===================== Product Identification =====================
MSDS NAME:HYPREZ HYPRELUBE LUBRICANT
NIIN:00N000299
MSDS Number: BCFCM
=== Responsible Party ===
Company:ENGIS CORP. HYPREZ
Emergency Phone Num:312-966-5600
CAGE:GO828
=== Contractor Identification ===
Company:ENGIS CORP
Address:105 W HINTZ RD
Box:City:WHEELING
State:IL
ZIP:60090
Country:US
CAGE:20566
Company:ENGIS CORP. HYPREZ
CAGE:GO828
============= Composition/Information on Ingredients =============
Name:POLYALKYLENE GLYCOL
===================== Hazards Identification =====================
Effects of Overexposure:MOD NASAL/RESP IRRIT. SEVERE EYE IRRIT, REDNSS,
TEARNG/SPLASH. MOD IRRIT, NAUSEA, VOMIT FROM INGEST
======================= First Aid Measures =======================
First Aid:INH: MOVE TO FRESH AIR. GIVE O*2 IF BRTHNG DIFF. SKIN: WASH
THOROUGHLY W/SOAP & WATER AT LEAST 15 MIN, OCC LIFTING LIDS. CALL
MD. INGEST: GIVE 2 GLASSES WATER, INDUCE VOMIT W/FINGER DOWN
THROAT, CALL MD.
===================== Fire Fighting Measures =====================
Flash Point:148F TCC
Lower Limits:0.5
Upper Limits:1.8
Extinguishing Media:FOAM, DRY CHEM, CO*2, WATER
================== Accidental Release Measures ==================
Spill Release Procedures:CLEAN UP SPILLS W/WATER
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID CONTINUAL CNTCT OF HYPRELUBE
W/INDUSTRIAL COATINGS OR PAINT. SOME OF THESE WILL BE LIFTED BY
HYPRELUBE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD SELF-CNTND BRTHNG APPRTS IF
INADEQUATE VENT
Ventilation:LOCAL EXHST, IF SPRAYING. MECH, FOR NON-SPRAY APPLICATIONS
Protective Gloves:NONE REQ
Eye Protection:SAFETY GLASSES W/SIDE SH
Other Protective Equipment:EYEWASH FACILITY
Supplemental Safety and Health
VAPOR PRESSURE:<0.001; % VOLATILE BY VOL:NONE. LEL & UEL ARE ESTIMATES.
================== Physical/Chemical Properties ==================
Spec Gravity:0.99
Evaporation Rate & Reference:SLOWER THAN WATER
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, BLUE FLUID, PLEASANT ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IAW LOCAL, STATE, FED REG
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ALPHA NO 411 THINNER
| 67-63-0
7732-18-5 |
|
AQUANEL 600, XV-551 INSULATING VARNISH
| 111-76-2 |
|
AQUANEL 700, XV-562 INSULATING VARNISH
| 111-76-2
7732-18-5 |
|
ISONEL 31-66, XV-503, INS VARNISH
| |
|
ISONEL 31-66, XV-493, INS VARNISH
| |
|
ISONEL 32R-66HF INS VARNISH (XV-492)
| 111-46-6 |
|
LACOLENE
| 8030-30-6 |
|
ISONEL 31-398
| 1330-20-7
64742-47-8 |
|
ISONEL 51-66HF INSULATING VARNISH
| 8030-30-6
100-41-4 |
|
ISONEL 51 BAKING INS VARNISH
| 1330-20-7
8030-30-6 |
|
1540 PAINT STRIPPER
| 75-09-2
64-18-6 |
|
ARALDITE 6005
| |
|
HYPREZ HYPRELUBE LUBRICANT
| |
|
HYPREZ W LUBRICANT
| |
|
HYPREZ OS LUBRICANT, 3426
| 64742-96-7
123-91-1
71-55-6 |
|
UNITED SHEET METAL DUCT SEALER
| 110-54-3
108-88-3 |
|
CEE-BEE A-215;PAINT & CARBON REMOVER
| 75-09-2
108-95-2 |
|
CEE-BEE B-55, OXIDATION & CORROSION REMOVER
| 7664-38-2
111-46-6
7664-39-3 |
|
CEE-BEE PR-38;DESEALANT
| 75-09-2
127-18-4 |
|
CEE-BEE PR-32; DESEALANT
| 75-09-2
79-14-1 |
|
BOSTIK 7074D ADHESIVE
| 141-78-6
108-88-3 |
|
BOSCODUR #5,CURING AGNT(PT B FOR 7074/7376)
| 78-93-3
101-68-8 |
|
PHENOLINE THINNER
| 1330-20-7
110-80-5
107-70-0 |
|
BUTYL EIGHT
| |
|
SOLVO-RUST, MFR PART #68D
| 1317-33-5
67-63-0 |
|
BLACK-OUT WHITE
| 108-88-3 |
|
T-GRADE MARKER INK, DYE TYPE, RED
| 1330-20-7 |
|
T-GRADE,MARKER INK,DYE TYPE,BLUE
| 1330-20-7 |
|
T-GRADE MARKER INK, DYE TYPE, ORANGE
| 1330-20-7 |
|
T-GRADE MARKER INK, DYE TYPE, BROWN
| 1330-20-7 |
|
T-GRADE MARKER INK, DYE TYPE, VIOLET
| 1330-20-7 |
|
T-GRADE MARKER INK,DYE TYPE,YELLOW
| 1330-20-7 |
|
CSI-50 WATER TREATMENT
| 7632-00-0 |
|
GUM ARABIC SOLUTION
| 7732-18-5
9000-01-5 |
|
VANAX NP
| |
|
WYNN'S 951-1 SYNTHETIC
| 102-71-6
111-42-2
107-41-5
112-80-1 |
|
CELOGEN AZ-130
| 123-77-3 |
|
SIMFLO ELECTROSTATIC FOUNTAIN SOLUTION
| 13746-66-2 |
|
N-1041 NEOPRENE ADHESIVE
| 126-99-8 |
|
MASTER KINCOTE THINNER
| |
|
KOOL KUT 91620
| |
|
ROYAL PLASTICIZER PN2
| |
|
PLASTIC ARMOR CLEAR-SWF
| 1330-20-7
108-93-0
123-42-2
71-36-3
110-80-5 |
|
RK Y 3712,(7 678)(326-L)CLEAR RESIN BLEND
| 108-88-3
1330-20-7 |
|
76 CURING SOLUTION, 76CS
| 110-80-5
7664-38-2 |
|
SUPER MUL
| |
|
SPREX AC 6
| |
|
SPIRIT
| 75-09-2
1319-77-3
64-18-6
108-88-3
107-19-7
67-63-0 |
|
RUST PREVENT 101, RP-101
| |
|
T-BUTYL PERBENZOATE
| 614-45-9 |
|
|