

Waste Disposal Methods:IN ACCORDANCE W/ FED., STATE & LOCAL
REGULATIONS. SUMP SPILLED MATERIAL IN CONTAINERS & CLOSE
IMMEDIATELY. OPEN CONTAINERS & DUMP MATERIAL ACCORDING TO ABOVE
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
TURTLE WAX; POLISH 8030-30-6
ETERNAFLEX-PT A URETHANE SEALANT 1700 1317-65-3
13463-67-7
ETERNZFLEX PT-B URETHANE SEALANT 1720-000
FLUOSILICIC ACID 16961-83-4
EPOXY ADHESIVE 2 COMPONENT NSRDC 2844-11-2 71-36-3
T-PD THINNER 71-55-6
75-09-2
108-88-3
SLCC-A CORROSION INHIBITOR (REVISED 12/85) 110-91-8
7732-18-5
KEM LUSTRAL ENAMEL-F65 G9;EMERALD GREEN 7439-92-1
8030-30-6
1330-20-7
SUPER POXEE-EPOXY RESIN
LAMINAR X-500 GREEN #34108 URETHANE COATING 584-84-9
7758-97-6
111-15-9
141-78-6
108-88-3
LAMINAR X-500 WHITE #27875 POLYURETHANE 111-15-9
141-78-6
108-88-3
1330-20-7
108-94-1
EPON CURING AGENT V-40
WELD-ON 3 FOR ACRYLIC 75-09-2
79-01-6
80-62-6
CATALYST 3332 614-45-9
HAMM-R AEROSOL SPRAY 1330-20-7
67-64-1
75-09-2
108-88-3
110-80-5
FORMULA 990 7647-01-0
RUST BAN EX 6671 LIGHT GRAY 1330-20-7
108-10-1
111-76-2
13463-67-7
E.C. CATALYST 5725 108-88-3
PLASTILOCK 605-4 78-93-3
108-90-7
108-10-1
67-63-0
EPON RESIN 8715
ZEP PHASE I (ACID PHASE TRUCK WSHNG CMPD) 7664-38-2
7664-39-3
PERMABOND SUPER GLUE' NO.130 137-05-3
SATINHIDE ALKYD LO-LUSTRE ENAMEL-BONE WHITE 8002-05-9
1330-20-7
96-29-7
602 SPEEDY BLOCKOUT, FAST DEY PRIMER
FUSE ON 905 108-94-1
109-99-9
78-93-3
ZEP BIG Z 1310-73-2
GC-1300 CLASS 1,2 OR 3 1309-60-0
LIGHT GRAY ENAMEL
YORK OIL C 8012-95-1
WEBTEX 43,SBR LATEX ADHESIVE 108-88-3
4111 GEAR OIL
3880 ADWELD 108-88-3
DOLPHS T-200X, XYLOL 1330-20-7
AUTOMATIC BLANKET WASH 4-1235 127-18-4
AUTOMATIC BLANKET WASH 4-1237 127-18-4
AUTOMATIC BLANKET WASH 4-1239 127-18-4
DIETHYL THIOUREA 105-55-5
GACOFLE H-2221R CARBON HYPALON 108-88-3
1330-20-7
71-23-8
GACOFLEX H-2202 GRAY HYPALON 108-88-3
1330-20-7
110-19-0
71-23-8
INDUSTRIAL ENAMEL BLACK, B54-B-11 8030-30-6
107-41-5
FLUOROGLIDE C.P. BULK 116-14-3
KRONITEX MP-280,TXP, MIL-H-19457B, TY 1
KRONITEX MP-600
MAGNUS 767 75-09-2
563-54-2
1336-21-6
67-63-0
NICKEL PENTRATE 1310-73-2
7631-99-4
7632-00-0
MIL-P-52192 B EPOXY PRIMER COATING 1330-20-7
109-86-4
108-10-1
OMEGA 4-852,MIL-R-25134 1336-21-6
LUBRIPLATE APG-90 8012-95-1
NELCO RED PRIMER, CM 337 67-56-1
108-10-1
108-88-3
71-36-3
50-00-0
108-95-2
BK UNIVERSAL CEMENT 765-1198 71-55-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net