===================== Product Identification =====================
MSDS NAME:CLAG PLASTI-BOND
NIIN:00F023729
MSDS Number: BNJJH
=== Responsible Party ===
Company:INTERNATIONAL ADHESIVES/RESINS PTY LTD
Address:TULLAMARINE PARK ROAD
City:TULLAMARINE
Info Phone Num:(03) 435-5851
Emergency Phone Num:(03) 435-5851
CAGE:GO096
=== Contractor Identification ===
Company:INTERNATIONAL ADHESIVES/RESINS PTY LTD
Address:TULLAMARINE PARK ROAD
City:TULLAMARINE
Phone:(03) 435-5851
CAGE:GO096
============= Composition/Information on Ingredients =============
Name:STYRENE, (MONOMER), SUSPECTED ANIMAL CARCINOGEN BY IARC &
ACGIH
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 22%
Other REC Limits:50 PPM
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY TRACT
IRRITATION, ANESTHETIC OR FATAL.
Explanation of Carcinogenicity:STYRENE MONOMER IS A SUSPECTED ANIMAL
CARCINOGEN BY ACGIH.
Effects of Overexposure:INHALATION: RESPIRATORY TRACT IRRITATION,
ANESTHETIC OR FATAL.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER. SKIN:
REMOVE W/MINERAL TURPS, WASH W/SOAP & WATER. INGESTION: DON'T
INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:90F
Extinguishing Media:CO2, ALCOHOL FOAM, DRY CHEMICAL
Fire Fighting Procedures:FIGHT FIRE LIKE A FUEL OIL FIRE
Unusual Fire/Explosion Hazard:IF POLYMERIZATION OCCURS DUE TO ELEVATED
TEMPERATURES IN A CLOSED CONTAINER, THERE IS A POSSIBILTY OF
VIOLENT RUPTURE.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. SCRAPE UP & PLACE IN CLOSED CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE W/ALL PRECAUTIONS NECESSARY FRO
HANDLING A FLAMMABLE LIQUID. MAINTAIN TEMPERATURE BETWEEN 41-86F.
Other Precautions:AVOID CONTACT W/SKIN, EYES & BREATHING VAPOR.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IN WELL VENTILATED AREA NONE IS REQUIRED. >50
PPM STYRENE MONOMER, USE AN APPROVED SELF-CONTAINED BREATHING
APPARATUS.
Protective Gloves:NEOPRENE
Eye Protection:RECOMMENDED
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text: 293F
Vapor Pres:<5
Vapor Density:3.6
Spec Gravity:1.72
Evaporation Rate & Reference:(BU AC =1): <1
Solubility in Water:INSOLUBLE
Appearance and Odor:VISCOUS LIQUID W/STYRENE ODOR.
Percent Volatiles by Volume: 42%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS & ORGANIC PEROXIDES
Stability Condition to Avoid:HEAT, FLAME, ELEVATED TEMPERATURES OR
OTHER SOUCES OF IGNITION.
Hazardous Decomposition Products:CO, CO2 & OTHER UNKNOWN GASES
Conditions to Avoid Polymerization:IMPROPER ADDITIONS OF PROMOTOR &/OR
CATALYST, TEMPERATURES >100F & SUNLIGHT.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|