===================== Product Identification =====================
MSDS NAME:413 BONDING ADDITIVE
NIIN:00N001013
MSDS Number: BCGVX
=== Responsible Party ===
Company:TENNANT CO
Address:701 N LILAC DR
Box:1452
City:MINNEAPOLIS
State:MN
ZIP:55440-1452
Country:US
Info Phone Num:612-540-1381
Emergency Phone Num:612-544-5163
CAGE:59500
=== Contractor Identification ===
Company:TENNANT CO
Address:701 N LILAC DR
Box:1452
City:MINNEAPOLIS
State:MN
ZIP:55440-1452
Country:US
Phone:612-540-1556/800-553-8033
CAGE:59500
============= Composition/Information on Ingredients =============
Name:PROPYLENE GLYCOL METHYL ETHER ACETATE
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: 70-80%
Other REC Limits:NONE SPECIFIED
Name:PROPRIETARY ADDITIVES
Fraction by Wt: 20-30%
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT CAUSES MILD IRRITATION OF BODY
TISSUES. IT DEPRESSES THE CENTRAL NERVOUS SYSTEM AND MAY CAUSE
KIDNEY AND LIVER DAMAGE. IT MAY BE FATAL IF INGESTED.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYE:SEVERE IRRITATION POSSIBLE CORNEAL DAMAGE.
SKIN:MILD IRRITATION,IT MAY SENSITIZE ACUTE ALLERGIC DERMATITIS.
INHALED:RESPIRATIORY IRRITATION, CENTRAL NERVOUS SYSTEM DEPRESSION.
INGESTED:G/I IRRITA TION AND DISTRESS. LOW SINGLE DOSE TOXICITY.IT
MAY CAUSE LIVER AND/OR KIDNEY DAMAGE.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF KIDNEY OR
LIVER DISORDERS MAYBE AT INCREASED RISK FROM EXPOSURE.
======================= First Aid Measures =======================
First Aid:EYE:FLUSH W/WATER 15 MIN, HOLD LIDS OPEN. SKIN:WASH WITH
SOAP & WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE
REUSE. INHALED:REMOVE TO FRESH AIR. RESTORE BREATHING IF
NECESSARY. INGESTED:D O NOT INDUCE VOMITING. GIVE 2 LARGE GLASSES
OF MILK OR WATER AND GET IMMEDIATE MEDICAL CARE. GIVE NOTHING BY
MOUTH IF UNCONSCIOUS. IF IRRITATION PERSISTS OR IS SEVERE,SEE A
DOCTOR.
===================== Fire Fighting Measures =====================
Flash Point:108F,42C
Lower Limits:1.5
Upper Limits:7.0
Extinguishing Media:USE CARBON DIOXIDE, FOAM, OR DRY CHEMICAL. (NFPA
CLASS B)
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:WATER MAY BE INEFFECTIVE IN FIGHTING
FIRE. FIRE OR EXCESSIVE HEAT MAY CAUSE PRODUCTION OF HAZARDOUS
DECOMPOSITION PRODUCTS. CLOSED CONTAINERS MAY RUPTURE.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE SOURCES OF IGNITION & VENTILATE
AREA. WIPE/SOAK UP WITH PAPER TOWEL OR INERT ABSORBENT. PUT IN
DISPOSAL CONTAINER. FLUSH RESIDUE WITH WATER. LARGE SPILL:
VENTILATE AREA. IF POSSIBLE, STOP LE AK. DIKE TO RETAIN RUN OFF.
VACUUM UP FREE LIQUID.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. WATER DILUTION
RECOMMENDED.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. PROTECT
CONTAINERS FROM PHYSICAL DAMAGE.
Other Precautions:NONE
============= Exposure Controls/Personal Protection =============
Respiratory Protection:RESPIRATOR WILL NOT NORMALLY BE NECESSARY. USE
NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC DUST/MIST IF EXPOSURE IS
ABOVE THE TLV/PEL. SEE 29 CFR 1910.134 FOR REGULATIONS PERTAINING
TO RESPIRATOR USE.
Ventilation:NORMAL VENTILATION IS USUALLY SUFFICIENT. SUPPLEMENT WITH
LOCAL EXHAUST IF PEL/TLV IS EXCEEDED.
Protective Gloves:NEOPRENE, NITRILE, PVC OR NATURAL RUBBER
Eye Protection:SAFETY GLASSES OR SPLASH GOGGLES
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER. AVOID
PROLONGED AND/OR REPEATED CONTACT BY USING APPROPRIATE CLOTHING.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. AVOID ANY UNNECESSARY CONTACT.
Supplemental Safety and Health
PART NO 08526.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:295F,146C
Vapor Pres:3.7 MM
Vapor Density:>1
Spec Gravity:1.00
Evaporation Rate & Reference:<1 (BUTYL ACETATE = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID, ESTER LIKE ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NO INFORMATION GIVEN BY MANUFACTURER
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
SILICON OXIDES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS. DGSC-SSH SUGGESTS THAT DISPOSAL MAY BE DONE BY
INCINERATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
413 BONDING ADDITIVE
| 108-65-6 |
|
LODYNE HS-300
| 107-41-5 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,A
| 111-15-9
1330-20-7
110-43-0 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,B
| 1330-20-7
111-15-9
110-43-0 |
|
AMOCUT TRI-PURPOSE CUTTING OIL
| |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT A
| 1330-20-7
111-15-9 |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT B
| 1330-20-7
111-15-9 |
|
ACRYLOID 150 OIL ADDITIVE
| |
|
19 BLACK INK
| 67-63-0
71-36-3 |
|
AQUA-SOLV
| 111-76-2 |
|
TRIM MIST
| 7758-09-0 |
|
HEPTANE
| 142-82-5 |
|
ATLAC 382 FB 4010A
| 100-42-5
98-29-3
121-69-7 |
|
HETRON 28429
| 100-42-5 |
|
PROTECTIVE CREAM NO. 211
| 557-05-1
9005-67-8
107-88-0
102-71-6
57-11-4 |
|
411 PROTECTIVE CREAM
| 1314-13-2
57-55-6
102-71-6
106-11-6
57-11-4 |
|
EPOXY THINNER RULE 66
| 78-93-3
67-63-0
110-80-5
108-88-3
1330-20-7 |
|
RUBBER REJUVENATOR,HURST NO. 116
| 108-88-3
67-56-1
78-93-3
75-09-2
110-80-5 |
|
SLIPSTREAM 54, (FORMERLY M-54)
| |
|
VYNA-BOND ADHESIVE
| 78-93-3
109-99-9
108-94-1 |
|
METAL PRIMER A FOR FLEXANE
| |
|
BIOMET TBTO(BUTINOX)
| 56-35-9 |
|
Y-4695, SPRD LUSTRE DP TNT 5
| 8030-30-6 |
|
VARSOL 18
| 8030-30-6 |
|
ISOPAR K
| |
|
DALPAD (A COALESCING AGENT)
| 122-99-6
104-68-7 |
|
CASTOLITE-AP
| 80-62-6
100-42-5 |
|
BRAKE FLUID 455
| 143-22-6 |
|
DOWANOL DB
| 112-34-5 |
|
DERAKANE 411-45,VINYL ESTER RESIN
| 100-42-5 |
|
DERAKANE 411-C-50 VINYL ESTER RESIN, 19634
| 100-42-5 |
|
DOWFROST,HEAT TRANSFER FLUID
| 57-55-6
7758-11-4
7732-18-5 |
|
ESTERON 245 BE HERBICIDE
| 2545-59-7 |
|
ADDITIN 30, R-660
| 90-30-2
91-59-8 |
|
GULFCUT HD SOLUBLE OIL
| 8012-95-1 |
|
ALUMICUT
| 8008-20-6 |
|
D.E.H. (R) 24 EPOXY CURING AGENT, 19191
| 112-24-3
4097-89-6
6531-38-0
24028-46-4 |
|
DERAKANE 510A VINYL ESTER RESIN, 12247
| 100-42-5
68140-84-1 |
|
ADIPRENE L-83
| 584-84-9 |
|
SULFURIC ACID, ELECTROLYTE
| 7664-93-9 |
|
RIDGID NUCLEAR THREAD CUTTING OIL, 16043
| 64742-50-3 |
|
920-Y-131 MIL-C-4556D TYPE G PRIMER
| 71-36-3 |
|
920-W-966,MIL-C-4556D TYPE G TOPCOAT
| 71-36-3
8002-05-9
1330-20-7 |
|
DENFLEX 1162-A
| 79-46-9 |
|
DENFLEX 1162-B
| |
|
INSECTICIDE,METHYL BROMIDE,TYPE 2
| 74-83-9 |
|
DULUX 21667-D,PURE WHITE ALKYD ENAMEL
| 108-88-3
1330-20-7
7439-92-1 |
|
DULUX 72092-D,GRAY ALKYD ENAMEL
| 1330-20-7
7439-92-1
108-88-3 |
|
DULUX 77-S,ENAMEL HARDENER
| 108-88-3
1330-20-7
7440-31-5 |
|
VARI-TEMP 3864-S,ENAMEL REDUCER
| 1330-20-7
80-15-9 |
|
|