Search   
MSDS  : E-1003; PLATING RACK COATING MICROSOL
CAS  : 7727-43-7
NAME  : polyvinyl chloride homopolymer
barium sulfate
===================== Product Identification =====================

MSDS NAME:E-1003; PLATING RACK COATING MICROSOL
NIIN:00N000533
MSDS Number: BCFRM
=== Responsible Party ===
Company:MICHIGAN CHROME & CHEMICAL CO.
Emergency Phone Num:(313)921-3711
CAGE:01058
=== Contractor Identification ===
Company:MICHIGAN CHROME AND CHEMICAL CO
Address:8615 GRINNELL AVE
Box:City:DETROIT
State:MI
ZIP:48213-1152
Country:US
CAGE:01058

============= Composition/Information on Ingredients =============

Name:POLYVINYL CHLORIDE HOMOPOLYMER
RTECS #:KV0350000
Fraction by Wt: 56.0%

Name:BARIUM SULFATE
CAS:7727-43-7
RTECS #:CR0600000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

===================== Hazards Identification =====================

Effects of Overexposure:NOT KNOWN, MFR

======================= First Aid Measures =======================

First Aid:FLUSH SKIN/EYES W/WATER

===================== Fire Fighting Measures =====================

Flash Point:>300F CC
Extinguishing Media:CO*2, DRY CHEM, ORDINARY FOAM FOR LG FIRES
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

================== Accidental Release Measures ==================

Spill Release Procedures:SWEEP UP, WIPE UP, SCRAPE UP

====================== Handling and Storage ======================

Handling and Storage Precautions:AVOID EXPOSURE TO DIRECT SUNLIGHT OR
HEAT. MATERIAL CAN THICKEN ON LONG EXPOSURE TO TEMP, ABOVE 110F.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:NOT NEC USUALLY.IF NEC, USE NIOSH/MSHA APPRVD
RESP DEVICE
Ventilation:PROVIDE EXHAUST IN OVEN-BAKING AREA
Protective Gloves:FOR HOT PARTS
Eye Protection:SAFETY SPECTACLES
Supplemental Safety and Health
SPECIFIC GRAVITY:1.25. ADDITIONAL INGREDIENTS:EPOXY RESIN, 1.0%

================== Physical/Chemical Properties ==================

Appearance and Odor:BLACK LIQ, VERY LITTLE ODOR

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTAM W/WATER
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:CO, CO*2, HCL

==================== Disposal Considerations ====================

Waste Disposal Methods:USE APPRVD LANDFILL IF IAW FED, STATE, LOCAL REG

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
SILASTIC J RTV SILICONE RUBBER,BASE
SILASTIC J RTV SILICONE RUBBER,CATALYST
ANTIFOAM AF EMULSION
TYPE N TONER
INTERLUX FIBERGLASS SOLVENT 202 (NEW FORM.) 123-86-4
108-94-1
INTERFLUX FIBERGLASS SOLVENT 8030-30-6
123-86-4
78-59-1
RUST JELLY 7664-38-2
AZROCK,CLEAR BRUSH-ON;56-012 1330-20-7
EPIBOND 1526, PART A 1317-65-3
7631-86-9
EPIBOND 1526,PART B 141-43-5
111-40-0
112945-52-5
1317-65-3
E-312, PART B HARDENER (DEH24)
SILASTIC NPC-40 SILICONE RUBBER 7631-86-9
68083-18-1
68083-19-2
70131-67-8
69430-24-6
SILASTIC NPC-80 SILICONE RUBBER 68037-69-4
7631-86-9
14808-60-7
68083-18-1
70131-67-8
E-446,DISCCEMENT,BRICK RED 7664-41-7
7732-18-5
HE-2 OPTICAL CEMENT 97-88-1
94-36-0
CONTAX II; 91591 354-58-5
FASTCURE POWDER 94-36-0
FASTCURE LIQUID 80-62-6
E-1003; PLATING RACK COATING MICROSOL 7727-43-7
UNICHROME 313 STOPOFF CMPD 8002-74-2
ALCLO POWDER 7429-90-5
7778-74-7
AVAROX DBPH 786-37-4
VAROX DBPH-50, P7 1004 786-37-4
471-34-1
300 RED INSULATING ENAMEL 1330-20-7
289 GREASE
696 SISI SEALER
MIRA-JET 2 PROD ID NO:024 SERIES
M-COAT GL RESIN (PART A) 13463-67-7
M-COAT GL CURING AGENT, PART B 1308-38-9
OMP-2 ORGANOTIN POLYMER 108-94-1
CORLAR EPOXY ENAMEL, 823-Y 7439-92-1
108-88-3
7440-39-3
CHEMGLZE II A 971 YELLOW 7758-97-6
1330-20-7
FERRIC CHLORIDE 42 7705-08-0
7732-18-5
VINYLTEX GOLDEN YELLOW ANTIFOULING PAINT 56-35-9
1330-20-7
108-10-1
1330-78-5
7758-97-6
TURCOAT 3797 7664-38-2
3333-67-3
LP-32 LIQUID POLYSULFIDE POLYMER
186 5682,KODASTAR MACHINE ACTIVATOR 1310-58-3
7732-18-5
4853 ADDITIVE, MULTI-PURPOSE
LUBRIZOL 3123
431,RESIN BASE ADHESIVE 8030-30-6
67-56-1
N-HEXANE, HIGH PURITY 110-54-3
LOOSEN-ALL PENETRATING OIL
ANTI-FOULANT ADDITIVE 56-35-9
2246 ANTIOXIDANT
ENTHOX AL 990,(CL 1A, METHOD C) 7738-94-5
7697-37-2
EBONOL SS-52 1310-73-2
ALOXIDE (CONVERSION COATING FOR ENGRVD AL) 7783-00-8
7664-38-2
16872-11-0
67-56-1
ALOXIDE,170401 7783-00-8
7758-99-8
7664-38-2
16872-11-0
7786-81-4
7732-18-5
155 8931,METAL ETCH RESIST THINNER 1330-20-7
742,720,TT-E-489,COMP L, WHITE#17778 8030-30-6
78-83-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net