===================== Product Identification =====================
MSDS NAME:PLASTI BOND HARDENER
NIIN:00F023713
MSDS Number: BNJHN
=== Responsible Party ===
Company:INTL ADHESIVES/RESINS PTY LTD
Address:TULLAMARINE PARK RD
City:TULLAMARINE
State:VI
Country:AU
Info Phone Num:(03)435-5851
Emergency Phone Num:(03)435-5851
CAGE:GO093
=== Contractor Identification ===
Company:INTERPLASTIC CORP
Address:1225 WOLTER BLVD
City:VADNAIS HEIGHTS
State:MN
ZIP:55110-5145
Country:US
Phone:800-424-9300
CAGE:INTER
Company:INTL ADHESIVES/RESINS PTY LTD
Address:TULLAMARINE PARK RD
City:TULLAMARINE
State:VI
Country:AU
Phone:(03)435-5851
CAGE:GO093
============= Composition/Information on Ingredients =============
Name:BENZOYL PEROXIDE, DI-BENZOYLPEROXIDE
CAS:94-36-0
RTECS #:DM8575000
Fraction by Wt: 50%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: IRRITATION
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. INGESTION: GIVE PLENTY OF
WATER. EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH W/SOAP & WATER.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:>199.4F
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM, CO2
Fire Fighting Procedures:EVACUTE AREA & FIGHT FIRE FROM A SAFE
DISTANCE. ALLOW MATERIAL TO RETURN TO ROOM TEMP. BEFORE CLEANING
UP.
Unusual Fire/Explosion Hazard:HEAVY SMOKE MAY BE EVOLVED IF PRODUCT IS
INVOLVED IN FIRE.
================== Accidental Release Measures ==================
Spill Release Procedures:WET W/WATER IMMEDIATELY & THEN ABSORB W/INERT
MATERIAL SUCH AS VERMICULITE. SAND OR DIRT. SWEEP UP USING
NON-SPARKLING EQUIPMENT & PLACE IN DOUBLE POLYETHLENE BAGS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BETWEEN 32F & 95F.
Other Precautions:AVOID CONTACT W/SKIN & EYES. KEEP OUT OF REACH OF
CHILDREN.
============= Exposure Controls/Personal Protection =============
Ventilation:FRESH AIR
Protective Gloves:NEOPRENE
Eye Protection:GLASSES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Spec Gravity:1.2
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE PASTE & ODORLESS
Percent Volatiles by Volume:20%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, PROMOTORS, ACCELERATORS, READILY OXIDIZABLES, &
METAL SALTS.
Stability Condition to Avoid:HEAT, OPEN FLAMES, SPARKS, IGNITION
SOURCES, DIRECT SUNLIGHT, TEMPS >95F OR <32F
Hazardous Decomposition Products:BIPHENYL
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE, LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|