===================== Product Identification =====================
MSDS NAME:BONUTITE WHITE DIAMOND BODY FILLER
NIIN:00N035877
MSDS Number: BQLKW
=== Responsible Party ===
Company:OATEY CO
Address:4700 WEST 160TH ST
Box:35906
City:CLEVELAND
State:OH
ZIP:44135
Country:US
Info Phone Num:216-267-7100
Emergency Phone Num:303-623-5716
Preparer's Name:PAUL E. NATON
CAGE:53472
=== Contractor Identification ===
Company:OATEY CO
Address:4700 WEST 160TH STREET
Box:35906
City:CLEVELAND
State:OH
ZIP:44135
Country:US
Phone:216-267-7100/303-623-5716
CAGE:53472
============= Composition/Information on Ingredients =============
Name:STYRENE, MONOMER (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 11-15%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:POLYESTER RESIN
CAS:25464-21-5
Fraction by Wt: 29-34%
Name:TALC (POWDER), CONTAINING NO ASBESTOS
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 52-58%
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST
Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:10483-67-7
RTECS #:XR2275000
Fraction by Wt: <1%
OSHA PEL:10 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL: MAY CAUSE IRRIT TO MUC MEMB,
RESP SYS, NOSE, EYES AND THROAT, INCR NASAL MUCOUS SECRETION,
METALLIC TASTE, DROW, VERTIGO, SLIGHT MUSCULAR WEAK ACCOMPANIED BY
INERTIA & DEPRESS, NAUS, VOMIT, LOS S OF APPETITE & GEN WEAKNESS.
STYRENE HAS BEEN OBSERVED TO PASS PLACENTA, & SOME NERV SYS DEFECTS
WERE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE: GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ:OBSERVED IN CHILDREN WHOSE MOTHER HAD
BEEN EXPOS TO CHEMS SUCH AS STYRENE DURING PREGNANCY. INGEST:NO
KNOWN RPTS FOUND, BUT MAY RSLT IN SYMP DESCRIBED ABOVE UNDER INHAL.
SKIN: PRLNGD SKIN CON T MAY CAUSE DRYING, CRACKING, ITCHING,
BURNING & SORES. ABSORP IS MOD. EYES; CONT W/EYES MAY CAUSE SEV
ITCHING, (SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHAL:MOVE TO FRESH AIR.IF BRTHG IS DFCLT, GIVE OXYGEN. IF
NOT BRTHG, GIVE ARTF RESP. KEEP VICTIM QUIET & WARM. CALL POIS
CNTRL CNTR/PHYS IMMED. SKIN: FLUSH W/WATER, THEN WASH THORO W/SOAP
& WATER. RE MOVE CONTAMD CLTHG & WASH BEFORE REUSE.CALL POIS CNTRL
CNTR/PHYS IF IRRIT PERSISTS. EYES: FLUSH W/WATER FOR AT LST 15 MINS
& CALL POIS CNTRL CNTR/PHYS IF IRRIT PERSISTS. INGEST: DRINK WATER.
(SUPDAT)
===================== Fire Fighting Measures =====================
Flash Point Method:TOC
Flash Point:156F,69C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:SMALL FIRES: USE DRY CHEM, CARBON DIOXIDE,
WATER/FOAM EXTING. LRG FIRES: EVACUATE AREA AND CALL FIRE
DEPARTMENT IMMED.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA, STOP LEAK IF IT CAN BE DONE
WITHOUT RISK. TAKE UP WITH SAND, EARTH OR OTHER ABSORBING MATERIAL
AND PLACE IN CLEAN, DRY, LEAK-PROOF CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL, DRY AREA. AVOID
EXCESSIVE HEAT. AVOID EYE AND SKIN CONTACT.
Other Precautions:DO NOT STORE IN DIRECT SUNLIGHT OR EXCESSIVE HEAT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR NIOSH/MSHA APPROVED CANISTER OR AIR-PACK
(SELF-CONTAINED AIR SUPPLY).
Ventilation:GENERAL MECHANICAL: USE HOOD TO LOWER TLV AND PEL TO
ACCEPTABLE UNITS. LOCAL EXHAUST: OPEN DOORS AND WINDOWS.
Protective Gloves:RUBBER OR POLYETHYLENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOLATILES: 17.5 +/- 1.0. EFFECTS OF OVEREXPOSURE: TEARING AND
POSSIBLE OCULAR DAMAGE. VAPORS MAY BE IRRITATING. FIRST AID
PROCEDURES: DO NOT INDUCE VOMITING. CALL POISON CONTROL CENTER OR
PHYSICIAN IMMEDIATELY. AVOID ALCOHOLIC BEVERAGES.NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
================== Physical/Chemical Properties ==================
HCC:V4
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:5.2 @ 25C
Vapor Density:3.6
Spec Gravity:1.09 +/- 0.01
Solubility in Water:INSOLUBLE
Appearance and Odor:BEIGE/WHITE PASTE, SWEET, ACRID ODOR.
Percent Volatiles by Volume:SUPDAT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ORGANIC PEROXIDES.
Stability Condition to Avoid:EXCESSIVE HEAT, OPEN FLAME OR SPARKS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, LOW
MOLECULAR WEIGHT HYDROCARBONS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
LAPPING VEHICLES (A), DP-704
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
LAPPING VEHICLES (A), DP-706
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
LAPPING VEHICLES (A), DP-708
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
DERUSTO C-H-64 BARBEQUE BLACK ENAMEL
| 1333-86-4
111-76-2
67-63-0
30136-13-1
7732-18-5 |
|
NORFOX 92% GRANULES, 1009
| |
|
KEROSENE DEODORIZED
| 64742-96-7 |
|
Q.D. ENAMEL SUPER WHITE, 290100
| 8052-41-3 |
|
POLYESTER RESIN 1070-5, 75157201
| 100-42-5 |
|
BLUE THUNDER FLOOR FINISH, 105890
| 78-51-3
111-77-3
7732-18-5 |
|
PRO TEK TOUGH COAT CATALYZED EPOXY ENAMEL (
| 64742-47-8
1330-20-7
64742-95-6
111-76-2
107-21-1
14807-96-6
13463-67-7 |
|
CAL PWB86 REV WHITE TINTABLE LATEX, CAL3
| 107-21-1
7664-41-7
64742-47-8 |
|
PAINT, 85
| 67-56-1
75-09-2
64742-94-5 |
|
SB BONDING AGENT
| 50-00-0
50-00-0 |
|
PASTE-FLAT, 110595
| 14807-96-6
14808-60-7
112926-00-8
108-65-6 |
|
TEF-LEX, 5063
| 71-55-6 |
|
ACETAL SHAPES, ACE
| |
|
SPACKLING PASTE
| 1317-65-3
7732-18-5
12001-26-2
14807-96-6
9003-20-7
1332-58-7
9004-62-0 |
|
INGERSOLL-RAND DSL-125
| |
|
NUTS N BOLTS 427
| 128-44-9
80-15-9 |
|
LEAD FREE PLUMBING SOLDER
| 7440-31-5
7440-22-4
7440-36-0
7440-50-8 |
|
OXFORD KLEEN BRAKE, 07009
| 71-55-6
124-38-9
67-63-0 |
|
OXFORD LIFT, 07502
| 111-76-2
6834-92-0
7732-18-5
7758-29-4
25155-30-0 |
|
GREEN WELDABLE PRIMER, X-6468
| 1330-20-7
108-88-3
8032-32-4
64742-89-8
100-41-4 |
|
ENPLATE PC-237, 3216
| 7732-18-5
7647-01-0 |
|
C*14-C*16 NORMAL PARAFFINS
| |
|
M.E.K. KLEAN STRIP, GME71
| 78-93-3 |
|
HEAT STOP
| 14464-46-1
1302-78-9
1344-28-1 |
|
OPTICLEAN POLYMER 60.118 (FORMERLY 60.120)
| 64-17-5
141-78-6 |
|
BONUTITE WHITE DIAMOND BODY FILLER
| 100-42-5
25464-21-5
14807-96-6
10483-67-7 |
|
CHEMOLA DRY TFE LUBE 910
| 71-55-6
74-98-6
106-97-8 |
|
SIL-X GREASE NLGI 1, CPS255779
| 112945-52-5 |
|
PR-868, PART A
| 26447-40-5
9016-87-9
61788-32-7
69102-90-5 |
|
PR-868, PART B
| 25791-96-2
8001-79-4
25190-06-1
69102-90-5 |
|
NUZ; WHITE VITRIOL; ZINC SULFATE; ZINC (SUP
| 7733-02-0 |
|
STARTING FLUID
| 60-29-7
106-97-8 |
|
BOUNCE BACK
| 111-90-0 |
|
F-20 DARK GRAY 26008, 820S2968
| 1314-13-2
63148-69-6
112945-52-5
1344-37-2
14807-96-6
8052-41-3
64742-89-8
13463-67-7 |
|
SF-730NT1 BLACK TONER
| 1333-86-4 |
|
LOW VISCOSITY MINERAL OIL, DROMUS OIL B
| |
|
TOWLINE ROCKET
| 1332-37-2
7790-98-9
7440-42-8
10022-31-8 |
|
ROCK DRILL OIL VISTAC ISO 32, CPS232500
| 63449-39-8
64742-98-6 |
|
ALKYD Q.D. MEDIUM GLOSS ENAMEL, 37
| 64742-47-8 |
|
SELECTRON RHODIUM HB SOLUTION, SPS 5805
| 7440-16-6
7664-93-9
7732-18-5 |
|
SURF-KOTE A-1625 AEROSOL
| 1317-33-5
7782-42-5
108-88-3
64-17-5
64742-14-9
75-09-2
68476-86-8 |
|
HOT PRESSED CERAMIC GRADE TBH
| 1344-28-1
1314-23-4
1314-36-9 |
|
1920 DEFOMER
| |
|
WELDWOOD FLOOR TILE CEMENT (3081)
| 64742-11-6
8052-41-3
9016-45-9 |
|
TURBINE OIL GST ISO 32, CPS253026
| |
|
SOLDER ALLOYS CONTAINING LEAD
| 7439-92-1
7440-31-5
7440-22-4
7440-69-9
7440-36-0
7440-50-8
7440-74-6 |
|
NORTHERN HYDRAULICS SAE 30 COMPRESSOR OIL,
| 64742-65-0
64742-62-7 |
|
|