===================== Product Identification =====================
MSDS NAME:920-W-966,MIL-C-4556D TYPE G TOPCOAT
NIIN:00N001074
MSDS Number: BCGYN
=== Responsible Party ===
Company:COOK PAINT & VARNISH CO
Address:919 E 14TH AVE
Box:389
City:KANSAS CITY
State:MO
ZIP:64116-3703
Country:US
CAGE:EO598
=== Contractor Identification ===
Company:COOK PAINT & VARNISH CO., KANSAS CITY, MO 64141
Box:389
CAGE:EO598
Company:COOK PAINT AND VARNISH CO
Address:919 E 14TH AVE
Box:389
City:KANSAS CITY
State:MO
ZIP:64116-3703
Country:US
Phone:816-471-1755
CAGE:72225
============= Composition/Information on Ingredients =============
Name:EPOXY RESIN
Fraction by Wt: 25%
Name:N-BUTYL ALCOHOL (SARA III)
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 15%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)
CAS:8002-05-9
RTECS #:SE7449000
Fraction by Wt: 10%
OSHA PEL:400 PPM
ACGIH TLV:400 PPM; 8990
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:SKIN/EYE: IRRIT. INHALATION:
ANESTHETIC,IRRIT,CNS DEPRESSION,HEADACHE,DIZZINESS,STAG GAIT,COMA.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR,RESTORE BREATH,NOTIFY A MD.
EYE CONT: FLUSH WITH WATER 15 MIN,TAKE TO A PHYSICIAN. SKIN CONT:
REMOVE CONTAM CLOTH,WASH WITH WATER,CONDSULT MD. INGESTION: DO NOT
INDUCE VOMITING. CALL A MD. IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point:81F(SETAFLASH)
Extinguishing Media:CARBON DIOXIDE,DRY CHEM,FOAM,CLASS B EXTINGUISHER
Fire Fighting Procedures:SELF CONT BREATH APP,PROT CLOTH,WATER FOG TO
COOL CONT
Unusual Fire/Explosion Hazard:CLOSED CONT MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. RESIDUAL IN DRUM CAN IGNITE
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID BREATH
VAPORS,VENT AREA. CONTAIN AND REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP FROM HEAT,SPARKS & OPEN FLAME. DO
NOT STORE ABOVE 120F. GROUND CONTAIN WHEN POURING,AVOID FREE FALL
OF LIQUID IN EXCSS OF FEW INCHES
Other Precautions:USE WITH ADEQUATE VENT,AND RESP EQUIP. WASH HANDS
AFTER USING & BEFORE EATING OR SMOKING. DO NOT CUT,PUNCTURE OR WELD
ON OR NEAR EMPTY CONT. KEEP OUT OF REACH OF CHILDREN
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:MECHANICA/LOCAL EXHAUST
Protective Gloves:RECOMMEND
Eye Protection:EYEWEAR WITH SPLASH GUARD
Supplemental Safety and Health
THIS IS A TWO COMPONENT SYSTEM,THE MIXTURE WILL HAVE HAZARDS OF BOTH.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:230-340F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:54
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:FUMES WHEN HEATED CONT CARBON MONOXIDE
& OXIDE OF NITROGEN
Conditions to Avoid Polymerization:ELEVATED TEMPS
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE,AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
INCINERATE IN APPROVED FACILITY
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
413 BONDING ADDITIVE
| 108-65-6 |
|
LODYNE HS-300
| 107-41-5 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,A
| 111-15-9
1330-20-7
110-43-0 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,B
| 1330-20-7
111-15-9
110-43-0 |
|
AMOCUT TRI-PURPOSE CUTTING OIL
| |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT A
| 1330-20-7
111-15-9 |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT B
| 1330-20-7
111-15-9 |
|
ACRYLOID 150 OIL ADDITIVE
| |
|
19 BLACK INK
| 67-63-0
71-36-3 |
|
AQUA-SOLV
| 111-76-2 |
|
TRIM MIST
| 7758-09-0 |
|
HEPTANE
| 142-82-5 |
|
ATLAC 382 FB 4010A
| 100-42-5
98-29-3
121-69-7 |
|
HETRON 28429
| 100-42-5 |
|
PROTECTIVE CREAM NO. 211
| 557-05-1
9005-67-8
107-88-0
102-71-6
57-11-4 |
|
411 PROTECTIVE CREAM
| 1314-13-2
57-55-6
102-71-6
106-11-6
57-11-4 |
|
EPOXY THINNER RULE 66
| 78-93-3
67-63-0
110-80-5
108-88-3
1330-20-7 |
|
RUBBER REJUVENATOR,HURST NO. 116
| 108-88-3
67-56-1
78-93-3
75-09-2
110-80-5 |
|
SLIPSTREAM 54, (FORMERLY M-54)
| |
|
VYNA-BOND ADHESIVE
| 78-93-3
109-99-9
108-94-1 |
|
METAL PRIMER A FOR FLEXANE
| |
|
BIOMET TBTO(BUTINOX)
| 56-35-9 |
|
Y-4695, SPRD LUSTRE DP TNT 5
| 8030-30-6 |
|
VARSOL 18
| 8030-30-6 |
|
ISOPAR K
| |
|
DALPAD (A COALESCING AGENT)
| 122-99-6
104-68-7 |
|
CASTOLITE-AP
| 80-62-6
100-42-5 |
|
BRAKE FLUID 455
| 143-22-6 |
|
DOWANOL DB
| 112-34-5 |
|
DERAKANE 411-45,VINYL ESTER RESIN
| 100-42-5 |
|
DERAKANE 411-C-50 VINYL ESTER RESIN, 19634
| 100-42-5 |
|
DOWFROST,HEAT TRANSFER FLUID
| 57-55-6
7758-11-4
7732-18-5 |
|
ESTERON 245 BE HERBICIDE
| 2545-59-7 |
|
ADDITIN 30, R-660
| 90-30-2
91-59-8 |
|
GULFCUT HD SOLUBLE OIL
| 8012-95-1 |
|
ALUMICUT
| 8008-20-6 |
|
D.E.H. (R) 24 EPOXY CURING AGENT, 19191
| 112-24-3
4097-89-6
6531-38-0
24028-46-4 |
|
DERAKANE 510A VINYL ESTER RESIN, 12247
| 100-42-5
68140-84-1 |
|
ADIPRENE L-83
| 584-84-9 |
|
SULFURIC ACID, ELECTROLYTE
| 7664-93-9 |
|
RIDGID NUCLEAR THREAD CUTTING OIL, 16043
| 64742-50-3 |
|
920-Y-131 MIL-C-4556D TYPE G PRIMER
| 71-36-3 |
|
920-W-966,MIL-C-4556D TYPE G TOPCOAT
| 71-36-3
8002-05-9
1330-20-7 |
|
DENFLEX 1162-A
| 79-46-9 |
|
DENFLEX 1162-B
| |
|
INSECTICIDE,METHYL BROMIDE,TYPE 2
| 74-83-9 |
|
DULUX 21667-D,PURE WHITE ALKYD ENAMEL
| 108-88-3
1330-20-7
7439-92-1 |
|
DULUX 72092-D,GRAY ALKYD ENAMEL
| 1330-20-7
7439-92-1
108-88-3 |
|
DULUX 77-S,ENAMEL HARDENER
| 108-88-3
1330-20-7
7440-31-5 |
|
VARI-TEMP 3864-S,ENAMEL REDUCER
| 1330-20-7
80-15-9 |
|
|