===================== Product Identification =====================
MSDS NAME:742,720,TT-E-489,COMP L, WHITE#17778
NIIN:00N000570
MSDS Number: BCFTH
=== Responsible Party ===
Company:PRATT AND LAMBERT (FORMERLY ENMAR, AN AMERON CO)
Emergency Phone Num:(316) 733-1361
CAGE:61196
=== Contractor Identification ===
Company:PRATT & LAMBERT
Address:76 TONAWANDA ST
Box:City:BUFFALO
State:NY
ZIP:14207
Country:US
Phone:800-647-2263
CAGE:77395
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196
============= Composition/Information on Ingredients =============
Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
OSHA PEL:100 PPM
Name:ISOBUTYL ALCOHOL (SARA III)
CAS:78-83-1
RTECS #:NP9625000
Fraction by Wt: <0.5%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:ANESTH,IRRIT OF RESP TRACT/ACUTE CNS
DEPR-HDACHE,DIZZ,STAG,CNFUSN,UNCONSC,COMA.SKIN&EYE:PRIM.IRRIT.
======================= First Aid Measures =======================
First Aid:IN CASE OF CONTACT,FLUSH SKIN & EYES W/PLENTY OF WATER WHILE
REMOVEING CONTAMINATED CLOTHING.IF INHALED,REMOVE TO FRESH AIR.CALL
A PHYSICIAN IF SYMPTOMS PERSIST
===================== Fire Fighting Measures =====================
Flash Point:104F TCC
Lower Limits:1.10
Extinguishing Media:CO*2,DRY CHEM,ALC FOAM.LGE FIRE:POLYMER FOAM
PREFERRED
Fire Fighting Procedures:SELF-CONTND BREATHING APPARTS.IF H2O USED,FOG
NOZZ PREF.
Unusual Fire/Explosion Hazard:CLOSD CNTNRS MAY EXPLODE WHEN EXPSD TO
EXTRME HEAT.COOL CNTNRS W/H2O.DO NOT APPLY TO VERY HOT SURFS.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION(FLAMES,HOT
SURFACES,STATIC OR FRICTIONAL SPARKS).AVOID BREATHING
VAPORS.VENTILATE AREA.REMOVE W/ INERT ABSORBENT AND NON-SPARKING
TOOLS
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LGE QTS
IN BLDG DESIGNED TO COMPLY W/OSHA 1910.106.GROUND CNTNRS WHEN
POURING.AVOID FREE FALL OF LIQ> FEW INCHES
Other Precautions:DO NOT FLAME CUT,BRAZE OR WELD COATED MTRL W/O PROPER
RESPIRATOR OR VENTILATION.ADD LABEL WARNING.COMBUSTIBLE LIQUID
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD RESP PROTECTN FOR PARTICLR
EXPOSURE OF CONCERN.
Ventilation:GENRL DILUTN/LOCAL EXHST ADEQUATE TO KEEP BELOW TLV & LEL.
Protective Gloves:YES
Eye Protection:YES,FOR SPLASH
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT W/
CONTAMINATED CLOTHING
Supplemental Safety and Health
MFR ADDRESS:630 E.13TH, ANDOVER, KS 67002. VAPOR PRESSURE OF ISOBUTYL
ALCOHOL@8.80 MMHG, MINERAL SPIRITS=3.20.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:311 TO 373F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:59
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRES,HEAT AND HOT SURFACES
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL,STATE,AND FEDERAL
REGULATIONS.INCINERATE IN APPROVED FACILITY.DO NOT INCINERATE
CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SILASTIC J RTV SILICONE RUBBER,BASE
| |
|
SILASTIC J RTV SILICONE RUBBER,CATALYST
| |
|
ANTIFOAM AF EMULSION
| |
|
TYPE N TONER
| |
|
INTERLUX FIBERGLASS SOLVENT 202 (NEW FORM.)
| 123-86-4
108-94-1 |
|
INTERFLUX FIBERGLASS SOLVENT
| 8030-30-6
123-86-4
78-59-1 |
|
RUST JELLY
| 7664-38-2 |
|
AZROCK,CLEAR BRUSH-ON;56-012
| 1330-20-7 |
|
EPIBOND 1526, PART A
| 1317-65-3
7631-86-9 |
|
EPIBOND 1526,PART B
| 141-43-5
111-40-0
112945-52-5
1317-65-3 |
|
E-312, PART B HARDENER (DEH24)
| |
|
SILASTIC NPC-40 SILICONE RUBBER
| 7631-86-9
68083-18-1
68083-19-2
70131-67-8
69430-24-6 |
|
SILASTIC NPC-80 SILICONE RUBBER
| 68037-69-4
7631-86-9
14808-60-7
68083-18-1
70131-67-8 |
|
E-446,DISCCEMENT,BRICK RED
| 7664-41-7
7732-18-5 |
|
HE-2 OPTICAL CEMENT
| 97-88-1
94-36-0 |
|
CONTAX II; 91591
| 354-58-5 |
|
FASTCURE POWDER
| 94-36-0 |
|
FASTCURE LIQUID
| 80-62-6 |
|
E-1003; PLATING RACK COATING MICROSOL
| 7727-43-7 |
|
UNICHROME 313 STOPOFF CMPD
| 8002-74-2 |
|
ALCLO POWDER
| 7429-90-5
7778-74-7 |
|
AVAROX DBPH
| 786-37-4 |
|
VAROX DBPH-50, P7 1004
| 786-37-4
471-34-1 |
|
300 RED INSULATING ENAMEL
| 1330-20-7 |
|
289 GREASE
| |
|
696 SISI SEALER
| |
|
MIRA-JET 2 PROD ID NO:024 SERIES
| |
|
M-COAT GL RESIN (PART A)
| 13463-67-7 |
|
M-COAT GL CURING AGENT, PART B
| 1308-38-9 |
|
OMP-2 ORGANOTIN POLYMER
| 108-94-1 |
|
CORLAR EPOXY ENAMEL, 823-Y
| 7439-92-1
108-88-3
7440-39-3 |
|
CHEMGLZE II A 971 YELLOW
| 7758-97-6
1330-20-7 |
|
FERRIC CHLORIDE 42
| 7705-08-0
7732-18-5 |
|
VINYLTEX GOLDEN YELLOW ANTIFOULING PAINT
| 56-35-9
1330-20-7
108-10-1
1330-78-5
7758-97-6 |
|
TURCOAT 3797
| 7664-38-2
3333-67-3 |
|
LP-32 LIQUID POLYSULFIDE POLYMER
| |
|
186 5682,KODASTAR MACHINE ACTIVATOR
| 1310-58-3
7732-18-5 |
|
4853 ADDITIVE, MULTI-PURPOSE
| |
|
LUBRIZOL 3123
| |
|
431,RESIN BASE ADHESIVE
| 8030-30-6
67-56-1 |
|
N-HEXANE, HIGH PURITY
| 110-54-3 |
|
LOOSEN-ALL PENETRATING OIL
| |
|
ANTI-FOULANT ADDITIVE
| 56-35-9 |
|
2246 ANTIOXIDANT
| |
|
ENTHOX AL 990,(CL 1A, METHOD C)
| 7738-94-5
7697-37-2 |
|
EBONOL SS-52
| 1310-73-2 |
|
ALOXIDE (CONVERSION COATING FOR ENGRVD AL)
| 7783-00-8
7664-38-2
16872-11-0
67-56-1 |
|
ALOXIDE,170401
| 7783-00-8
7758-99-8
7664-38-2
16872-11-0
7786-81-4
7732-18-5 |
|
155 8931,METAL ETCH RESIST THINNER
| 1330-20-7 |
|
742,720,TT-E-489,COMP L, WHITE#17778
| 8030-30-6
78-83-1 |
|
|