===================== Product Identification =====================
MSDS NAME:ROYAL PLASTICIZER PN2
NIIN:00N000334
MSDS Number: BCFFF
=== Responsible Party ===
Company:WITCO CHEM CORP, GOLDEN BEAR DIV
Emergency Phone Num:805-399-9501
CAGE:GO838
=== Contractor Identification ===
Company:WITCO CHEM CORP, GOLDEN BEAR DIV
CAGE:GO838
Company:WITCO CORP GOLDEN BEAR DIVISION
Address:10100 SANTA MONICA BLVD SUITE 1470
City:LOS ANGELES
State:CA
ZIP:90067
Country:US
Phone:805-393-7110
CAGE:07750
============= Composition/Information on Ingredients =============
Name:PETROLEUM HYDROCARBON
===================== Hazards Identification =====================
Effects of Overexposure:DERMATITIS POSS IN SENSITIVE INDIVIDUALS AFTER
EXTENDED EXPOSURE. AVOID SKIN/EYE CNTCT.
======================= First Aid Measures =======================
First Aid:SKIN: WASH THOROUGHLY W/SOAP & WATER. EYE: IMMED FLUSH
W/WATER AT LEAST 15 MIN. CALL MD. INGEST: ADMIN VEGETABLE OIL.
INDUCE VOMIT, TAKE CARE AGAINST ASPIRATION, CALL MD.
===================== Fire Fighting Measures =====================
Flash Point:330F COC
Extinguishing Media:FOAM, WATER FOG, DRY CHEM
Fire Fighting Procedures:STANDARD PETROLEUM PROCEDURES
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE FROM WATER BY SKIMMING. WASH W/SOAP OR
DETERGENT & WATER. REMOVE W/ABSORBENT MATL SUCH AS SAND, CLAY, ETC.
====================== Handling and Storage ======================
Handling and Storage Precautions:MFR STATES PETROLEUM OILS RELATIVELY
NON VOLATILE PRODS & DO NOT PRESENT VAP HAZ AT ROOM TEMP OF 70F.
Other Precautions:KEEP CLEAN, DRY
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQ
Ventilation:LOCAL EXHST, IF VAPORS GENRTD,THERMAL PROC,OR IF MIST
FORMED
Protective Gloves:OIL RESIST
Eye Protection:SAFETY GLASSES USEFUL
Other Protective Equipment:BARRIER CREAMS CAN BE USED FOR SENSITIVE
INDIVIDUALS
Supplemental Safety and Health
VAP PRESS, VAP DNSTY, % VOLATILE BY VOL, EVAP RATE @ 70F ARE NIL, MFR.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:550+F INIT
Spec Gravity:0.93
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OILY LIQ, NOT OBJECTIONABLE ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID EXPOSING MISTS OR SPRAYS TO HIGH
TEMPS OR OPEN FLAME
Hazardous Decomposition Products:NONE
==================== Disposal Considerations ====================
Waste Disposal Methods:ABSORPTION OR CONTROLLED BURNING IAW LOCAL,
STATE, FED REG
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ALPHA NO 411 THINNER
| 67-63-0
7732-18-5 |
|
AQUANEL 600, XV-551 INSULATING VARNISH
| 111-76-2 |
|
AQUANEL 700, XV-562 INSULATING VARNISH
| 111-76-2
7732-18-5 |
|
ISONEL 31-66, XV-503, INS VARNISH
| |
|
ISONEL 31-66, XV-493, INS VARNISH
| |
|
ISONEL 32R-66HF INS VARNISH (XV-492)
| 111-46-6 |
|
LACOLENE
| 8030-30-6 |
|
ISONEL 31-398
| 1330-20-7
64742-47-8 |
|
ISONEL 51-66HF INSULATING VARNISH
| 8030-30-6
100-41-4 |
|
ISONEL 51 BAKING INS VARNISH
| 1330-20-7
8030-30-6 |
|
1540 PAINT STRIPPER
| 75-09-2
64-18-6 |
|
ARALDITE 6005
| |
|
HYPREZ HYPRELUBE LUBRICANT
| |
|
HYPREZ W LUBRICANT
| |
|
HYPREZ OS LUBRICANT, 3426
| 64742-96-7
123-91-1
71-55-6 |
|
UNITED SHEET METAL DUCT SEALER
| 110-54-3
108-88-3 |
|
CEE-BEE A-215;PAINT & CARBON REMOVER
| 75-09-2
108-95-2 |
|
CEE-BEE B-55, OXIDATION & CORROSION REMOVER
| 7664-38-2
111-46-6
7664-39-3 |
|
CEE-BEE PR-38;DESEALANT
| 75-09-2
127-18-4 |
|
CEE-BEE PR-32; DESEALANT
| 75-09-2
79-14-1 |
|
BOSTIK 7074D ADHESIVE
| 141-78-6
108-88-3 |
|
BOSCODUR #5,CURING AGNT(PT B FOR 7074/7376)
| 78-93-3
101-68-8 |
|
PHENOLINE THINNER
| 1330-20-7
110-80-5
107-70-0 |
|
BUTYL EIGHT
| |
|
SOLVO-RUST, MFR PART #68D
| 1317-33-5
67-63-0 |
|
BLACK-OUT WHITE
| 108-88-3 |
|
T-GRADE MARKER INK, DYE TYPE, RED
| 1330-20-7 |
|
T-GRADE,MARKER INK,DYE TYPE,BLUE
| 1330-20-7 |
|
T-GRADE MARKER INK, DYE TYPE, ORANGE
| 1330-20-7 |
|
T-GRADE MARKER INK, DYE TYPE, BROWN
| 1330-20-7 |
|
T-GRADE MARKER INK, DYE TYPE, VIOLET
| 1330-20-7 |
|
T-GRADE MARKER INK,DYE TYPE,YELLOW
| 1330-20-7 |
|
CSI-50 WATER TREATMENT
| 7632-00-0 |
|
GUM ARABIC SOLUTION
| 7732-18-5
9000-01-5 |
|
VANAX NP
| |
|
WYNN'S 951-1 SYNTHETIC
| 102-71-6
111-42-2
107-41-5
112-80-1 |
|
CELOGEN AZ-130
| 123-77-3 |
|
SIMFLO ELECTROSTATIC FOUNTAIN SOLUTION
| 13746-66-2 |
|
N-1041 NEOPRENE ADHESIVE
| 126-99-8 |
|
MASTER KINCOTE THINNER
| |
|
KOOL KUT 91620
| |
|
ROYAL PLASTICIZER PN2
| |
|
PLASTIC ARMOR CLEAR-SWF
| 1330-20-7
108-93-0
123-42-2
71-36-3
110-80-5 |
|
RK Y 3712,(7 678)(326-L)CLEAR RESIN BLEND
| 108-88-3
1330-20-7 |
|
76 CURING SOLUTION, 76CS
| 110-80-5
7664-38-2 |
|
SUPER MUL
| |
|
SPREX AC 6
| |
|
SPIRIT
| 75-09-2
1319-77-3
64-18-6
108-88-3
107-19-7
67-63-0 |
|
RUST PREVENT 101, RP-101
| |
|
T-BUTYL PERBENZOATE
| 614-45-9 |
|
|