===================== Product Identification =====================
MSDS NAME:CS 240 FIRESTOP SEALANT
NIIN:00D002876
MSDS Number: BPFNP
=== Responsible Party ===
Company:HILTI INC.
Address:5400 S. 122ND STREET
City:TULSA
State:OK
ZIP:74146
Country:US
Info Phone Num:918-252-6000
Emergency Phone Num:918-252-6000 OR 800-727-3427
CAGE:EO176
=== Contractor Identification ===
Company:HILTI INC
Address:5400 S 122ND E AVE
Box:21148
City:TULSA
State:OK
ZIP:74121
Country:US
Phone:918-252-6000/800--879-6000
CAGE:11239
Company:HILTI INC.
Address:5400 S. 122ND STREET
City:TULSA
State:OK
ZIP:74146
Country:US
Phone:918-252-6000
CAGE:EO176
============= Composition/Information on Ingredients =============
Name:DIMETHYLFORMAMIDE (EXPERIMENTAL TERRATOGEN PER MFR)
CAS:68-12-2
RTECS #:LQ2100000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:S, 10 PPM
ACGIH TLV:S, 10 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:CALCIUM CARBONATE
CAS:471-34-1
RTECS #:FF9335000
Other REC Limits:NONE RECOMMENDED
Name:POLYDIMETHYLSILOXANE
CAS:70131-67-8
Other REC Limits:NONE RECOMMENDED
Name:DIMETHYL METHYLDIETHYL N-HYDROXYETHAMINE SILICONE
CAS:68952-53-4
Other REC Limits:NONE RECOMMENDED
Name:METHYLVINYL BIS-(N-METHYLACETAMIDO) SILANE (EXPERIMENTAL
TERATOGEN PER MFR)
CAS:50791-87-2
Other REC Limits:NONE RECOMMENDED
Name:ACETAMIDO-SILANE
Other REC Limits:NONE RECOMMENDED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:UNCURED PRODUCT AND ITS VAPORS MAY
CAUSE EYE AND SKIN IRRITATION. FULLY CURED MATERIAL IS
NON-HAZARDOUS. TOXICOLOGY STUDIES INDICATE THAT 2 OF THE
INGEREDIENTS ARE CAPEABLE OF EMBRIOLETHAL AND/OR TERA TOGENIC
EFFECTS. LOW LEVALS HAVE NOT PROVEN TO BE ADVERSE TO HUMAN HEALTH.
DO NOT EXPOSE PREGNANT PEOPLE. SEE INGREDS.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYE:POSSIBLE IRRITATION (ITCHING, DRYNESS,
REDNESS). SKIN:NO EFFECT EXPECTED. POSSIBLE IRRITATION WITH
PROLONGED/REPEATED CONTACT. INHALED:CAN CAUSE SLIGHT RESPIRATORY
IRRITTION. INGESTED:UNLIKELY. NO INFORMATION GIVEN ON MSDS BY
SUPPLIER.
Medical Cond Aggravated by Exposure:SOME PRE-EXISTING SKIN, EYE OR
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH WATER FOR 15 MINUTES. GET MEDICAL ATTENTION
IF ILL EFFECTS OCCUR. SKIN: WIPE OFF MATERIAL AND WASH WITH SOAP &
WATER. INHALED:REMOVE TO FRESH AIR IF DISCOMFORT OCCURS. INGESTION:
GET M EDICAL ATTENTION IF LARGE AMOUNTS ARE SWALLOWED. REFERAL TO
A PHYSICIAN IS RECOMMENDED IF THERE IS ANY QUESTION ABOUT THE
SERIOUSNESS OF THE INJURY OR EXPOSURE.
===================== Fire Fighting Measures =====================
Flash Point:>250F,>121C
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.
================== Accidental Release Measures ==================
Spill Release Procedures:ALLOW TO CURE, THEN SCRAPE UP AND PLACE IN
CONTAINER FOR DISPOSAL.
Neutralizing Agent:NO INFORMATION GIVEN ON MSDS BY SUPPLIER
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IBELOW 90F.
Other Precautions:PRODUCT CURES ON EXPOSURE TO AIR. WASH HANDS AFTER
USING AND BEFORE MEALS. DO NOT EXPOSE PREGNANT INDIVIDUALS TO
CURING PROCESS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:RESPIRATORY PROTECTION WILL NOT NORMALLY BE
REQUIRED. IF VENTILATION DOES NOT MAINTAIN INHALATION EXPOSURES
BELOW PEL(TLV), USE NIOSH/MSHA APPROVED RESPIRATORS FOR ORGANIC
VAPORS AS PER CURRENT 29 CFR 1910.134, INSTRUCTIONS/WARNINGS.
Ventilation:GENERAL (NATURAL OR INDUCED AIR MOVEMENT WHICH THAT
MAINTAIN VAPOR CONCENTRATIONS BELOW PEL/TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/SIDE SHIELD RECOMMENDED
Other Protective Equipment:NO FURTHER EQUIPMENT MENTIONED ON MSDS.
Work Hygienic Practices:HMIS:USE GOOD INDUSTRIAL HYGIENE PRACTICE.
MFR:WASH AFTER USING THE PRODUCT AND BEFORE EATING, DRINKING, ETC.
Supplemental Safety and Health
NONE
================== Physical/Chemical Properties ==================
HCC:N1
Vapor Pres:<5 MM
Vapor Density:>1
Spec Gravity:1.48
Evaporation Rate & Reference:"NOT APPLICABLE"
Solubility in Water:<0.1%
Appearance and Odor:BLACK PASTE-LIKE MATERIAL, SLIGHT ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
MOISTURE AND/OR AIR (WILL CAUSE THE MATERIAL TO CURE)
Stability Condition to Avoid:TEMPERATURES ABOVE 90F.
Hazardous Decomposition Products:METAL OXIDES, NITROGEN OXIDES,
SILICONE DIOXIDE, CARBONDIOXIDE, AND TRACES OF INCOMPLETELY BURNED
CARBON PRODUCTS
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:MANUFACTURER STATES, "NOT CLASSIFIED AS AN EPA
HAZARDOUS WASTE." DISPOSE OF I/A/W FEDERAL,STATE,LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SILICA GEL
| 63231-67-4 |
|
HELIUM
| |
|
SCRUBBER SOLUTION A
| 7664-41-7 |
|
SCRUBBER SOLUTION B
| |
|
ETHYL ALCOHOL
| 64-17-5 |
|
BATTERIES, WET, FILLED W/ALKALI, UN2795, 8, PG III
| 1310-58-3
7440-43-9
7440-02-0
7440-48-4 |
|
RINSE DRY
| |
|
810007, ROSS REFERENCE ELECTRODE FILLING SO
| 7447-40-7
7732-18-5 |
|
75-1626-847,DEVELOPER (DV-10) FOR KYOCERA(S
| 9003-07-0
1333-86-4
60676-50-0
1309-37-1
1314-13-2
68186-94-7 |
|
101B-NS
| 1344-28-1
13463-67-7
112945-52-5
1309-37-1 |
|
JET A-1
| |
|
JP-4
| 8008-20-6
64742-73-0 |
|
JET FUEL,JP-4
| 71-43-2
1330-20-7 |
|
JP-4
| 64742-48-9
64741-46-4
71-43-2 |
|
MILITARY AVIATION TURBINE FUEL JP-4
| 71-43-2
64741-41-9
64742-38-7
64742-89-8
64742-47-8
64742-81-0
95-63-6
110-54-3 |
|
RLB-12/14 OR A3-03-0167
| 1313-13-9
13530-65-9
1309-48-4 |
|
MC8001-10 SILICONE FLUID 31 CS
| 63148-62-9 |
|
ROYCO 885 A
| 103-24-2
82446-58-0
128-37-0 |
|
50% CAUSTIC SODA-RAYON GRADE
| 1310-73-2
7732-18-5 |
|
CAUSTIC SODA LIQUID, 50%
| 1310-73-2
7732-18-5 |
|
50% CAUSTIC SODA-DB
| 1310-73-2
7732-18-5 |
|
6040, ECP-PROCESS BLACK TYPE H TYPE V80 TON
| 64742-48-9 |
|
KLENZYME,1673
| 9014-01-1
1303-96-4
7732-18-5 |
|
CHEVRON UNIVERSAL GEAR LUBRICANT SAE 80W-90
| 9003-27-4 |
|
AMOCO MULTI-PURPOSE GEAR LUBRICANT 80W-90
| 64741-88-4
64742-01-4 |
|
CITGO PREMIUM GEAR OIL (MP) 80W-90; 31-310
| 64741-88-4 |
|
ABLEBOND 926-1
| 98-00-0
8052-41-3
13530-65-9 |
|
SCE-2
| 7647-14-5
7791-13-1
333-20-0 |
|
CONGO RED; CATALOG NO. C58025
| 573-58-0 |
|
CHLOROFORM; PRODUCT CODE 9182; C2915-02
| 67-66-3 |
|
ABLEBOND 163-4 & 163-4 LVFF PART B
| 108-95-2
112-24-3
8006-64-2 |
|
ABLEBOND 163-4 & 163-4 LVFF PART C
| 7440-50-8 |
|
5055, ALL PURPOSE CLEANER
| 110-54-3
68476-86-8 |
|
NO SCRATCH
| 71-55-6
8006-64-2
8012-95-1 |
|
ENERGIZER
| 1313-13-9
7439-97-6
21908-53-2
1310-73-2
1310-58-3
7440-66-6 |
|
TONER FOR CLASS II AND CLASS III (BLACK)
| 26655-10-7
25213-39-2
1333-86-4
84179-66-8
109125-50-0
109125-51-1 |
|
807526-18,PART A
| 1314-41-6 |
|
807526-18,PART B
| 7440-44-0
14808-60-7
1309-37-1
60676-86-0 |
|
807526-18,PART C
| |
|
74010 EPOXY RESIN SOLUTION
| 108-88-3
71-36-3
107-98-2
108-10-1
1330-20-7
111-40-0 |
|
PERCHLOROETHYLENE SVG
| 127-18-4
7665-72-7 |
|
CS 240 FIRESTOP SEALANT
| 68-12-2
471-34-1
70131-67-8
68952-53-4
50791-87-2 |
|
SPRAYMIST COOLANT, SM-81/82/83
| 64742-52-5
111-42-2 |
|
EPOXY TILE (BASE), EPOXY TILE HI-BUILD/PRIM
| 108-88-3
78-93-3
1330-20-7 |
|
EPOXY TILE ACTIVATOR,EPOXY TILE HI-BUILD/PR
| 1330-20-7
108-10-1
67-63-0 |
|
CLOROSOL
| 71-55-6 |
|
CEE-BEE SILICONE REMOVER C-105HF
| 64742-94-5
75-09-2
108-88-3
68584-22-5 |
|
STP OIL TREATMENT
| 19210-06-1
68783-96-0 |
|
AMOCO MULTI-PURPOSE GEAR LUBRICANT NO. 80W-
| 64741-88-4
64742-01-4 |
|
885A
| 25619-56-1
128-37-0 |
|
|