===================== Product Identification =====================
MSDS NAME:1100 BARE WIRE
NIIN:00-245-5029
MSDS Number: BMTWX
=== Responsible Party ===
Company:NATIONAL WELDING ALLOYS, INC.
Address:1600 SOUTH CANAL STREET
City:PITTSBURGH
State:PA
ZIP:15215
Country:US
Info Phone Num:412-781-4255
Emergency Phone Num:412-781-4255
CAGE:0ACE2
=== Contractor Identification ===
Company:NATIONAL TORCH TIP CO INC.
Address:50 FREEPORT RD
City:PITTSBURGH
State:PA
ZIP:15215-2906
Country:US
Phone:412-781-4200
CAGE:93009
Company:NATIONAL WELDING ALLOYS INC
Address:1600 SOUTH CANAL STREET
Box:City:PITTSBURGH
State:PA
ZIP:15215-2624
Country:US
Phone:412-781-4255
CAGE:0ACE2
============= Composition/Information on Ingredients =============
Name:IRON OXIDE
CAS:1309-37-1
RTECS #:NO7400000
Fraction by Wt: SEE O2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5 MG/M3(FE),B2; 9293
Name:SILICA, CRYSTALLINE - FUSED
CAS:60676-86-0
RTECS #:VV7328000
Other REC Limits:NONE SPECIFIED
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293
Name:COPPER (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: .05-0.2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 0.05%
Other REC Limits:NONE SPECIFIED
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293
Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: 0.1%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15MG/M3 TDUST/5 FUME
ACGIH TLV:10MG/M3 TDUST; 9293
Name:ALUMINUM (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: TO 100%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL RAT LD50 IS NOT KNOWN
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WELDING GENERATES FUMES,GASES,AND
ELECTROMAGNETIC RADIATION WITH KNOWN HEALTH EFFECTS. THE
COMPOSITION OF WELDING EMISSIONS VARIES SUBSSTANTIALLY WITH THE
WELDING PROCESS. RESULTS ARE WWELDING FUME FE VER, SUNBURN FROM
ELECTROMAGNETIC RADIATION.
Explanation of Carcinogenicity:PRODUCT IS NOT LISTED AS A CARCINOGEN BY
IARC, NTP, OR OSHA.
Effects of Overexposure:EYE:BURNS RESULTING IN POSSIBLE BLINDNESS IF
PROPER EYEWARE IS NOT WORN. SKIN:'SUNBURN' FROM UV RADIATION.
INHALED: RESPIRATORY IRRITATION, DIZZINESS, NAUSEA, DRYNESS OF
THROAT, FLU-LIKE SYMPTOMS. IN GESTED: HIGHLY UNLIKELY EXPOSURE.
Medical Cond Aggravated by Exposure:IMPAIRED PULMONARY FUNCTION MAY BE
EXACERBATYED.
======================= First Aid Measures =======================
First Aid:EYE:(BURN) GET MEDICAL ATTENTION SKIN:WASH WITH SOAP &
WATER. INHALED:REMOVE TO FRESH AIR. RESTORE BREATHING IF
NECESSARY. INGESTED:UNLIKELY EXPOSURE. IF IRRITATION PERSISTS OR
IS SEVERE,SEE A DO CTOR.
===================== Fire Fighting Measures =====================
Flash Point:NON-FLAMMABLE
Extinguishing Media:THIS ALLOY IS NONCOMBUSTABLE. EXTINGUISH FIRE WITH
MEDIA APPROPRIATE FOR SOURCE OF FIRE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. IF REDUCED TO
POWDER, USE CAUTION TO PREVENT FIRE OR EXPLOSION.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:MFR SAID "NOT APPLICIABLE" IN THIS FIELD.
Neutralizing Agent:MFR SAID "NOT APPLICIABLE" IN THIS FIELD.
====================== Handling and Storage ======================
Handling and Storage Precautions:NO INFORMATION GIVEN ON MSDS BY
SUPPLIER.
Other Precautions:FOR OTHER PRECAUTIONS AND ADDITIONAL SAFETY
INFORMATION SEE AMERICAN STANDARD Z49.1-1980; 'SAFETY IN WELDING
AND CUTTING' AND/OR SAFETY IN WELDING FROM THE AMERICAN WELDING
SOCIETY.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR
OR RESPIRATOR FOR RESPIRABLE DUST IF EXPOSURE IS ABOVE THE TLV/PEL
OR IF WELDING IN AN ENCLOSED AREA.
Ventilation:NORMAL ROOM VENTILATION MAY BE SUFFICIENT. SUPPLEMENT WITH
LOCAL EXHAUST NEAR THE ARC IF PEL/TLV IS EXCEEDED.
Protective Gloves:WELDERS GLOVES
Eye Protection:FACE SHIELD WITH ANSI FILTER
Other Protective Equipment:WORK CLOTHING AND GLOVES AS NEEDED TO
PREVENT RADIATION OR THERMAL BURNS.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE. WASH
AFTER USING THE PRODUCT AND BEFORE EATING, DRINKING, ETC.
Supplemental Safety and Health
NONE
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:SOLID
Solubility in Water:NEGLIGIBLE
Appearance and Odor:0.062 X 36 INCH ROD, GREY TO SILVER IN COLOR
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, MINERAL ACIDS
Stability Condition to Avoid:NO INFORMATION GIVEN ON MSDS BY SUPPLIER
Hazardous Decomposition Products:VARIOUS METAL OXIDES AND
ELEMENTALMETALS MAY BE GENERATED FROM MELTING OR DROSS HANDLING
OPERATIONS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS. PLACE IN CONTAINER ANDDISPOSE IN AN ENVIRONMENTALLY
ACCEPTRABLE MANNER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|