===================== Product Identification =====================
MSDS NAME:STEPANFOAM BH-610-R
NIIN:00N000646
MSDS Number: BCFYK
=== Responsible Party ===
Company:STEPAN CHEMICAL COMPANY
Emergency Phone Num:(312) 446-7500
CAGE:GO910
=== Contractor Identification ===
Company:STEPAN CHEMICAL COMPANY
CAGE:GO910
Company:STEPAN COMPANY
Address:EDENS EXPY WINNETKA RD
Box:City:WINNETKA
State:IL
ZIP:60093
Country:US
Phone:800-228-5635, CHEMTREC 800-424-9300
CAGE:87570
============= Composition/Information on Ingredients =============
Name:WATER BLOWN POLYESTER POLYOL RESIN
Fraction by Wt: 100%
===================== Hazards Identification =====================
Effects of Overexposure:EYE CONTACT-PAIN,IRRITATN.REPEATED/PROLONGED
SKIN CONTACT-IRRITATN. INITIAL VAPORS-WATER VAPOR.
======================= First Aid Measures =======================
Eyes:IMMEDIATELY FLUSH W/WATER AT LEAST 15 MINUTES. CALL MD.
SKIN:WASH THOROUGHLY W/MILD SOAP AND WATER. IF MIST OR VAPOR FROM
HOT OR BURNING MATERIAL IS IRRITATING, REMOVE TO FRESH AIR. IF ANY
SYMPTO MS PERSIST, CALL MD.
===================== Fire Fighting Measures =====================
Flash Point:>230F(110C) CC
Extinguishing Media:CO*2, DRY CHEM, FOAM, SAND. USE WATER W/CAUTION!
Fire Fighting Procedures:WATER MAY BE USED TO COOL CONTAINERS.
Unusual Fire/Explosion Hazard:WATER MAY SPREAD BURNING LIQUID. PRESSURE
MAY DEVELOP IN CONTAINERS IF HEATED OVER 230 F (110 C).
================== Accidental Release Measures ==================
Spill Release Procedures:WASH AWAY W/WARM WATER OR SOAK UP W/SAND OR
INERT MATERIAL AND SHOVEL INTO WASTE CONTAINERS. THIS APPLIES ONLY
TO PART B (BH-610-R). SEE PART A DATA.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID FIRES OR OPEN FLAME. DO NOT TAKE
INTERNALLY.
Other Precautions:DOES NOT FUME AT NORMAL (ROOM) TEMPERATURES
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD RESP PROTECTN FOR PARTICULAR
EXPOSURE OF CONCERN.
Ventilation:PROVIDE ADEQUATE VENTILATION.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:GOGGLES OR FACE MASK.
Other Protective Equipment:APRONS OR COVERALLS IF SPLASHING IS LIKELY.
Supplemental Safety and Health
PART B OF A 2 PART PRODUCT.PART A IS STEPANFOAM BH-610-T (SAME NSN P/N
IND:A) VAPOR PRESSURE:<17 MMHG @ 70F.% VOLATILE VY WT:ABOUT 17.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>230F(110C)
Vapor Density:<1.
Evaporation Rate & Reference:SLOWER THAN ETHER
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:BURNING MAY CAUSE FORMATION OF CO,
CO*2 OR SMOKE.
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR SUGGESTS BURY, INCINERATE, OR FLUSH TO SEWER
W/HOT WATER IN ACCORDANCE W/LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|