===================== Product Identification =====================
MSDS NAME:CADVERT 375 SECONDARY PLATING ADDITIVE
NIIN:00N003423
MSDS Number: BCJYM
=== Responsible Party ===
Company:MACDERMID, INC
Emergency Phone Num:203-575-5700
CAGE:13501
=== Contractor Identification ===
Company:MACDERMID INC
Address:50 BROOKSIDE RD
Box:671
City:WATERBURY
State:CT
ZIP:06720
Country:US
Phone:203-575-5700
CAGE:76071
Company:MACDERMID, INC
Address:526 HUNTINGTON AVE
Box:City:WATERBURY
State:CT
ZIP:06702
Country:US
Phone:203-575-5700
CAGE:13501
============= Composition/Information on Ingredients =============
Name:2-ETHOXYETHANOL (EGEE) (SARA III)
CAS:110-80-5
RTECS #:KK8050000
OSHA PEL:S,200 PPM
ACGIH TLV:S, 5 PPM; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:LIQ CAUSE SKIN IRRIT & CAN ABSORB THROUGH SKIN.
INHAL OF VAP CAUSE NOSE & THROAT IRRIT.SEE SUPP DATA
======================= First Aid Measures =======================
Eyes: FLUSH IMMEDIATELY WITH WATER FOR 15 MIN. CALL MD. SKIN:
WASH WITH SOAP & WATER. INHALATION: PROVIDE FRESH AIR.
===================== Fire Fighting Measures =====================
Flash Point:145F; 63C, CC
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:NEUTRALIZE SPILL WITH BICARBONATE, SODA ASH OR
SIMILIAR ALKALI. VACUUM OR MOP UP SPILL. RINSE RESIDUES WITH WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT & SOURCES OF
IGNITION. KEEP AWAY FROM FOOD STUFFS. WASH THOROUGHLY AFTER
HANDLING.
Other Precautions:USE ONLY IN WELL VENTILATED AREAS WITH SUFFICIENT AIR
MOVEMENT TO MAINTAIN AIRBORNE CONCENTRATION LEVELS BELOW TLV. AVOID
PROLONGED OR REPEATED EYE & SKIN CONTACT. DO NOT BREATHE VAPORS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPRVD HALF-FACE-PIECE
CARTRIDGE,AIR PURIFYING RESP.
Ventilation:LOCAL EXHAUST RECOMMENDED TO KEEP BELOW TLV.
Protective Gloves:RUBBER,NEOPRENE
Eye Protection:CHEMICAL GOG/FACE SHIELD
Other Protective Equipment:IMPERVIOUS CLOTHES & FOOTWEAR.
Supplemental Safety and Health
PH- 2.2. OVEREXPOSURE: LIQ CAN CAUSE SEVERE EYE IRRITATION & MAY CAUSE
PERMANENT EYE DAMAGE. VAPORS MAY CAUSE EYE IRRITATION. PREVIOUSLY
MANUFACTURED BY 3M CO.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:198F; 92C
Spec Gravity:1.009
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR YELLOWISH LIQUID WITH A PUNGENT ODOR
Percent Volatiles by Volume:88.6
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
==================== Disposal Considerations ====================
Waste Disposal Methods:MANUFACTURER RECOMMENDS DILUTION. NEUTRALIZED
PRODUCT MAY BLEND INTO A WASTE WATER TREATMENT SYSTEM. DISPOSAL
METHODS MUST BE IAW FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|