ing 3: knowledgable in handling these materials. trimethyalmine functionalized, chloromethylated copolymer water other prec: contemplated. before using strong oxidizing
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SOLID OR DUST MAY CAUSE EYE IRRITATION
OR CORNEAL INJURY DUE TO MECHANICAL ACTION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH LARGE AMOUNT OF WATER FOR AT LEAST 15
MINUTES. CONSULT MD. INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTIFICIAL RESPIRATION) CALL
MD (F P N). SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .
===================== Fire Fighting Measures =====================
Extinguishing Media:USE WATER OR DRY CHEMICAL TO EXTINGUISH FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Spill Release Procedures:VACUUM OR SWEEP UP SPILL AND TRANSFER TO
CONTAINERS FOR RECOVERY OR DISPOSAL. FLOOR MAY BE SLIPPERY; USE
CARE TO AVOID FALLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT AMBIENT TEMPS. AVOID REPEATED
FREEZE-THAW CYCLES. DO NOT PACK COLUMN W/DRY ION EXHANGE RESINS.
DRY BEADS EXPAND WHEN WET; THIS (SUPP DATA)
Other Precautions:NITRIC ACID & OTHER STRONG OXIDIZING AGENTS CAN CAUSE
EXPLOSIVE TYPE REACTIONS WHEN MIXED W/ION EXHANGE RESINS. PROPER
DESIGN OF EQUIP TO PVNT RAPID BUILD-UP OF PRESS IS NEC IF USE OF AN
OXIDIZING AGE NT SUCH AS NITRIC ACID IS (ING 3)
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Vapor Pres:SUPP DATA
Spec Gravity:1.2
Evaporation Rate & Reference:1 (H2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE TO AMBER SOLID BEADS; ODORLESS TO SLIGHT
AMINE ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/CONCENTRATED NITRIC ACID/ANY OTHER STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT (GREATER THAN 90C
(194F).
Hazardous Decomposition Products:STYRENE, DIVINYLBENZENE MONOMERS &
SULFUR DIOXIDE. (SUPP DATA)
Waste Disposal Methods:DISPOSE OF RESIN IN LICENSED INDUSTRIAL WASTE
LANDFILL/BURN IN APPROVED INCINERATOR ACCORDING TO LOCAL, STATE AND
FEDERAL REGULATIONS. FOR RESIN CONTAMINATED WITH HAZARDOUS MATL,
DISPOSE OF MIXTURE AS HAZ MATL ACCORDING TO LOCAL, STATE ANDFED
REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.