===================== Product Identification =====================
MSDS NAME:HETRON 28429
NIIN:00N001041
MSDS Number: BCGWY
=== Responsible Party ===
Company:ASHLAND CHEMICAL COMPANY
Address:5200 PAUL G BLAZER MEMORIAL PKWY
City:DUBLIN
State:OH
ZIP:43017
Country:US
CAGE:3L187
=== Contractor Identification ===
Company:ASHLAND CHEMICAL CO DIV OF ASHLAND OIL INC
Address:5200 PAUL G BLAZER MEMORIAL PKWY
Box:City:DUBLIN
State:OH
ZIP:43017
Country:US
CAGE:3L187
============= Composition/Information on Ingredients =============
Name:STYRENE, MONOMER (SARA III)
CAS:100-42-5
RTECS #:WL3675000
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:EYE: SEV IRRIT,RED,BLURR.SKIN: MOD
IRRIT,DEFAT,DERMAT. INH: NASAL IRRIT,DIZ,HDCH,UNCON,POSS ASPHYX
======================= First Aid Measures =======================
First Aid:SKIN: WASH W/ SOAP & WATER. REMOVE CONTAM CLOTHES,WASH BEFORE
REUSING. EYE: FLUSH W/ LG AMT OF WATER. GET MEDICAL ATTN. INH:
REMOVE TO FRESH AIR. IF NEC GIVE ARTIF RESP OR OXYGEN. KEEP
WARM/QUIET. GET MEDICAL ATTN. INGEST: DONT INDUCE VOMIT (SUP DATA
===================== Fire Fighting Measures =====================
Flash Point:73-100F CC
Lower Limits:1.1
Extinguishing Media:REGULAR FOAM, CO*2, DRY CHEM. WATER/FOAM MAY CAUSE
FROTHING.
Fire Fighting Procedures:USE SELF-CONT BRTH APPAR,FULL FACEPIECE,POS
PRESS MODE
Unusual Fire/Explosion Hazard:VAP HEAVIER THAN AIR, MAY MOVE ALONG
GROUND. KEEP FRM ALL IGNIT SOURCES. EMPTY CANS (RESIDUE) ARE HA
================== Accidental Release Measures ==================
Spill Release Procedures:SM SPILL: ABSORB ON PAPER,VERMICULITE OR OTHER
ABSORBENT/TRANSFER TO HOOD. LG SPILL: ELIM IGNIT SOURCES. IF NOT
WEARING PROT EQUIP EXCLUDE FRM AREA. STOP SPILL AT SOURCE,DIKE
AREA,PUMP TO SALVAGE TANK . ABSORB REMAINDER & SHOVEL INTO
CONTAINER
====================== Handling and Storage ======================
Handling and Storage Precautions:CONTAINERS OF THIS MATRL MAY BE HAZ
WHEN EMPTIED BECAUSE OF RESIDUES. ALL HAZ PRECAUTIONS IN THIS MSDS
MUST BE OBSERVED.
Other Precautions:EFFECTS IN LAB ANIMALS FRM OVEREXPOS TO COMPONENTS:
LIVER ABNORMALITIES, KIDNEY DAMAGE, LUNG DAMAGE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD RESP PROT FOR PARTICULAR EXPOS
OF CONCERN.
Ventilation:SUFFIC MECH &/OR LOC EXHST TO MAINTAIN EXPOS BELOW TLV
Protective Gloves:NEOPRENE,BUNA-N
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:NORM WORK CLOTHES COVERING ARMS/LEGS. OSHA
APPRV EYE PROT
Supplemental Safety and Health
EFFECTS OF OVEREXPOS: INGEST: CAN CAUSE G.I.
IRRIT,NAUSEA,VOMIT,DIARRHEA. ASPIR INTO LUNGS CAN CAUSE CHEM PNEUM,
CAN BE FATAL. KEEP WARM/QUIET, GET MEDICAL ATTN. SPEC GRAV:>H*2O. %
VOL:35-40%
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:293F
Vapor Pres:5
Vapor Density:>1.0
Evaporation Rate & Reference:SLOWER THAN ETHER
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES (E.G. NAOH), STRONG MINERAL ACIDS (E.G. HCL)
Hazardous Decomposition Products:MAY FORM CO*2,CO, HCL, VARIOUS
HYDROCARBON
==================== Disposal Considerations ====================
Waste Disposal Methods:SM SPILL:DESTROY BY INCIN (MFR RECM) LG SPILL:
DISPOSAL MUST BE IAW FED, STATE & LOCAL CODES. MFR RECM DESTROY BY
LIQ INCIN, MATRL COLLECTED ON ABSORBENT MATRL MAY BE DEPOSITED IN A
POSTED TOXIC SUBST LANDFILL IAW FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
413 BONDING ADDITIVE
| 108-65-6 |
|
LODYNE HS-300
| 107-41-5 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,A
| 111-15-9
1330-20-7
110-43-0 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,B
| 1330-20-7
111-15-9
110-43-0 |
|
AMOCUT TRI-PURPOSE CUTTING OIL
| |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT A
| 1330-20-7
111-15-9 |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT B
| 1330-20-7
111-15-9 |
|
ACRYLOID 150 OIL ADDITIVE
| |
|
19 BLACK INK
| 67-63-0
71-36-3 |
|
AQUA-SOLV
| 111-76-2 |
|
TRIM MIST
| 7758-09-0 |
|
HEPTANE
| 142-82-5 |
|
ATLAC 382 FB 4010A
| 100-42-5
98-29-3
121-69-7 |
|
HETRON 28429
| 100-42-5 |
|
PROTECTIVE CREAM NO. 211
| 557-05-1
9005-67-8
107-88-0
102-71-6
57-11-4 |
|
411 PROTECTIVE CREAM
| 1314-13-2
57-55-6
102-71-6
106-11-6
57-11-4 |
|
EPOXY THINNER RULE 66
| 78-93-3
67-63-0
110-80-5
108-88-3
1330-20-7 |
|
RUBBER REJUVENATOR,HURST NO. 116
| 108-88-3
67-56-1
78-93-3
75-09-2
110-80-5 |
|
SLIPSTREAM 54, (FORMERLY M-54)
| |
|
VYNA-BOND ADHESIVE
| 78-93-3
109-99-9
108-94-1 |
|
METAL PRIMER A FOR FLEXANE
| |
|
BIOMET TBTO(BUTINOX)
| 56-35-9 |
|
Y-4695, SPRD LUSTRE DP TNT 5
| 8030-30-6 |
|
VARSOL 18
| 8030-30-6 |
|
ISOPAR K
| |
|
DALPAD (A COALESCING AGENT)
| 122-99-6
104-68-7 |
|
CASTOLITE-AP
| 80-62-6
100-42-5 |
|
BRAKE FLUID 455
| 143-22-6 |
|
DOWANOL DB
| 112-34-5 |
|
DERAKANE 411-45,VINYL ESTER RESIN
| 100-42-5 |
|
DERAKANE 411-C-50 VINYL ESTER RESIN, 19634
| 100-42-5 |
|
DOWFROST,HEAT TRANSFER FLUID
| 57-55-6
7758-11-4
7732-18-5 |
|
ESTERON 245 BE HERBICIDE
| 2545-59-7 |
|
ADDITIN 30, R-660
| 90-30-2
91-59-8 |
|
GULFCUT HD SOLUBLE OIL
| 8012-95-1 |
|
ALUMICUT
| 8008-20-6 |
|
D.E.H. (R) 24 EPOXY CURING AGENT, 19191
| 112-24-3
4097-89-6
6531-38-0
24028-46-4 |
|
DERAKANE 510A VINYL ESTER RESIN, 12247
| 100-42-5
68140-84-1 |
|
ADIPRENE L-83
| 584-84-9 |
|
SULFURIC ACID, ELECTROLYTE
| 7664-93-9 |
|
RIDGID NUCLEAR THREAD CUTTING OIL, 16043
| 64742-50-3 |
|
920-Y-131 MIL-C-4556D TYPE G PRIMER
| 71-36-3 |
|
920-W-966,MIL-C-4556D TYPE G TOPCOAT
| 71-36-3
8002-05-9
1330-20-7 |
|
DENFLEX 1162-A
| 79-46-9 |
|
DENFLEX 1162-B
| |
|
INSECTICIDE,METHYL BROMIDE,TYPE 2
| 74-83-9 |
|
DULUX 21667-D,PURE WHITE ALKYD ENAMEL
| 108-88-3
1330-20-7
7439-92-1 |
|
DULUX 72092-D,GRAY ALKYD ENAMEL
| 1330-20-7
7439-92-1
108-88-3 |
|
DULUX 77-S,ENAMEL HARDENER
| 108-88-3
1330-20-7
7440-31-5 |
|
VARI-TEMP 3864-S,ENAMEL REDUCER
| 1330-20-7
80-15-9 |
|
|