===================== Product Identification =====================
MSDS NAME:PHENOLINE THINNER
NIIN:00N000310
MSDS Number: BCFCZ
=== Responsible Party ===
Company:CARBOLINE CO
Address:350 S HANLEY RD
City:ST. LOUIS
State:MO
ZIP:63144-1510
Country:US
CAGE:06634
=== Contractor Identification ===
Company:CARBOLINE CO
Address:350 S HANLEY INDUSTRIAL CT
Box:City:ST. LOUIS
State:MO
ZIP:63144-1599
Country:US
Phone:314-644-1000
CAGE:06634
============= Composition/Information on Ingredients =============
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 60%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:2-ETHOXYETHANOL (EGEE) (SARA III)
CAS:110-80-5
RTECS #:KK8050000
Fraction by Wt: 20%
OSHA PEL:S,200 PPM
ACGIH TLV:S, 5 PPM; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:PENTOXONE, 4-METHOXY-4-METHYL-PENTONONE-2
CAS:107-70-0
RTECS #:SA9185000
Fraction by Wt: 20%
ACGIH TLV:100PPM, MFR
===================== Hazards Identification =====================
Effects of Overexposure:VAPOR: EYE IRRIT, IRRIT OF RESP TRACT, DIZZ,
NAUSEA
======================= First Aid Measures =======================
First Aid:INH: MOVE TO FRESH AIR. CALL MD. EYE: IMMED FLUSH W/WATER AT
LEAST 15 MIN. CALL MD. SKIN: WASH THOROUGHLY W/MILD SOAP & WATER.
===================== Fire Fighting Measures =====================
Flash Point:77F PMCC
Lower Limits:1.0
Upper Limits:15.7
Extinguishing Media:USE DRY CHEM OR CHEM FOAM SUITABLE FOR SLVNTS
Fire Fighting Procedures:COOL BELOW IGNITION TEMP W/CO*2 OR SMOTHER
W/CHEM FOAM
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID BRTHNG SLVNT VAPORS. EXTINGUISH ALL
SOURCES OF IGNITION. AVOID SKIN CNTCT. SOAK UP LIQ W/SAWDUST OR
RAGS. REMOVE. FLUSH W/WATER IF POSS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL, DRY AREA W/VENT
SUITABLE FOR STORING GIVEN SLVNTS.
Other Precautions:PROVIDE RESP PROT AGAINST SMOKE, FUMES GENERATED
DURING BURNING, DUSTS GENERATED DURING REMOVAL OF DRY COATING BY
ABRADING OPERATIONS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD RESP PROT IN ENCLOSED AREAS
Ventilation:MECH, ADEQUATE EXHST FROM BOTTOM
Protective Gloves:NOT NORM REQ
Eye Protection:FACE MASK,GOGS W/SDE SHLD
Other Protective Equipment:PROTECTIVE CREAMS & CLOTHING REC TO AVOID
SKIN CNTCT
Supplemental Safety and Health
VAP PRESS, VAP DNSTY, EVAP RATE ARE THAT OF XYLOL. % VOL >99%. SPEC
GRAVITY:0.89 + OR -0.02.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:275-318
Vapor Pres:11
Vapor Density:3.3
Evaporation Rate & Reference:0.68 N-BUTYL ACE
Appearance and Odor:CLEAR, WATER-WHITE LIQ, PUNGENT AROMATIC ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SPARKS & OPEN FLAME
Hazardous Decomposition Products:CO, CO*2, ALDEHYDES
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IAW LOCAL, STATE, FED REG
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ALPHA NO 411 THINNER
| 67-63-0
7732-18-5 |
|
AQUANEL 600, XV-551 INSULATING VARNISH
| 111-76-2 |
|
AQUANEL 700, XV-562 INSULATING VARNISH
| 111-76-2
7732-18-5 |
|
ISONEL 31-66, XV-503, INS VARNISH
| |
|
ISONEL 31-66, XV-493, INS VARNISH
| |
|
ISONEL 32R-66HF INS VARNISH (XV-492)
| 111-46-6 |
|
LACOLENE
| 8030-30-6 |
|
ISONEL 31-398
| 1330-20-7
64742-47-8 |
|
ISONEL 51-66HF INSULATING VARNISH
| 8030-30-6
100-41-4 |
|
ISONEL 51 BAKING INS VARNISH
| 1330-20-7
8030-30-6 |
|
1540 PAINT STRIPPER
| 75-09-2
64-18-6 |
|
ARALDITE 6005
| |
|
HYPREZ HYPRELUBE LUBRICANT
| |
|
HYPREZ W LUBRICANT
| |
|
HYPREZ OS LUBRICANT, 3426
| 64742-96-7
123-91-1
71-55-6 |
|
UNITED SHEET METAL DUCT SEALER
| 110-54-3
108-88-3 |
|
CEE-BEE A-215;PAINT & CARBON REMOVER
| 75-09-2
108-95-2 |
|
CEE-BEE B-55, OXIDATION & CORROSION REMOVER
| 7664-38-2
111-46-6
7664-39-3 |
|
CEE-BEE PR-38;DESEALANT
| 75-09-2
127-18-4 |
|
CEE-BEE PR-32; DESEALANT
| 75-09-2
79-14-1 |
|
BOSTIK 7074D ADHESIVE
| 141-78-6
108-88-3 |
|
BOSCODUR #5,CURING AGNT(PT B FOR 7074/7376)
| 78-93-3
101-68-8 |
|
PHENOLINE THINNER
| 1330-20-7
110-80-5
107-70-0 |
|
BUTYL EIGHT
| |
|
SOLVO-RUST, MFR PART #68D
| 1317-33-5
67-63-0 |
|
BLACK-OUT WHITE
| 108-88-3 |
|
T-GRADE MARKER INK, DYE TYPE, RED
| 1330-20-7 |
|
T-GRADE,MARKER INK,DYE TYPE,BLUE
| 1330-20-7 |
|
T-GRADE MARKER INK, DYE TYPE, ORANGE
| 1330-20-7 |
|
T-GRADE MARKER INK, DYE TYPE, BROWN
| 1330-20-7 |
|
T-GRADE MARKER INK, DYE TYPE, VIOLET
| 1330-20-7 |
|
T-GRADE MARKER INK,DYE TYPE,YELLOW
| 1330-20-7 |
|
CSI-50 WATER TREATMENT
| 7632-00-0 |
|
GUM ARABIC SOLUTION
| 7732-18-5
9000-01-5 |
|
VANAX NP
| |
|
WYNN'S 951-1 SYNTHETIC
| 102-71-6
111-42-2
107-41-5
112-80-1 |
|
CELOGEN AZ-130
| 123-77-3 |
|
SIMFLO ELECTROSTATIC FOUNTAIN SOLUTION
| 13746-66-2 |
|
N-1041 NEOPRENE ADHESIVE
| 126-99-8 |
|
MASTER KINCOTE THINNER
| |
|
KOOL KUT 91620
| |
|
ROYAL PLASTICIZER PN2
| |
|
PLASTIC ARMOR CLEAR-SWF
| 1330-20-7
108-93-0
123-42-2
71-36-3
110-80-5 |
|
RK Y 3712,(7 678)(326-L)CLEAR RESIN BLEND
| 108-88-3
1330-20-7 |
|
76 CURING SOLUTION, 76CS
| 110-80-5
7664-38-2 |
|
SUPER MUL
| |
|
SPREX AC 6
| |
|
SPIRIT
| 75-09-2
1319-77-3
64-18-6
108-88-3
107-19-7
67-63-0 |
|
RUST PREVENT 101, RP-101
| |
|
T-BUTYL PERBENZOATE
| 614-45-9 |
|
|