===================== Product Identification =====================
MSDS NAME:INSECTICIDE,METHYL BROMIDE,TYPE 2
NIIN:00N001076
MSDS Number: BCGYR
=== Responsible Party ===
Company:DOW CHEMICAL USA
Address:2020 DOW CENTER
City:MIDLAND
State:MI
ZIP:48640-6030
Country:US
CAGE:EO044
=== Contractor Identification ===
Company:DOW CHEMICAL CO
Address:100 LARKIN CENTER
Box:City:MIDLAND
State:MI
ZIP:48674
Country:US
Phone:800-258-2436
CAGE:96717
Company:DOW CHEMICAL USA
Address:2020 DOW CENTER
City:MIDLAND
State:MI
ZIP:48640-6030
Country:US
CAGE:EO044
============= Composition/Information on Ingredients =============
Name:METHYL BROMIDE (SARA III)
CAS:74-83-9
RTECS #:PA4900000
Fraction by Wt: 100%
OSHA PEL:S,C, 20 PPM
ACGIH TLV:S, 5 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:INHALATION:
NAUSEA,DIZZINESS,UNCONSCIOUSNESS,RESP EDEMA & CNS INJURY,
SKIN/EYES: FROST TYPE BURN
======================= First Aid Measures =======================
First Aid:EYE CONT: FLUSH WITH WATER FOR 15 MIN. CONSULT MD. SKIN CONT:
REMOVE TO FRESH AIR,REMOVE CONTAM CLOTH & WASH SKIN WITH SOAP &
WATER. INHALATION: REMOVE TO FRESH AIR,GIVE ARTIFICIAL RESP IF
NEEDED,CONT MD IMMED. NOTE: EFFECTS MAY BE DELAYEDIN ONSET.
===================== Fire Fighting Measures =====================
Lower Limits:10
Upper Limits:15
Extinguishing Media:FOR COOLING: WATER FOG,FOAM,CO2,DRY
CHEMICAL,ALCOHOL FOAM
Fire Fighting Procedures:SELF-CONT RESP EQUIP. DO NOT USE CART TYPE GAS
MASK.
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE VIOLENTLY IN FIRE
DUE TO OVER PRESSURE.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE AREA. USE SELF-CONTAINED BREATHING
APPARATUS TO ENTER AREA
====================== Handling and Storage ======================
Handling and Storage Precautions:MONITOR WITH SUITABLE DETECTING
EQUIPMENT. NEVER WEAR GLOVES,FINGER RINGS OR ADHESIVE BANDAGE ON
HANDS WHEN HANDLING.
Other Precautions:REMOVE CLOTHING PROMPTLY IF SPILLED PROVIDE WASH FAC
FOR EYES & SKIN NEAR WORK AREA. VAPOR TRAPPED NEXT TO SKIN MAY
CAUSE SEVERE,DELAYED BURNS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS OR EQUIP.
Ventilation:CLOSED SYSTEM FOR HANDLING EXCEPT AS FUMIGANT
Eye Protection:SAFETY GLASS WITH SID SHD
Other Protective Equipment:DO NOT USE ORDINARY RUBBER PROT CLOTHING
INCLUD GLOVES/BOOTS
Supplemental Safety and Health
PRODUCT IS DIFFICULT TO IGNITE DUE TO LIMITED FLAMMABLE CONCENTRATION
RANGE. AUTOIGNITION TEMP 998F,537C. VAP PRESS: 1400 MMHG AT 20C.
NOT FOR MILITARY USE
================== Physical/Chemical Properties ==================
HCC:G1
Boiling Pt:B.P. Text:38.4F 3.6C
Vapor Density:3.27
Spec Gravity:1.732
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS,LIQUIFIED GAS UNDER PRESSURE
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ALUMINUM AND MAGNESIUM.
Stability Condition to Avoid:WATER WILL CAUSE CORROSION OF CONTAINER
Hazardous Decomposition Products:HYDROGEN BROMIDE IF EXPOSED TO HOT
FLAME
==================== Disposal Considerations ====================
Waste Disposal Methods:LET EVAPORATE-KEEP PEOPLE OUT OF AREA UNTIL
HALIDE DETECTOR SHOWS ABSENCE OF HARMFUL CONCENTRATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
413 BONDING ADDITIVE
| 108-65-6 |
|
LODYNE HS-300
| 107-41-5 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,A
| 111-15-9
1330-20-7
110-43-0 |
|
4701 BATTLESHIP GRAY CHEM RESIST URETHANE,B
| 1330-20-7
111-15-9
110-43-0 |
|
AMOCUT TRI-PURPOSE CUTTING OIL
| |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT A
| 1330-20-7
111-15-9 |
|
4730 GRAY CHEMICAL RESISTANT URETHANE, PT B
| 1330-20-7
111-15-9 |
|
ACRYLOID 150 OIL ADDITIVE
| |
|
19 BLACK INK
| 67-63-0
71-36-3 |
|
AQUA-SOLV
| 111-76-2 |
|
TRIM MIST
| 7758-09-0 |
|
HEPTANE
| 142-82-5 |
|
ATLAC 382 FB 4010A
| 100-42-5
98-29-3
121-69-7 |
|
HETRON 28429
| 100-42-5 |
|
PROTECTIVE CREAM NO. 211
| 557-05-1
9005-67-8
107-88-0
102-71-6
57-11-4 |
|
411 PROTECTIVE CREAM
| 1314-13-2
57-55-6
102-71-6
106-11-6
57-11-4 |
|
EPOXY THINNER RULE 66
| 78-93-3
67-63-0
110-80-5
108-88-3
1330-20-7 |
|
RUBBER REJUVENATOR,HURST NO. 116
| 108-88-3
67-56-1
78-93-3
75-09-2
110-80-5 |
|
SLIPSTREAM 54, (FORMERLY M-54)
| |
|
VYNA-BOND ADHESIVE
| 78-93-3
109-99-9
108-94-1 |
|
METAL PRIMER A FOR FLEXANE
| |
|
BIOMET TBTO(BUTINOX)
| 56-35-9 |
|
Y-4695, SPRD LUSTRE DP TNT 5
| 8030-30-6 |
|
VARSOL 18
| 8030-30-6 |
|
ISOPAR K
| |
|
DALPAD (A COALESCING AGENT)
| 122-99-6
104-68-7 |
|
CASTOLITE-AP
| 80-62-6
100-42-5 |
|
BRAKE FLUID 455
| 143-22-6 |
|
DOWANOL DB
| 112-34-5 |
|
DERAKANE 411-45,VINYL ESTER RESIN
| 100-42-5 |
|
DERAKANE 411-C-50 VINYL ESTER RESIN, 19634
| 100-42-5 |
|
DOWFROST,HEAT TRANSFER FLUID
| 57-55-6
7758-11-4
7732-18-5 |
|
ESTERON 245 BE HERBICIDE
| 2545-59-7 |
|
ADDITIN 30, R-660
| 90-30-2
91-59-8 |
|
GULFCUT HD SOLUBLE OIL
| 8012-95-1 |
|
ALUMICUT
| 8008-20-6 |
|
D.E.H. (R) 24 EPOXY CURING AGENT, 19191
| 112-24-3
4097-89-6
6531-38-0
24028-46-4 |
|
DERAKANE 510A VINYL ESTER RESIN, 12247
| 100-42-5
68140-84-1 |
|
ADIPRENE L-83
| 584-84-9 |
|
SULFURIC ACID, ELECTROLYTE
| 7664-93-9 |
|
RIDGID NUCLEAR THREAD CUTTING OIL, 16043
| 64742-50-3 |
|
920-Y-131 MIL-C-4556D TYPE G PRIMER
| 71-36-3 |
|
920-W-966,MIL-C-4556D TYPE G TOPCOAT
| 71-36-3
8002-05-9
1330-20-7 |
|
DENFLEX 1162-A
| 79-46-9 |
|
DENFLEX 1162-B
| |
|
INSECTICIDE,METHYL BROMIDE,TYPE 2
| 74-83-9 |
|
DULUX 21667-D,PURE WHITE ALKYD ENAMEL
| 108-88-3
1330-20-7
7439-92-1 |
|
DULUX 72092-D,GRAY ALKYD ENAMEL
| 1330-20-7
7439-92-1
108-88-3 |
|
DULUX 77-S,ENAMEL HARDENER
| 108-88-3
1330-20-7
7440-31-5 |
|
VARI-TEMP 3864-S,ENAMEL REDUCER
| 1330-20-7
80-15-9 |
|
|