===================== Product Identification =====================
MSDS NAME:ENGINE DEGREASER
NIIN:00F023740
MSDS Number: BNJJS
=== Responsible Party ===
Company:ENSIGN LABORATORIES PTY LTD
Address:WELLINGTON RD
City:MULGRAVE
State:VI
Country:AU
CAGE:Z1812
=== Contractor Identification ===
Company:ENSIGN LABORATORIES PTY LTD
Address:WELLINGTON RD
Box:City:MULGRAVE
State:VI
Country:AU
CAGE:Z1812
Company:REPCO LOCTITE PTY LTD
CAGE:Z3616
============= Composition/Information on Ingredients =============
Name:METHYL CHLOROFORM (1,1,1-TRICHLOROETHANE) (CHLOROTHENE NU),
AEROTHANE TT, CHLOROTHENE
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 81%
Other REC Limits:450 PPM STEL
OSHA PEL:350 PPM
ACGIH TLV:1910 MG/CUM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1
Name:SURFACTANT (TYPE NOT SPECIFIED)
Name:LANOLIN
CAS:8006-54-0
RTECS #:OE3201000
Name:PROPELLANT
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: DEFAT. INHALATION: NAUSEA,
VOMITING, & DIZZINESS. EYES: IRRITATION. INGESTION: NAUSEA, &
VOMITING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: DEFAT. INHALATION: NAUSEA, VOMITING, &
DIZZINESS. EYES: IRRITATION. INGESTION: NAUSEA, & VOMITING.
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
IF HEAVILY CONTAMINATED, USE SKIN CREAM AFTERWARDS. INHALATION:
REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING. OBTAIN
MEDICAL ATTENT ION IN ALL CASES. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
===================== Fire Fighting Measures =====================
Flash Point:100.4F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE DIRECT STREAM OF WATER ON CANS TO KEEP
COOL.
Unusual Fire/Explosion Hazard:CONTAINER COULD BURST IF EXPOSED TO HEAT.
MAY FORM TOXIC FUMES OF CHLORINATED HYDROCARBONS IN EVENT OF FIRE &
BURSTING.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB W/INERT MATERIAL. WASH THOROUGHLY
W/WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DON'T PUNCTURE. KEEP AWAY FROM OPEN
FLAME. USE ONLY IN WELL VENTILATED AREA OR IN OPEN AREA. SPRAY AWAY
FROM OPERATOR. SOME PLASTICS MAY CRAZE/CRACK.
Other Precautions:DON'T INHALE.
============= Exposure Controls/Personal Protection =============
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:SEE SUPP.
pH: 7
Appearance and Odor:CLEAR SLIGHT FROTH
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPERATURES, HOT METALS, FLAME, &
OTHER IGNITION SOURCES
Hazardous Decomposition Products:TOXIC GASES
==================== Disposal Considerations ====================
Waste Disposal Methods:ABSORB, ALLOW SOLVENT TO EVAPORATE & THEN
LANDFILL IN ACCORDANCE W/FEDERAL, STATE, & LOCAL REGULATIONS. DON'T
PUNCTURE AEROSOL CAN.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|