===================== Product Identification =====================
MSDS NAME:RUBBER REJUVENATOR,HURST NO. 116
NIIN:00N001046
MSDS Number: BCGXF
=== Responsible Party ===
Company:HURST GRAPHICS,INC.
Emergency Phone Num:213-223-4121
CAGE:GO970
=== Contractor Identification ===
Company:HURST GRAPHICS INC
Address:2500 SAN FERNANDO RD
Box:City:LOS ANGELES
State:CA
ZIP:90065-1324
Country:US
Phone:213-223-4121
CAGE:54627
Company:HURST GRAPHICS,INC.
CAGE:GO970
============= Composition/Information on Ingredients =============
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:METHYL ALCOHOL (METHANOL) (SARA III)
CAS:67-56-1
RTECS #:PC1400000
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:METHYLENE CHLORIDE (SARA III)
CAS:75-09-2
RTECS #:PA8050000
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:2-ETHOXYETHANOL (EGEE) (SARA III)
CAS:110-80-5
RTECS #:KK8050000
OSHA PEL:S,200 PPM
ACGIH TLV:S, 5 PPM; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:VE TO FRESH AIR,APPLY ARTIF RESP IF NEC.CALL A
MD.SKIN CONT:WASH W/SOAP AND WATER,APPLY MILD SKIN CR
======================= First Aid Measures =======================
First Aid:EAM,IN SEVERE CASES CALL A MD. EYE CONT:FLUSH W/WATER,CALL A
DR.INGESTION:CALL A DR.
===================== Fire Fighting Measures =====================
Extinguishing Media:DRYING OF SKIN,EYE
IRRIT,INHALAT:ANESTHESIA,HEADACHE,DIZZINE
Fire Fighting Procedures:SS,NAUSEA,UPPER RESPIRAT IRRIT.
================== Accidental Release Measures ==================
Spill Release Procedures:FLUSH WITH WATER INTO A RETAINING AREA OR
CONTAINER.AVOID SPARKS,FIRE OR HOT METAL SURFACES.SMALL QUANTITIES
MAY BE ABSORBED INTO AN APPROPRIATE ABSORBANT.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP COOL AND AWAY FROM SOURCES OF
IGNITION.USE WITH ADEQUATE VENTILATION.AVOID PROLONGED OR REPEATED
PERSONAL CONTACT.
Other Precautions:DO NOT USE COPPER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL EXHAUST
Protective Gloves:IMPERMEABLE
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:APRON,BARRIER CREAM
Supplemental Safety and Health
ADD INGRED:MINERAL SPIRITS.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:110-245F
Vapor Pres:220
Vapor Density:3.1
Spec Gravity:0.94
Evaporation Rate & Reference:14.5(N-BU.AC.)
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR,RED,CHARACT CHLORINAT-OXYGENAT PETROL ODOR.
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STROGN OXIDIZING AGENTS,STRONG ACIDS OR BASES,SELECTED AMINE
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAME,FIRE
Hazardous Decomposition Products:THERMAL DECOMP:CARBON MONOXIDE AND/OR
CARBON DIOXIDE
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
IN ACCORDANCE WITH APPLICABLE LOCAL,STATE AND FEDERAL REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
413 BONDING ADDITIVE
| 108-65-6 |
|
LODYNE HS-300
| 107-41-5 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,A
| 111-15-9
1330-20-7
110-43-0 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,B
| 1330-20-7
111-15-9
110-43-0 |
|
AMOCUT TRI-PURPOSE CUTTING OIL
| |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT A
| 1330-20-7
111-15-9 |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT B
| 1330-20-7
111-15-9 |
|
ACRYLOID 150 OIL ADDITIVE
| |
|
19 BLACK INK
| 67-63-0
71-36-3 |
|
AQUA-SOLV
| 111-76-2 |
|
TRIM MIST
| 7758-09-0 |
|
HEPTANE
| 142-82-5 |
|
ATLAC 382 FB 4010A
| 100-42-5
98-29-3
121-69-7 |
|
HETRON 28429
| 100-42-5 |
|
PROTECTIVE CREAM NO. 211
| 557-05-1
9005-67-8
107-88-0
102-71-6
57-11-4 |
|
411 PROTECTIVE CREAM
| 1314-13-2
57-55-6
102-71-6
106-11-6
57-11-4 |
|
EPOXY THINNER RULE 66
| 78-93-3
67-63-0
110-80-5
108-88-3
1330-20-7 |
|
RUBBER REJUVENATOR,HURST NO. 116
| 108-88-3
67-56-1
78-93-3
75-09-2
110-80-5 |
|
SLIPSTREAM 54, (FORMERLY M-54)
| |
|
VYNA-BOND ADHESIVE
| 78-93-3
109-99-9
108-94-1 |
|
METAL PRIMER A FOR FLEXANE
| |
|
BIOMET TBTO(BUTINOX)
| 56-35-9 |
|
Y-4695, SPRD LUSTRE DP TNT 5
| 8030-30-6 |
|
VARSOL 18
| 8030-30-6 |
|
ISOPAR K
| |
|
DALPAD (A COALESCING AGENT)
| 122-99-6
104-68-7 |
|
CASTOLITE-AP
| 80-62-6
100-42-5 |
|
BRAKE FLUID 455
| 143-22-6 |
|
DOWANOL DB
| 112-34-5 |
|
DERAKANE 411-45,VINYL ESTER RESIN
| 100-42-5 |
|
DERAKANE 411-C-50 VINYL ESTER RESIN, 19634
| 100-42-5 |
|
DOWFROST,HEAT TRANSFER FLUID
| 57-55-6
7758-11-4
7732-18-5 |
|
ESTERON 245 BE HERBICIDE
| 2545-59-7 |
|
ADDITIN 30, R-660
| 90-30-2
91-59-8 |
|
GULFCUT HD SOLUBLE OIL
| 8012-95-1 |
|
ALUMICUT
| 8008-20-6 |
|
D.E.H. (R) 24 EPOXY CURING AGENT, 19191
| 112-24-3
4097-89-6
6531-38-0
24028-46-4 |
|
DERAKANE 510A VINYL ESTER RESIN, 12247
| 100-42-5
68140-84-1 |
|
ADIPRENE L-83
| 584-84-9 |
|
SULFURIC ACID, ELECTROLYTE
| 7664-93-9 |
|
RIDGID NUCLEAR THREAD CUTTING OIL, 16043
| 64742-50-3 |
|
920-Y-131 MIL-C-4556D TYPE G PRIMER
| 71-36-3 |
|
920-W-966,MIL-C-4556D TYPE G TOPCOAT
| 71-36-3
8002-05-9
1330-20-7 |
|
DENFLEX 1162-A
| 79-46-9 |
|
DENFLEX 1162-B
| |
|
INSECTICIDE,METHYL BROMIDE,TYPE 2
| 74-83-9 |
|
DULUX 21667-D,PURE WHITE ALKYD ENAMEL
| 108-88-3
1330-20-7
7439-92-1 |
|
DULUX 72092-D,GRAY ALKYD ENAMEL
| 1330-20-7
7439-92-1
108-88-3 |
|
DULUX 77-S,ENAMEL HARDENER
| 108-88-3
1330-20-7
7440-31-5 |
|
VARI-TEMP 3864-S,ENAMEL REDUCER
| 1330-20-7
80-15-9 |
|
|