Spill Release Procedures:SWEEP OR SCOOP UP AND REMOVE
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE NEAR COMBUSTIBLES. FINE
POWDERS MAY DEVELOP ELECTROSTATIC CHARGES. KEEP FROM IGNITION
SOURCES.
Other Precautions:MFR STATES KYNAR POWDER AND PELLETS TO BE RELATIVELY
NON-TOXIC IN THE POLYMERIC STATE; THE THERMAL DECOMP PROD,HYDROGEN
FLUORIDE,MUST BE CONSIDERED TOXIC AND CORROSIVE. TLV FOR HF IS
3PPM.
Respiratory Protection:MFR RECOMNDS NIOSH/MSHA APPRVD DUST MASK FOR
POWDER, USE SCBA FOR HF
Ventilation:VENT VAP FROM MELT PROCESSING EQUIP AWAY FROM PERSONNEL.
Protective Gloves:INSULATED
Eye Protection:GOGGLES
Supplemental Safety and Health
INGREDIENTS: W/OR W/O PIGMENTS & FILLERS. OVEREXPOS: POSS
COMDLICATIONS- EDEMA OF LUNGS,BRONCHIAL PNEUMONIA MAY BE DELAYED
REACTIONS. MP IS 312-334F.
Waste Disposal Methods:MFR RECOMMENDS NOT TO INCINERATE WITHOUR
PROVISION FOR ABSORBING HF. KYNAR THAT IS NOT CONTAMINATED W/ A
HAZARDOUS SUBSTANCE CAN BE DISPOSED OF IN AN APPROVED LANDFILL.
DISPOSAL METHOD. MUST BE IAW FE DERAL, STATE AND LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.