===================== Product Identification =====================
MSDS NAME:ATLAC 382 FB 4010A
NIIN:00N001040
MSDS Number: BCGWX
=== Responsible Party ===
Company:ICI AMERICAS INC
Address:NEW MURPHY RD AND CONCORD PIKE
City:WILMINGTON
State:DE
ZIP:19897
Country:US
CAGE:70657
=== Contractor Identification ===
Company:ICI AMERICAS INC FILMS DIV
Address:NEW MURPHY RD AND CONCORD PIKE
Box:City:WILMINGTON
State:DE
ZIP:19897
Country:US
CAGE:70657
============= Composition/Information on Ingredients =============
Name:PROPOXYLATED BISPHENOL-A FUMARATE POLYESTER
Fraction by Wt: 50%
Name:STYRENE, MONOMER (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 50%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:TERTIARY BUTYL CATECHOL
CAS:98-29-3
RTECS #:UX1400000
Name:DIMETHYLANILINE (N,N-DIMETHYL-ANILINE) (SARA III)
CAS:121-69-7
RTECS #:BX4725000
Fraction by Wt: 0.2%
OSHA PEL:S, 5 PPM/10 STEL
ACGIH TLV:S,5 PPM/10 STEL;9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
Effects of Overexposure:EYE/SKIN CONT:BURNS
IRRIT.INHALATION:IRRIT.INGESTION:IRRIT TO MOUTH,ESOPHAGUS,AND
STOMACH.
======================= First Aid Measures =======================
First Aid:EYE CONT:FLUSH WITH WATER 15 MIN,CALL A MD.SKIN CONT:WASH
WITH SOAP & WATER CONTACT MD.INHALATION:REMOVE TO FRESH AIR GIVE
ATIF RESP IF NEEDED.CALL A MD.INGESTION:GIVE 1-2 GLASSES OF WATER
OR MILK TO DRINK,CALL A DR.
===================== Fire Fighting Measures =====================
Flash Point:74F PMCC
Lower Limits:1.1
Upper Limits:6.1
Extinguishing Media:CO*2,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:STYRENE:POLYMERIZATION MAY OCCUR AT
ELEVATED TEMPS.,CLASS IC FLAMMABLE LIQUID.
================== Accidental Release Measures ==================
Spill Release Procedures:SOAP UP WITH AN ABSORBENT SUCH AS SAND,EARTH
OR SAWDUST AND SHOVEL INTO WASTE CONTAINER.COVER AND REMOVE TO A
CHEMICAL WASTE AREA.WEAR EYE PROTECTION,PROTECTIVE CLOTHING AND
RESP PROT DURING CLEAN UP. BURN OFF FLAM MAT OR ALLOW TO
EVAPORATE.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS,OR
FLAMES.CHECK WEEKLY TO DETERMINE INHIBITER AND POLYMER CONTENT IF
STORAGE IS IN EXCESS OF 30 DAYS AT 90F.
Other Precautions:STYRENE VAPORS ARE UNINHIBITED AND MAY FORM POLYMERS
IN VENTS OR FLAME ARRESTORS OF STORAGE TANKS RESULTING IN STOPPAGE
OF VENTS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL TO CONTROL TLV
Protective Gloves:RUBBER GLOVES
Eye Protection:CHEM GOG/FACE SHIELD
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:295F
Vapor Pres:4.3
Vapor Density:3.6
Spec Gravity:0.9
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID,AROMATIC ODOR
Percent Volatiles by Volume:50
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIAL
Stability Condition to Avoid:HEAT,SPARKS,FLAMES
Hazardous Decomposition Products:ACRID FUMES,PHENOL DERIVATIVES AND
CARBON MONOXIDE
Conditions to Avoid Polymerization:HEAT,SPARKS,FLAMES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF WASTE MATERIAL IN ACCORDANCE WITH
LOCAL,STATE, AND FEDERAL POLLUTION REGULATIONS.CONTAINER
DISPOSAL:DO NOT REUSE,DISTRIBUTE,MAKE AVAILABLE OR FURNISH
CONTAINER EXCEPT FOR STORAGE OR SHIPMEN T OF ORIGINAL PRODUCT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
413 BONDING ADDITIVE
| 108-65-6 |
|
LODYNE HS-300
| 107-41-5 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,A
| 111-15-9
1330-20-7
110-43-0 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,B
| 1330-20-7
111-15-9
110-43-0 |
|
AMOCUT TRI-PURPOSE CUTTING OIL
| |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT A
| 1330-20-7
111-15-9 |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT B
| 1330-20-7
111-15-9 |
|
ACRYLOID 150 OIL ADDITIVE
| |
|
19 BLACK INK
| 67-63-0
71-36-3 |
|
AQUA-SOLV
| 111-76-2 |
|
TRIM MIST
| 7758-09-0 |
|
HEPTANE
| 142-82-5 |
|
ATLAC 382 FB 4010A
| 100-42-5
98-29-3
121-69-7 |
|
HETRON 28429
| 100-42-5 |
|
PROTECTIVE CREAM NO. 211
| 557-05-1
9005-67-8
107-88-0
102-71-6
57-11-4 |
|
411 PROTECTIVE CREAM
| 1314-13-2
57-55-6
102-71-6
106-11-6
57-11-4 |
|
EPOXY THINNER RULE 66
| 78-93-3
67-63-0
110-80-5
108-88-3
1330-20-7 |
|
RUBBER REJUVENATOR,HURST NO. 116
| 108-88-3
67-56-1
78-93-3
75-09-2
110-80-5 |
|
SLIPSTREAM 54, (FORMERLY M-54)
| |
|
VYNA-BOND ADHESIVE
| 78-93-3
109-99-9
108-94-1 |
|
METAL PRIMER A FOR FLEXANE
| |
|
BIOMET TBTO(BUTINOX)
| 56-35-9 |
|
Y-4695, SPRD LUSTRE DP TNT 5
| 8030-30-6 |
|
VARSOL 18
| 8030-30-6 |
|
ISOPAR K
| |
|
DALPAD (A COALESCING AGENT)
| 122-99-6
104-68-7 |
|
CASTOLITE-AP
| 80-62-6
100-42-5 |
|
BRAKE FLUID 455
| 143-22-6 |
|
DOWANOL DB
| 112-34-5 |
|
DERAKANE 411-45,VINYL ESTER RESIN
| 100-42-5 |
|
DERAKANE 411-C-50 VINYL ESTER RESIN, 19634
| 100-42-5 |
|
DOWFROST,HEAT TRANSFER FLUID
| 57-55-6
7758-11-4
7732-18-5 |
|
ESTERON 245 BE HERBICIDE
| 2545-59-7 |
|
ADDITIN 30, R-660
| 90-30-2
91-59-8 |
|
GULFCUT HD SOLUBLE OIL
| 8012-95-1 |
|
ALUMICUT
| 8008-20-6 |
|
D.E.H. (R) 24 EPOXY CURING AGENT, 19191
| 112-24-3
4097-89-6
6531-38-0
24028-46-4 |
|
DERAKANE 510A VINYL ESTER RESIN, 12247
| 100-42-5
68140-84-1 |
|
ADIPRENE L-83
| 584-84-9 |
|
SULFURIC ACID, ELECTROLYTE
| 7664-93-9 |
|
RIDGID NUCLEAR THREAD CUTTING OIL, 16043
| 64742-50-3 |
|
920-Y-131 MIL-C-4556D TYPE G PRIMER
| 71-36-3 |
|
920-W-966,MIL-C-4556D TYPE G TOPCOAT
| 71-36-3
8002-05-9
1330-20-7 |
|
DENFLEX 1162-A
| 79-46-9 |
|
DENFLEX 1162-B
| |
|
INSECTICIDE,METHYL BROMIDE,TYPE 2
| 74-83-9 |
|
DULUX 21667-D,PURE WHITE ALKYD ENAMEL
| 108-88-3
1330-20-7
7439-92-1 |
|
DULUX 72092-D,GRAY ALKYD ENAMEL
| 1330-20-7
7439-92-1
108-88-3 |
|
DULUX 77-S,ENAMEL HARDENER
| 108-88-3
1330-20-7
7440-31-5 |
|
VARI-TEMP 3864-S,ENAMEL REDUCER
| 1330-20-7
80-15-9 |
|
|