===================== Product Identification =====================
MSDS NAME:GR-660
NIIN:00N000676
MSDS Number: BCFZW
=== Responsible Party ===
Company:HOOKER CHEMICALS & PLASTICS CORP.
Emergency Phone Num:(716) 278-7777
CAGE:73675
=== Contractor Identification ===
Company:HOOKER CHEMICALS & PLASTICS CORP.,DUREZ DIVISION
Box:728
CAGE:73675
Company:OCCIDENTAL CHEMICAL CORP (OXYCHEM)SHORT ABBREVIAT
Address:360 RAINBOW BLDVD SOUTH
Box:728
City:NIAGARA FALLS
State:NY
ZIP:14302
Country:US
Phone:1-800-733-3665
CAGE:91784
============= Composition/Information on Ingredients =============
Name:POLYMERS OF TRIFLUORO CHLORO ETHYLENE
===================== Hazards Identification =====================
Effects of Overexposure:MAY CAUSE SOME IRRIT OF EYES.IF CONTAM
W/FOREIGN SUBSTANCES MAY IRRIT EYES & SKIN ETC.
======================= First Aid Measures =======================
Eyes:FLUSH W/ WATER.GET MEDICAL ATTN.SKIN:WASH W/SOAP &
WATER.INGEST:DRINK LG AMT OF WATER;IF VOMITING OCCURS,ADMIN MORE
WATER.ADMIN SALINE LAXATIVE;OTHERWISE,TREATMENT IS SYMPTOMATIC
===================== Fire Fighting Measures =====================
Flash Point:NONE
Fire Fighting Procedures:AS APPROPRIATE FOR SURROUNDING FIRE
================== Accidental Release Measures ==================
Spill Release Procedures:SCRAPE UP EXCESS.APPLY SUCCESSIVE PORTIONS OF
ABSORBENT MEDIUM(DIATOMACEOUS EARTH,CLAY ETC.)TO CLEAN UP LAST
TRACES.
====================== Handling and Storage ======================
Other Precautions:INCOMPATIBILITY ALSO W/LIQUID FLUORINE,LIQUID
CHLORINE TRIFLUORIDE.AMINES OR AMINE ADDITIVES
============= Exposure Controls/Personal Protection =============
Ventilation:GENERAL
Protective Gloves:RUBBER/NEOPRENE
Eye Protection:CHEM SAFETY SPECTACLES
Supplemental Safety and Health
SPECIFIC GRAVITY:1.85-1.95.VAPOR PRESSURE: <0.00001 AT 100F.NEW
ADDRESS:345 THIRD ST. P.O.BOX 728 NIAGARA FALLS NY 14302.MOLECULAR
WT VARIES BETWEEN 600-1200
================== Physical/Chemical Properties ==================
HCC:V6
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TRANSLUCENT TO OPAQUE,COLORLESS,ODORLESS,GREASES.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NA OR K METALS,AL OR MG UNDER PRESS(SEE OTHER PRECAUTIONS)
Stability Condition to Avoid:AVOID TEMP ABOVE 500F
Conditions to Avoid Polymerization:AVOID TEMP ABOVE
500F,DEPOLYMERIZATION STARTS SLOWLY @ 575F
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR RECM:INCINERATE IN EQUIP DESIGNED TO HANDLE
HYDROGEN CHLORIDE & FLUORIDES AS COMBUSTION PRODUCTS;OR CONSULT
POLLUTION CONTROL AUTHORITIES REGARDING BURIAL.DISPOSE IAW
FED,STATE & LOCAL CODES
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|