Search   
MSDS  : STARTING FLUID
CAS  : 60-29-7
106-97-8
NAME  : ethane, 1,1'-oxybis-; (ethyl ether) (sara iii)
butane; (butane/propane (a-60))
===================== Product Identification =====================

MSDS NAME:STARTING FLUID
NIIN:00N035884
MSDS Number: BQLLD
=== Responsible Party ===
Company:TECHNICAL CHEMICAL CO
Address:10737 SPANGLER RD
City:DALLAS
State:TX
ZIP:75220
Country:US
Info Phone Num:214-556-1421
Emergency Phone Num:800-527-0885
CAGE:8X792
=== Contractor Identification ===
Company:TECHNICAL CHEMICAL COMPANY
Address:10737 SPANGLER ROAD
Box:20098
City:DALLAS
State:TX
ZIP:75220-7101
Country:US
Phone:972-556-1421
CAGE:8X792

============= Composition/Information on Ingredients =============

Name:ETHANE, 1,1'-OXYBIS-; (ETHYL ETHER) (SARA III)
CAS:60-29-7
RTECS #:KI5775000
OSHA PEL:400 PPM;500 STEL
ACGIH TLV:400 PPM;500 STEL
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:BUTANE; (BUTANE/PROPANE (A-60))
CAS:106-97-8
RTECS #:EJ4200000
OSHA PEL:800 PPM
ACGIH TLV:800 PPM

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:A DRY SCALY FISSURED DERMATITIS.
CHRONIC:ANOREXIA, EXHAUSTION, HEADACHE, DROWSINESS, DIZZINESS,
EXCITATION AND PSYCHIC DISTURBANCE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:ALCOHOLISM HAS NARCOTIC PROPERTIES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

======================= First Aid Measures =======================

First Aid:INHAL:IF PERSON BREATHES IN LARGE AMOUNTS OF THIS CHEMICAL,
MOVE TO FRESH AIR AT ONCE AND PERFORM ARTIFICIAL RESPIRATION.
EYES:IRRIGATE IMMEDAITELY FOR AT LEAST 15 MINUTES. SKIN:FLUSH WITH
WATER IMMED IATELY. INGEST:GIVE LARGE QUANTITIES OFSALT WATER AND
INDUCE VOMITING. DO NOT MAKE AN UNCONSCIOUS PERSON VOMIT. GET
MEDICAL ATTENTION.

===================== Fire Fighting Measures =====================

Flash Point Method:CC
Flash Point:25F,-3.9C
Lower Limits:1.9%
Upper Limits:36%
Extinguishing Media:CARBON DIOXIDE AND DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:PROD EXTREMELY FLAMM. VAP MAY IGNITE.
NEVER USE NEAR OPEN FLAMES. VAP MAY TRAVEL TO SOURCE OF IGNIT &
FLASH BACK. RUNOFF TO SEWERS MAY CREATE FIRE.

================== Accidental Release Measures ==================

Spill Release Procedures:WEAR APPROPRIATE RESPIRATORY PROTECTION AND
PROTECTIVE CLOTHING AS DESCRIBED IN CONTROL MEASURES SECTION.
CONTAIN SPILLED MATERIAL. TRANSFER TO SECURE CONTAINERS WHERE
NECESSARY, COLLECT USING ABSORBE NT MEDIA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:PROTECT CONTAINER AGAINST PHYSICIAL
DAMAGE. DETACHED OR OUTSIDE STORAGE IS PREFERRED.
Other Precautions:STORAGE SHOULD BE IN ACCORDANCE WITH NFPA FLAMMABLE
LIQUIDS REQUIRMENTS.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:IF EXPOSURE EXCEEDS ACCEPTABLE CRITERIA, USE
NIOSH/MSHA APPROVED RESPIRATORY PROTECTION EQUIPMENT. RESPIRATOR
SHOULD BE SELECTED BASED ON FORM AND CONCENTRATION.
Ventilation:OPEN AREA WHEN USING A SMALL AMOUNT. MECHANICAL (GENERAL)
VENTILATION.
Protective Gloves:NITRILE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE NITRILE COATED CLOTHING IF THERE IS
POTENTIAL FOR REPEATED OR PROLONGED SKIN CONTACT.
Work Hygienic Practices:IMMEDIATELY CHANGE CLOTHES THAT HAVE BEEN
SATURATED WITH PRODUCT, COULD BE A FIRE HAZARD.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

================== Physical/Chemical Properties ==================

HCC:V3
Boiling Pt:B.P. Text:95F,35C
Melt/Freeze Pt:M.P/F.P Text:-190F,-123C
Vapor Pres:442 @ 20C
Vapor Density:2.6
Solubility in Water:7.6% @ 20C
Appearance and Odor:CLEAR-SLIGHTLY YELLOW WITH AN ETHER ODOR.

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT, OPEN FLAMES AND SPARKS.
Hazardous Decomposition Products:CARBON MONOXIDE CAN FORM ON INCOMPLETE
COMBUSTION.

==================== Disposal Considerations ====================

Waste Disposal Methods:USE ABSORBENT MEDIA TO COLLECT SPILLS-DISPOSE OF
RECOVERED PRODUCT IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
LAPPING VEHICLES (A), DP-704 107-21-1
111-76-2
1330-20-7
67-56-1
LAPPING VEHICLES (A), DP-706 107-21-1
111-76-2
1330-20-7
67-56-1
LAPPING VEHICLES (A), DP-708 107-21-1
111-76-2
1330-20-7
67-56-1
DERUSTO C-H-64 BARBEQUE BLACK ENAMEL 1333-86-4
111-76-2
67-63-0
30136-13-1
7732-18-5
NORFOX 92% GRANULES, 1009
KEROSENE DEODORIZED 64742-96-7
Q.D. ENAMEL SUPER WHITE, 290100 8052-41-3
POLYESTER RESIN 1070-5, 75157201 100-42-5
BLUE THUNDER FLOOR FINISH, 105890 78-51-3
111-77-3
7732-18-5
PRO TEK TOUGH COAT CATALYZED EPOXY ENAMEL ( 64742-47-8
1330-20-7
64742-95-6
111-76-2
107-21-1
14807-96-6
13463-67-7
CAL PWB86 REV WHITE TINTABLE LATEX, CAL3 107-21-1
7664-41-7
64742-47-8
PAINT, 85 67-56-1
75-09-2
64742-94-5
SB BONDING AGENT 50-00-0
50-00-0
PASTE-FLAT, 110595 14807-96-6
14808-60-7
112926-00-8
108-65-6
TEF-LEX, 5063 71-55-6
ACETAL SHAPES, ACE
SPACKLING PASTE 1317-65-3
7732-18-5
12001-26-2
14807-96-6
9003-20-7
1332-58-7
9004-62-0
INGERSOLL-RAND DSL-125
NUTS N BOLTS 427 128-44-9
80-15-9
LEAD FREE PLUMBING SOLDER 7440-31-5
7440-22-4
7440-36-0
7440-50-8
OXFORD KLEEN BRAKE, 07009 71-55-6
124-38-9
67-63-0
OXFORD LIFT, 07502 111-76-2
6834-92-0
7732-18-5
7758-29-4
25155-30-0
GREEN WELDABLE PRIMER, X-6468 1330-20-7
108-88-3
8032-32-4
64742-89-8
100-41-4
ENPLATE PC-237, 3216 7732-18-5
7647-01-0
C*14-C*16 NORMAL PARAFFINS
M.E.K. KLEAN STRIP, GME71 78-93-3
HEAT STOP 14464-46-1
1302-78-9
1344-28-1
OPTICLEAN POLYMER 60.118 (FORMERLY 60.120) 64-17-5
141-78-6
BONUTITE WHITE DIAMOND BODY FILLER 100-42-5
25464-21-5
14807-96-6
10483-67-7
CHEMOLA DRY TFE LUBE 910 71-55-6
74-98-6
106-97-8
SIL-X GREASE NLGI 1, CPS255779 112945-52-5
PR-868, PART A 26447-40-5
9016-87-9
61788-32-7
69102-90-5
PR-868, PART B 25791-96-2
8001-79-4
25190-06-1
69102-90-5
NUZ; WHITE VITRIOL; ZINC SULFATE; ZINC (SUP 7733-02-0
STARTING FLUID 60-29-7
106-97-8
BOUNCE BACK 111-90-0
F-20 DARK GRAY 26008, 820S2968 1314-13-2
63148-69-6
112945-52-5
1344-37-2
14807-96-6
8052-41-3
64742-89-8
13463-67-7
SF-730NT1 BLACK TONER 1333-86-4
LOW VISCOSITY MINERAL OIL, DROMUS OIL B
TOWLINE ROCKET 1332-37-2
7790-98-9
7440-42-8
10022-31-8
ROCK DRILL OIL VISTAC ISO 32, CPS232500 63449-39-8
64742-98-6
ALKYD Q.D. MEDIUM GLOSS ENAMEL, 37 64742-47-8
SELECTRON RHODIUM HB SOLUTION, SPS 5805 7440-16-6
7664-93-9
7732-18-5
SURF-KOTE A-1625 AEROSOL 1317-33-5
7782-42-5
108-88-3
64-17-5
64742-14-9
75-09-2
68476-86-8
HOT PRESSED CERAMIC GRADE TBH 1344-28-1
1314-23-4
1314-36-9
1920 DEFOMER
WELDWOOD FLOOR TILE CEMENT (3081) 64742-11-6
8052-41-3
9016-45-9
TURBINE OIL GST ISO 32, CPS253026
SOLDER ALLOYS CONTAINING LEAD 7439-92-1
7440-31-5
7440-22-4
7440-69-9
7440-36-0
7440-50-8
7440-74-6
NORTHERN HYDRAULICS SAE 30 COMPRESSOR OIL, 64742-65-0
64742-62-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net