===================== Product Identification =====================
MSDS NAME:6201, ALCAN ALUMINUM METAL 6XXX SERIES ALLO
NIIN:00N032184
MSDS Number: BPKGK
=== Responsible Party ===
Company:ALCAN ALUMINUM CORP
Address:100 ERIEVIEW PLAZA
City:CLEVELAND
State:OH
ZIP:44114
Country:US
Info Phone Num:216-523-6800; 502-521-7811
Emergency Phone Num:315-349-0121; 812-466-2241
CAGE:01371
=== Contractor Identification ===
Company:ALCAN ALUMINUM CORP
Address:100 ERIEVIEW PLAZA
City:CLEVELAND
State:OH
ZIP:44114
Country:US
Phone:216-523-8230
CAGE:01371
============= Composition/Information on Ingredients =============
Name:ALUMINUM (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: >97.3%
OSHA PEL:15MG/M3 TDUST;5 FUME
ACGIH TLV:10MG/M3 DUST;5 FUME
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 0.5-0.9%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:IRON (PEL/TLV AS IRON OXIDE FUME)
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 0.5%
OSHA PEL:10 (FE) MG/M3
ACGIH TLV:5 (FE) MG/M3
Name:COPPER (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0.1%
OSHA PEL:0.1MG/M3 FUME;1 DUST
ACGIH TLV:0.2MG/M3 FUME;1 DUST
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:MAGNESIUM (PEL/TLV AS MAGNESIUM OXIDE FUME)
CAS:7439-95-4
RTECS #:OM2100000
Fraction by Wt: 0.6-0.9%
OSHA PEL:10 MG/M3
ACGIH TLV:10 MG/M3
Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 0.03%
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293
Name:ZINC (PEL/TLV AS ZINC OXIDE) (SARA III)
CAS:7440-66-6
RTECS #:ZG8600000
Fraction by Wt: 0.1%
OSHA PEL:10MG/M3 TDUST;5 FUME
ACGIH TLV:10MG/M3 TDUST;5 FUME
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:CHROMIUM (PEL/TLV AS METAL) (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 0.03%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:EFTS OF OVEREXP: HIGH CONC OF COPPER DUST MAY CAUSE IRRIT
OF MUC MEMB & PHARYNX, & HEAVY CONC OF MANGANESE DUST (ING 10)
RTECS #:9999999ZZ
Name:ING 9: MAY AFFECT CNS. MIG WELDING/PLASMA ARC CUTTING OF AL
ALLOYS CAN GENERATE OZONE, NITRIC OXIDES, AND (ING 11)
RTECS #:9999999ZZ
Name:ING 10: ULTRAVIOLET RADIATION. OZONE OVEREXPOSURE MAY RSLT
IN MUC MEMB IRRIT, AS WELL AS OTHER PULMONARY DISCOMFORTS.
RTECS #:9999999ZZ
Name:OTHER PREC: ALUMINUM" FROM THE ALUMINUM ASSOC., 818
CONNECTICUT AVE., N.W., WASHINGTON, D.C. 20006.
RTECS #:9999999ZZ
Name:VENT: MAY BE REQUIRED. SEE NFPA CODES NFPA 65 AND 651.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: AL DUSTS ARE CONSIDERED
NUISANCE PARTICULATES, WHICH HAVE LITTLE ADVERSE EFT ON LUNGS & DO
NOT PRDCE SIGNIFICANT ORGANIC DISEASE/ TOX EFTS WHEN EXPOS ARE KEPT
UNDER REASONABLE CTL. AL FUMES GEN ERATED IN MELTING/WELDING ARE
CONSIDERED TO BE LOW HLTH RISK. DUE TO LOW CONC OF OTHER LISTED
INGREDS (EFT OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: THEIR PRESENCE IS LESS LIKELY TO
CAUSE HLTH CONCERN. EYE CONT: AL DUST MAY CAUSE ABRASIONS. SKIN
CONT/ INGEST: NOT APPLICABLE. SILICON DUSTS ARE CONSIDERED NUISANCE
PARTICULATES. HEAVY CONC OF FRESHLY FORMED FUMES OF OXIDES OF
COPPER, MAGNESIUM, MANGANESE, & ZINC CAN PRDCE SYMP OF METAL FUME
FEVER. (ING 9)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHAL: MOVE TO VENTILATED AREA. IF DISCOMFORT PERSISTS, SEEK
MEDICAL ATTENTION. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL
MD . EYES: FLUSH WITH WATER FOR A MINIMUM OF 15 MINUTES, AND IF IR
RITATION PERSISTS, SEEK MEDICAL ATTENTION. INGEST: CALL MD
IMMEDIATELY .
===================== Fire Fighting Measures =====================
Extinguishing Media:USE A CLASS D DRY POWDER EXTINGUISHER OR DRY SAND.
DO NOT USE WATER OR HALOGENATED EXTINGUISHING MEDIA.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER OR HALOGENATED
EXTINGUISHING MEDIA.
Unusual Fire/Explosion Hazard:NOT A FIRE HAZARD EXCEPT IN FINELY
DIVIDED FORM. MOLTEN AL MAY EXPLODE UPON CONT W/H2O. FINELY DIVIDED
AL MAY EXPLODE WHEN MIXED W/HALOGEN ACIDS, (SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:NOT APPLICABLE.
Other Precautions:HOT AL DOES NOT EXHIBIT ANY WARNING COLOR CHANGES,
THEREFORE, CAUTION NEEDS TO BE EXERCISED IF THE METAL COULD BE HOT.
HNDLG MOLTEN AL PRESENTS SPECIAL HAZ. FOR MORE INFO ON MOLTEN AL,
REQUEST A COPY OF "GUIDELINES FOR HNDLG MOLTEN (ING 12)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:APPROPRIATE NIOSH/MSHA APPROVED RESPIRATORY
PROTECTION FOR CONCENTRATIONS ABOVE THE EXPOSURE LIMITS.
Ventilation:IF VENT IS TO BE USED TO CONVEY FINELY DIVIDED AL GENERATED
BY GRINDING/SAWING/ETC., SPECIAL VENT PROVISIONS (ING 13)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:MOLTEN METAL HANDLING REQUIRES THE USE OF
BOTH SECONDARY & PRIMARY PERSONAL PROT EQUIP, REFER TO AL ASSOC.'S
GUIDELINES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: HALOGENATED SOLVENTS, OR AMMONIUM NITRATE. FINELY DIVIDED
ALUMINUM REACTS W/HALOGEN ACIDS, WATER, & SODIUM HYDROXIDE TO
PRODUCE HYDROGEN GAS. MATLS TO AVOID: ALUMINUM CAN FORM EXPLOSIVE
MIX TURES W/BROMATES, IODATES, & AMMONIUM NITRATE. FINELY DIVIDED
AL CAN THERMITE IN THE PRESENCE OF CUOX, PBOX, OR FEOX.
================== Physical/Chemical Properties ==================
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>900F,>482C
Spec Gravity:2.5-2.9(H2O=1)
Appearance and Odor:GREY TO SILVERY METALLIC SOLID; NO ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AL CAN GENERATE EXPLOS MIXT OF HYDROGEN IN THE PRESENCE OF HALOGEN
ACIDS OR SODIUM HYDROXIDE. FINELY DIVIDED (SUPP DATA)
Stability Condition to Avoid:ALUMINUM SCRAP MUST BE THOROUGHLY DRIED
PRIOR TO REMELTING.
==================== Disposal Considerations ====================
Waste Disposal Methods:RECYCLE. FINELY DIVIDED ALUMINUM MAY BE REACTIVE
AND ITS HAZARD CHARACTERISTICS SHOULD BE DETERMINED PRIOR TO
DISPOSAL. DISPOSAL MUST COMPLY WITH FEDERAL, STATE OR LOCAL WASTE
DISPOSAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
TONER (PD-003R)
| 1317-61-9
9002-88-4
24937-78-8
1333-86-4 |
|
SLIP-X 301
| 107-21-1
1302-78-9 |
|
7064, DRD
| 64742-48-9
2807-30-9
111-76-2 |
|
XEROX XT-90 DRY INK
| 1309-37-1
1333-86-4 |
|
RE-FRESH
| |
|
900, ACRYLIC PATIO/DECK WHITE
| 57-55-6
25265-77-4 |
|
BLACK STRAP MOLASSES
| |
|
A-101 SERIES, BAYFERROX RED
| 1309-37-1 |
|
LIQUID ARGON
| 7440-37-1 |
|
SPEEDFEED DRILLS
| 7440-33-7
7440-48-4
7440-25-7
12012-35-0 |
|
12120, BRUSHING THINNER
| 64742-88-7 |
|
300 SERIES WALL BASE
| |
|
5278, G-G ACRYLIC EPOXY CURING AGENT COMP B
| 9016-45-9
112-34-5
7732-18-5
25068-38-6
57-55-6 |
|
66, CLEANER & DEGLOSSER
| 67-63-0
64742-47-8
64742-89-8
107-98-2
67-64-1
64742-95-6
71-43-2
25551-13-7 |
|
ZIP AEROSOL D-5625 CONTACT CLEANER
| 76-13-1
75-71-8 |
|
ZIP AEROSOL S-100 MOLD RELEASE
| 75-71-8
75-69-4
63148-62-9 |
|
710210, CA-40 FL
| 65996-93-2
1317-36-8 |
|
100981, 7951 RED
| 1309-64-4
63449-39-8
107-21-1 |
|
5504, INT/EXT THOUGHSHEEN S/G DEEP B LATEX
| 57-55-6
25265-77-4
7664-41-7
64742-47-8 |
|
307-767, ISO PUMP OIL
| |
|
5457, ALCAN ALUMINUM METAL 5XXX SERIES ALLO
| 7439-95-4
7439-96-5
7429-90-5 |
|
5557, ALCAN ALUMINUM METAL 5XXX SERIES ALLO
| 7429-90-5
7439-95-4
7439-96-5 |
|
5657, ALCAN ALUMINUM METAL 5XXX SERIES ALLO
| 7439-95-4
7439-96-5
7429-90-5 |
|
6101, ALCAN ALUMINUM METAL 6XXX SERIES ALLO
| 7429-90-5
7440-21-3
7439-89-6
7440-50-8
7439-95-4
7439-96-5
7440-66-6
7440-47-3 |
|
6201, ALCAN ALUMINUM METAL 6XXX SERIES ALLO
| 7429-90-5
7440-21-3
7439-89-6
7440-50-8
7439-95-4
7439-96-5
7440-66-6
7440-47-3 |
|
6301, ALCAN ALUMINUM METAL 6XXX SERIES ALLO
| 7439-95-4
7439-96-5
7440-66-6
7440-47-3
7429-90-5
7440-21-3
7439-89-6
7440-50-8 |
|
6003, ALCAN ALUMINUM METAL 6XXX SERIES ALLO
| 7429-90-5
7440-21-3
7439-89-6
7440-50-8
7439-95-4
7439-96-5
7440-66-6
7440-47-3 |
|
6004, ALCAN ALUMINUM METAL 6XXX SERIES ALLO
| 7429-90-5
7440-21-3
7439-89-6
7440-50-8
7439-95-4
7439-96-5
7440-66-6 |
|
8006, ALCAN ALUMINUM METAL 8XXX SERIES ALLO
| 7429-90-5
7439-89-6
7439-96-5
7440-66-6 |
|
8007, ALCAN ALUMINUM METAL 8XXX SERIES ALLO
| 7429-90-5
7439-89-6
7439-96-5
7440-66-6 |
|
8030, ALCAN ALUMINUM METAL 8XXX SERIES ALLO
| 7429-90-5
7439-89-6
7439-96-5
7440-66-6 |
|
R7 K 27, OPEX LACQUER RETARDER THINNER
| 78-83-1
111-76-2
110-43-0
64742-48-9
64742-47-8
108-88-3
1330-20-7 |
|
NC-CONCENTRATE CLEANER
| 111-90-0 |
|
HEAVY DUTY CHOWHOUND CHARLIE CPVC SOLVENT C
| 109-99-9
108-94-1 |
|
CHOWHOUND CHARLIE CPVC SOLVENT CEMENT
| 109-99-9
108-94-1 |
|
BIG BILL PVC PRIMER/CLEANER
| 78-93-3
109-99-9 |
|
F-173 WONDERSEAL BLOCK BOND
| 8052-42-4
7732-18-5
8002-05-9 |
|
GLASS BONDED MICA (CERAMOPLASTIC)
| |
|
2541 FEEDWATER TREATMENT
| 1310-73-2
302-01-2
18662-53-8 |
|
01701, ANODES MAGNESIUM EXTRUSIONS DC 983 F
| 7429-90-5
7439-96-5
7440-66-6
7439-95-4 |
|
BATTERY
| 7439-92-1 |
|
TONER FOR LP 4150/4081 (BLACK)
| 25213-39-2
1317-61-9 |
|
LIQUIFIED PETROLEUM GAS W/METHYL ACETYLENE-
| 74-99-7
68476-85-7 |
|
BLUE STENCIL CORRECTION FLUID 700
| 110-80-5 |
|
CPS233839, METALWORKING FLUID GRADE 11D
| 24937-78-8
64742-55-8 |
|
ACRYLIC BONDCRETE
| 109-86-4 |
|
TETRAGLAS-T
| |
|
GREEN SATIN GLOVE BORAX POWDERED HAND SOAP
| |
|
STEEL FOUNDRY PRODUCTS
| 7439-89-6
7440-47-3
7439-96-5
7440-02-0
7439-98-7
7440-21-3
7440-44-0 |
|
17-4 PRECIPITATION HARDENING STAINLESS STEE
| 7440-02-0
7439-98-7
7439-89-6
7440-50-8
7440-03-1
7440-25-7
1333-86-4
7439-96-5
7440-21-3
7440-47-3 |
|
|