===================== Product Identification =====================
MSDS NAME:GREEN WELDABLE PRIMER, X-6468
NIIN:00N035869
MSDS Number: BQLKN
=== Responsible Party ===
Company:FARWEST PAINT MANUFACTURING CO
Address:4522 SOUTH 133RD ST
City:TUKWILA
State:WA
ZIP:98168
Country:US
Info Phone Num:206-244-8844
Emergency Phone Num:206-941-1619
CAGE:2F266
=== Contractor Identification ===
Company:FARWEST PAINT MANUFACTURING CO
Address:4522 S 133RD ST
City:TUKWILA
State:WA
ZIP:98168
Country:US
Phone:206-244-8844
CAGE:2F266
Company:FARWEST PAINT MANUFACTURING CO
Address:4522 SOUTH 133RD ST
Box:City:TUKWILA
State:WA
ZIP:98168
Country:US
Phone:206-244-8844
CAGE:6F266
============= Composition/Information on Ingredients =============
Name:XYLENE
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 31.57%
OSHA PEL:100 PPM;150 PPM STEL
ACGIH TLV:100 PPM;150 PPM STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:TOLUENE
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 9.23%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:LIGROINE; (MINERAL SPIRITS)
CAS:8032-32-4
RTECS #:OI6180000
Fraction by Wt: 2.24%
OSHA PEL:300 PPM;400 STEL
ACGIH TLV:300 PPM; STEL 400
Name:VM&P NAPHTHA; (MINERAL SPIRITS)
CAS:64742-89-8
Fraction by Wt: 8.03%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:BENZENE, ETHYL-; (PHENYLETHANE)
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: 4.27%
OSHA PEL:100 PPM;125 STEL
ACGIH TLV:100 PPM;125 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: MATL MAY CAUSE IRRIT,
SENSIT/DEFAT OF SKIN UPON PRLNGD/RPTD CONT. INHAL: EXCESS EXPOS TO
VAPS/SPRAY MISTS CAN RSLT IN HDCH, DIZZ, NAUS & LOSS OF
CONSCIOUSNESS. SOME RPTS HAVE ASSOC RPTD & PRLNGD OCCUP OVEREXP TO
SOLV W/PERM BRAIN & NERV SYS DAM. EYES: MATL MAY BE AN IRRITANT.
NOTE: (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: TOLUENE CAS# 108-88-3 APPEARS ON NAVY
LIST OF OCCUP CHEMICAL REPROD HAZ. SEEK CONSULTATION FROM APPROP
HLTH PROFESSIONALS CONCERNING LATEST HAZ LIST INFO & SAFE HNDLG &
EXPOS RECOMM .
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING INSTRUCTIONS.
======================= First Aid Measures =======================
First Aid:SKIN: PROMPTLY WASH WITH SOAP & WATER. REMOVE & WASH ANY
CONTAMINATED CLOTHING BEFORE REUSE. EYES: FLUSH WITH LARGE QTY OF
WATER FOR AT LEAST 15 MIN & SEEK MEDICAL ATTN. INGEST: DO NOT
INDUCE VOMIT, K EEP WARM, QUIET, & GET MED ATTN. ASPIR OF MATL INTO
LUNGS CAN CAUSE CHEM PNEUM WHICH CAN BE FATAL. INHAL: REMOVE TO
FRESH AIR IMMED. IF RESP SYMP DEVELOP, SEEK MED ATTN @ ONCE.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:26.0F,-3.3C
Lower Limits:1%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIP. EVACUATE AREA OF UNPROTECTED PERSONNEL. WEAR PROTECTIVE
CLOTHING.
Unusual Fire/Explosion Hazard:VAPORS MAY FORM AN EXPLOSIVE MIXTURE IN
AIR AND MAY BE IGNITED BY SPARKS, PILOT LIGHTS, ETC. CLOSED
CONTAINERS MAY RUPTURE WHEN EXPOSED TO EXTREME HEAT.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT. VENT AREA. ABSORP
SPILL W/AN ABSORB MATL SUCH AS SAWDUST, VERMICULITE/SAND & PLACE
MATL INTO A CLSD CONTRS. IF LG SPILL, DIKE AREA TO PVNT MATL FROM
ENTERING WATER SYS/SEW ERS. WEAR PROTECTIVE EQUIPMENT DURING
CLEANUP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID PRLNGD/RPTD INHAL OF HEATED
VAPS/SPRAY MISTS. KEEP AWAY FROM HEAT/OPEN FLAME. MATL MAY CAUSE
SENSIT. DO NOT GET IN EYES, ON SKIN/CLTHG.
Other Precautions:DO NOT ALLOW CONTAMINATED CLOTHING TO CONT SKIN. DO
NOT WELD ON FULL/EMPTY CONTAINERS. KEEP CONTAINERS CLOSED WHEN NOT
IN USE & PROPERLY LABELED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:A NIOSH/MSHA APPRVD CANISTER-TYPE RESP MUST BE
WORN TO PVNT INHAL OF VAPS/SPRAY MIST WHEN TLV/PEL IS EXCEEDED.
Ventilation:GEN VENT IS REQD DURING NORM USE. LOC EVENT MAY BE REQD
DURING CERTAIN OPERATIONS TO KEEP EXPOS LEVEL BELOW LIMITS.
Protective Gloves:CHEM RESISTANT/NITRILE, NEOPRENE/RUBBER.
Eye Protection:CHEM WORK GOG W/FULL LGTH FSHLD.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING TO PREVENT SKIN
CONTACT. EYE WASH STATION AND SAFETY SHOWER SHOULD BE AVAILABLE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
WASTE DISP METH: & FEDERAL AGENCY. GROUND HANDLING EQUIP TO PVNT
SPARKS. FOR FURTHER INFO: CONT YOUR ST/LOC WASTE AGENCY OR UNITED
SATES ENVIRONMENTAL PROTECTION AGENCY'S RCRA HOTLINE
(1-800-424-9346 OR 1-202-382-3000).
================== Physical/Chemical Properties ==================
HCC:F3
Boiling Pt:B.P. Text:>205F,>96C
Vapor Pres:53@20C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:GREEN LIQUID W/MILD AROMATIC ODOR.
Percent Volatiles by Volume:70.7
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONT W/STRONG OXIDANTS, ACIDS, BASES & EPOXY HARDENERS UNDER
UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAMES. IF PROD CNTNS
ALUMINUM, MOISTURE IN CLSD CONTRS WILL GENERATE HYDROGEN GAS.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD CARBON
MONOXIDE AND TOXIC VAPORS.
==================== Disposal Considerations ====================
Waste Disposal Methods:IF DISCARDED, MATL & CONTRS SHOULD BE TREATED AS
HAZ WASTED BASED ON CHARACT OF IGNITABILITY AS DEFINED UNDER FED
RCRA REGS (40CFR261), DISP OF MATL/ITS CONTR REQ COMPLIANCE
W/APPLIC LBLG, PKG, & RECO RDKEEPING STD. DISPOSE I/A/W LOC, ST
(SUPP DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
LAPPING VEHICLES (A), DP-704
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
LAPPING VEHICLES (A), DP-706
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
LAPPING VEHICLES (A), DP-708
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
DERUSTO C-H-64 BARBEQUE BLACK ENAMEL
| 1333-86-4
111-76-2
67-63-0
30136-13-1
7732-18-5 |
|
NORFOX 92% GRANULES, 1009
| |
|
KEROSENE DEODORIZED
| 64742-96-7 |
|
Q.D. ENAMEL SUPER WHITE, 290100
| 8052-41-3 |
|
POLYESTER RESIN 1070-5, 75157201
| 100-42-5 |
|
BLUE THUNDER FLOOR FINISH, 105890
| 78-51-3
111-77-3
7732-18-5 |
|
PRO TEK TOUGH COAT CATALYZED EPOXY ENAMEL (
| 64742-47-8
1330-20-7
64742-95-6
111-76-2
107-21-1
14807-96-6
13463-67-7 |
|
CAL PWB86 REV WHITE TINTABLE LATEX, CAL3
| 107-21-1
7664-41-7
64742-47-8 |
|
PAINT, 85
| 67-56-1
75-09-2
64742-94-5 |
|
SB BONDING AGENT
| 50-00-0
50-00-0 |
|
PASTE-FLAT, 110595
| 14807-96-6
14808-60-7
112926-00-8
108-65-6 |
|
TEF-LEX, 5063
| 71-55-6 |
|
ACETAL SHAPES, ACE
| |
|
SPACKLING PASTE
| 1317-65-3
7732-18-5
12001-26-2
14807-96-6
9003-20-7
1332-58-7
9004-62-0 |
|
INGERSOLL-RAND DSL-125
| |
|
NUTS N BOLTS 427
| 128-44-9
80-15-9 |
|
LEAD FREE PLUMBING SOLDER
| 7440-31-5
7440-22-4
7440-36-0
7440-50-8 |
|
OXFORD KLEEN BRAKE, 07009
| 71-55-6
124-38-9
67-63-0 |
|
OXFORD LIFT, 07502
| 111-76-2
6834-92-0
7732-18-5
7758-29-4
25155-30-0 |
|
GREEN WELDABLE PRIMER, X-6468
| 1330-20-7
108-88-3
8032-32-4
64742-89-8
100-41-4 |
|
ENPLATE PC-237, 3216
| 7732-18-5
7647-01-0 |
|
C*14-C*16 NORMAL PARAFFINS
| |
|
M.E.K. KLEAN STRIP, GME71
| 78-93-3 |
|
HEAT STOP
| 14464-46-1
1302-78-9
1344-28-1 |
|
OPTICLEAN POLYMER 60.118 (FORMERLY 60.120)
| 64-17-5
141-78-6 |
|
BONUTITE WHITE DIAMOND BODY FILLER
| 100-42-5
25464-21-5
14807-96-6
10483-67-7 |
|
CHEMOLA DRY TFE LUBE 910
| 71-55-6
74-98-6
106-97-8 |
|
SIL-X GREASE NLGI 1, CPS255779
| 112945-52-5 |
|
PR-868, PART A
| 26447-40-5
9016-87-9
61788-32-7
69102-90-5 |
|
PR-868, PART B
| 25791-96-2
8001-79-4
25190-06-1
69102-90-5 |
|
NUZ; WHITE VITRIOL; ZINC SULFATE; ZINC (SUP
| 7733-02-0 |
|
STARTING FLUID
| 60-29-7
106-97-8 |
|
BOUNCE BACK
| 111-90-0 |
|
F-20 DARK GRAY 26008, 820S2968
| 1314-13-2
63148-69-6
112945-52-5
1344-37-2
14807-96-6
8052-41-3
64742-89-8
13463-67-7 |
|
SF-730NT1 BLACK TONER
| 1333-86-4 |
|
LOW VISCOSITY MINERAL OIL, DROMUS OIL B
| |
|
TOWLINE ROCKET
| 1332-37-2
7790-98-9
7440-42-8
10022-31-8 |
|
ROCK DRILL OIL VISTAC ISO 32, CPS232500
| 63449-39-8
64742-98-6 |
|
ALKYD Q.D. MEDIUM GLOSS ENAMEL, 37
| 64742-47-8 |
|
SELECTRON RHODIUM HB SOLUTION, SPS 5805
| 7440-16-6
7664-93-9
7732-18-5 |
|
SURF-KOTE A-1625 AEROSOL
| 1317-33-5
7782-42-5
108-88-3
64-17-5
64742-14-9
75-09-2
68476-86-8 |
|
HOT PRESSED CERAMIC GRADE TBH
| 1344-28-1
1314-23-4
1314-36-9 |
|
1920 DEFOMER
| |
|
WELDWOOD FLOOR TILE CEMENT (3081)
| 64742-11-6
8052-41-3
9016-45-9 |
|
TURBINE OIL GST ISO 32, CPS253026
| |
|
SOLDER ALLOYS CONTAINING LEAD
| 7439-92-1
7440-31-5
7440-22-4
7440-69-9
7440-36-0
7440-50-8
7440-74-6 |
|
NORTHERN HYDRAULICS SAE 30 COMPRESSOR OIL,
| 64742-65-0
64742-62-7 |
|
|