===================== Product Identification =====================
MSDS NAME:PIONEER 568 ASPHALT
NIIN:00-851-8380
MSDS Number: BNTLT
=== Responsible Party ===
Company:PIONEER ASPHALT CORPORATION
Address:802 ASH STREET
City:LAWRENCEVILLE
State:IL
ZIP:62439
Country:US
Info Phone Num:618-943-3341
Emergency Phone Num:618-943-3341
Preparer's Name:TIM REEDER
CAGE:0GYV3
=== Contractor Identification ===
Company:PIONEER ASPHALT CORP
Address:802 ASH ST
Box:City:LAWRENCEVILLE
State:IL
ZIP:62439
Country:US
Phone:618-943-3341
CAGE:0GYV3
============= Composition/Information on Ingredients =============
Name:ASPHALT
CAS:8052-42-4
RTECS #:CI9900000
Other REC Limits:5 MG/M3
ACGIH TLV:5 MG/M3
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:COOL SOLID MAT'L NOT EXPECTED TO CAUSE
EYE/SKIN IRRIT, NOR ACUTE SYSTEMIC TOXICITY BY INGEST. HEATED:
RESPIRATORY TRACT IRRIT, HEADACHES, DIZZINESS, NAUSEA, GI TRACT
IRRIT, COUGHING, SENSATION OF DRYN ESS & PAIN OF NOSE, THROAT,
CHEST. CONFUSION & UNCONSCIOUSNESS. DEATH OCCURED FOLLOWING EXPOS
TO 600 PPM.
Effects of Overexposure:UPPER RESPIRATORY TRACT, EYE AND SKIN
IRRITATION. FUMES FROM HOT MATERIAL MAY CAUSE NAUSEA AND IRRITATION
OF UPPER RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:NONE KNOWN.
======================= First Aid Measures =======================
Eyes: IF HOT MAT'L: FLUSH IMMED W/FRESH WATER, HOLDING
EYELIDS OPEN. SEE DR. SKIN: IF HOT MAT'L: QUICKLY COOL IN WATER.
SEE DR FOR EXTENSIVE BURNS. DON'T TRY TO PEEL SOLIDIFIED MAT'L FROM
SKIN OR USE SOLVENTS OR THINNER TO DISSOLVE IT. THEUSE OF
VEGETABLE/MINERAL OIL IS RECOMMENDED FOR REMOVAL. INHAL: IF
SYMPTOMS/SIGNS, MOVE TO FRESH AIR. IF BREATH STOPPED, GIVE
ARTIFICIAL RESPIRATION. CALL DR.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:500+F,260+C
Autoignition Temp:Autoignition Temp Text:600F
Extinguishing Media:FOAM, WATER SPRAY, (FOG), DRY CHEMICAL, CO2.
Fire Fighting Procedures:MINIMUM BREATHING OF VAPORS, GASSES, FUMES OR
DECOMPOSITION PRODUCTS, USE SUPPLIED AIR BREATHING EQUIPMENT FOR
ENCLOSED OR CONFINED SPACES.
Unusual Fire/Explosion Hazard:HEATED ABOVE FLASH POINT, MAT'L WILL
RELEASE FLAMM VAPOR, CAN BURN/BE EXPLOS IN CONFINED SPACES IF
IGNITED. DON'T MIX W/STRONG OXIDANTS (LIQ CHLORINE/OXYGEN).
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCES. RECOVER FREE
PRODUCT. ADD SAND, EARTH OR OTHER SUITABLE ABSORBENT TO SPILL AREA.
LET COOL. SCRAPE UP INTO SUITABLE CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID OPEN FLAMES, HEALTH STUDIES HAVE
SHOWN THAT MANY PETROLEUM HYDROCARBONS POSE POTENTIAL HUMAN HEALTH
RISKS WHICH MAY VARY FROM PERSON TO PERSON.
Other Precautions:MINIMIZE BREATHING VAPOR MIST AND FUMES. AVOID
PROLONGED AND REPEATED CONTACT WITH SKIN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE SUPPLIED AIR RESPIRATOR IN CONFINED AREAS OR
WHEN VAPORS EXCEED TLV LIMITS.
Ventilation:LOCAL EXHAUST: IN ENCLOSED AREAS. MECHANICAL (GENERAL): IN
ENCLOSED AREAS.
Other Protective Equipment:BRIEF OR INTERMITTENT SKIN CONTACT WITH THIS
ASPHALT PRODUCT IS NOT EXPECTED TO PRODUCE ANY SERIOUS EFFECTS.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:650+F,343+C
Melt/Freeze Pt:M.P/F.P Text:235 TO 245F
Decomp Temp:Decomp Text:600F,316C
Vapor Pres:<0.1 @ 20C
Vapor Density:>5
Spec Gravity:1.0 (WATER=1)
Viscosity:2700 CPS *
Evaporation Rate & Reference:<0.01 @ 77F (TOLUENE=1)
Solubility in Water:<0.1 @ 25 C
Appearance and Odor:SOLID AT ROOM TEMPERATURE, BLACK, WAXY, DULL; NO
ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:DO NOT OVERHEAT, AUTOIGNITION MAY OCCUR IF
HEATED BEYOND 600 F.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF SULFUR & NITROGEN ARE POSSIBLE UNDER EXTREME UNCONTROLLED
FIRE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|