| MSDS | : | NORTHERN HYDRAULICS SAE 30 COMPRESSOR OIL, | | CAS | : | 64742-65-0
64742-62-7 | | NAME | : | refined petroleum oils containing ings 2 & 3 or ients
mineral oil, petroleum distillates, solvent-dewaxed heavy
refined petroleum oil
refined petroleum oil; (other refined petroleum oil(s)).
anti-wear, anti-oxidant, anti-mist additive; (anti-wear
phosphorodithioic acid, dialkyl ester, zinc salt (zinc
mixed fatty ester of styrene-maleic anhydride. ld50: (oral,
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:NORTHERN HYDRAULICS SAE 30 COMPRESSOR OIL,
NIIN:00N035909
MSDS Number: BQLLX
=== Responsible Party ===
Company:CITGO PETROLEUM CORP
Box:3758
City:TULSA
State:OK
ZIP:74102
Country:US
Info Phone Num:918-495-5933
Emergency Phone Num:318-491-6215
CAGE:7X110
=== Contractor Identification ===
Company:CITGO PETROLEUM CORP
Address:6100 S YALE AVE
Box:3758
City:TULSA
State:OK
ZIP:74102
Country:US
Phone:918-495-5933
CAGE:7X110
============= Composition/Information on Ingredients =============
Name:REFINED PETROLEUM OILS CONTAINING INGS 2 & 3 OR INGREDIENTS
4, 5 & 6. LD50: (ORAL, RAT): >15 G/KG.(PEL/TLV AS OIL MIST)
RTECS #:9999999ZZ
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3;10 STEL
Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY
PARAFFINIC (SEVERE SOLVENT-REFINING AND/OR HYDROTREATED)
CAS:64742-65-0
RTECS #:PY8038501
Fraction by Wt: 99%
Name:REFINED PETROLEUM OIL
CAS:64742-62-7
Fraction by Wt: 99%
Name:REFINED PETROLEUM OIL; (OTHER REFINED PETROLEUM OIL(S)).
LD50: (ORAL, RAT) > 5 G/KG. (PEL/TLV AS OIL MIST)
Fraction by Wt: >99%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3;10 STEL
Name:ANTI-WEAR, ANTI-OXIDANT, ANTI-MIST ADDITIVE; (ANTI-WEAR
RUST AND OXIDATION INHIBITOR ADDITIVES (CONTAINS ING 6)
Fraction by Wt: <1%
Name:PHOSPHORODITHIOIC ACID, DIALKYL ESTER, ZINC SALT (ZINC
DIALKYLDITHIOPHOSPHATE)
RTECS #:TD5550000
Name:MIXED FATTY ESTER OF STYRENE-MALEIC ANHYDRIDE. LD50: (ORAL,
RAT) 60.3 G/KG.
Fraction by Wt: <1%
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SLIGHTLY TOX, 1 PT TO 1 QT IS APPROX
LETHAL ORAL DOSE FOR 150 LB. HUMAN ADULT. ACUTE:INHAL:LOW RISK OF
INHAL IN ENCLSD SPACES/WHEN HOT, VAPS MAY REACH CONC SUFFICIENT TO
CAUSE DROW, DIZZ, HDCH, NAUS/L UNG IRRIT. MISTS > TLV MAY CAUSE
CHEM PNEUMONITIS. SKIN CONT:LOW IRRITANT. SKIN ABSORPTION: NO
PROBABLE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: ACUTE HAZ. EYE: MAY BE MILDLY
IRRITATING. INGEST: GENERALLY LOW TOX. VERY LG AMTS MAY CAUSE
GENERALIZED DEPRESSION, HDCH, DROW, NAUS, VOMIT/DIARR. SM DOSES MAY
PRODUCE IRRIT & DIARR.CHRONIC: PRLNGD AND/OR FREQUENT CONTACT MAY
CAUSE DRYING, CRACKING (DERM)/FOLLICULITIS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHAL:MOVE TO FRESH AIR.RESP SUPPORT IF NEC.SEEK MD
AID.SKIN:WASH W/SOAP & WATER.DO NOT WEAR HEAVILY CONTAMD CLTHG
BEFORE LAUNDERING.EYES:FLUSH W/LG VOLS OF WATER.SEE MD IF ANY
COMPLICATIONS ARISE.ING EST:DO NOT INDUCE VOMIT.SEEK MD
AID.INJECT:SUBCUTANEOUS INJECT IS MD EMER, SEEK MD AID IMMED.NOTE
TO MD:IF VISCOSITY IS < 100 SUS @ 100 F CAREFUL GASTRIC LAVAGE
W/TIGHT FITTING/CUFFED TUBE (SUPP DATA)
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:495F,257C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM OR WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY CAUSE FROTHING.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE SOURCES OF HEAT/IGNIT, PROVIDE ADEQUATE
VENT, CONTAIN LEAK. ABSORB SMALL SPILLS WITH SUITABLE MATL SUCH AS
RAGS, STRAW OR SAND. REPORT SPILLS AS REQUIRED TO APPROPRIATE
AUTHORITIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE < 120F. DOT HAZARD LABEL NOT
REQUIRED. DO NOT APPLY HIGH HEAT/FLAME TO CONTAINER. KEEP SEPARATE
FROM STRONG OXIDIZING AGENTS.
Other Precautions:AVOID PROLONGED CONTACT WITH USED OIL. EMPTY
CONTAINERS MAY CONTAIN PRODUCT RESIDUE WHICH COULD INCLUDE
FLAMMABLE OR EXPLOSIVE VAPORS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NORMALLY NONE REQUIRED. IF HIGH VAPOR OR MIST
CONCENTRATIONS EXPECTED - USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR ORGANIC VAPORS AND MISTS.
Ventilation:VENTILATION IS REQUIRED WHEN WORK PLACE EXPOS > TLV. VERY
HIGH MIST CONCENTRATIONS CAN RSLT IN FIRE & EXPLO HAZARD.
Protective Gloves:OIL IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR BODY-COVERING WORK CLOTHES TO AVOID
PROLONGED OR REPEATED EXPOSURE.
Work Hygienic Practices:WASH SKIN THOROUGHLY WITH SOAP AND WATER.
LAUNDER SOILED WORK CLOTHES BEFORE REUSE.
Supplemental Safety and Health
VP: <1X10-4 @ 25C. FIRST AID PROC:IS TO BE PREFERRED OVER EMESIS.IF
VISCOSITY > 100 SUS @ 100F, EMESIS MAY BE INDUCED FOR LG QTYS.
ASPIR MAY CAUSE CHEM PNEUMONITIS OR LIPOID PNEUMONIA. SUBCUTANEOUS
IN JECTION REQS PROMPT SURGICAL DEBRIDEMENT. IF NOT FAMILAR WITH
TECHNIQUE, SEEK SKILLED ADVICE. SUS VISCOSITY @ 100F=530.
================== Physical/Chemical Properties ==================
HCC:V6
Boiling Pt:B.P. Text:780F,416C
Vapor Pres:SUPP DATA
Vapor Density:>1
Spec Gravity:0.88 (H*2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID; SLIGHT SULFURIZED ODOR.
Percent Volatiles by Volume:NEGLIG
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE, TRACE
OXIDES OF SULFUR, PHOSPHORUS, AND ZINC.
==================== Disposal Considerations ====================
Waste Disposal Methods:IT IS RESPONSIBILITY OF USER TO DETERMINE IF
MATL IS HAZ WASTE AT THE TIME OF DISPOSAL. CHECK BEFORE DISPOSING
TO BE SURE YOU ARE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND
REGULATIONS. DISPOSE OF I/A /W FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
LAPPING VEHICLES (A), DP-704
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
LAPPING VEHICLES (A), DP-706
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
LAPPING VEHICLES (A), DP-708
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
DERUSTO C-H-64 BARBEQUE BLACK ENAMEL
| 1333-86-4
111-76-2
67-63-0
30136-13-1
7732-18-5 |
|
NORFOX 92% GRANULES, 1009
| |
|
KEROSENE DEODORIZED
| 64742-96-7 |
|
Q.D. ENAMEL SUPER WHITE, 290100
| 8052-41-3 |
|
POLYESTER RESIN 1070-5, 75157201
| 100-42-5 |
|
BLUE THUNDER FLOOR FINISH, 105890
| 78-51-3
111-77-3
7732-18-5 |
|
PRO TEK TOUGH COAT CATALYZED EPOXY ENAMEL (
| 64742-47-8
1330-20-7
64742-95-6
111-76-2
107-21-1
14807-96-6
13463-67-7 |
|
CAL PWB86 REV WHITE TINTABLE LATEX, CAL3
| 107-21-1
7664-41-7
64742-47-8 |
|
PAINT, 85
| 67-56-1
75-09-2
64742-94-5 |
|
SB BONDING AGENT
| 50-00-0
50-00-0 |
|
PASTE-FLAT, 110595
| 14807-96-6
14808-60-7
112926-00-8
108-65-6 |
|
TEF-LEX, 5063
| 71-55-6 |
|
ACETAL SHAPES, ACE
| |
|
SPACKLING PASTE
| 1317-65-3
7732-18-5
12001-26-2
14807-96-6
9003-20-7
1332-58-7
9004-62-0 |
|
INGERSOLL-RAND DSL-125
| |
|
NUTS N BOLTS 427
| 128-44-9
80-15-9 |
|
LEAD FREE PLUMBING SOLDER
| 7440-31-5
7440-22-4
7440-36-0
7440-50-8 |
|
OXFORD KLEEN BRAKE, 07009
| 71-55-6
124-38-9
67-63-0 |
|
OXFORD LIFT, 07502
| 111-76-2
6834-92-0
7732-18-5
7758-29-4
25155-30-0 |
|
GREEN WELDABLE PRIMER, X-6468
| 1330-20-7
108-88-3
8032-32-4
64742-89-8
100-41-4 |
|
ENPLATE PC-237, 3216
| 7732-18-5
7647-01-0 |
|
C*14-C*16 NORMAL PARAFFINS
| |
|
M.E.K. KLEAN STRIP, GME71
| 78-93-3 |
|
HEAT STOP
| 14464-46-1
1302-78-9
1344-28-1 |
|
OPTICLEAN POLYMER 60.118 (FORMERLY 60.120)
| 64-17-5
141-78-6 |
|
BONUTITE WHITE DIAMOND BODY FILLER
| 100-42-5
25464-21-5
14807-96-6
10483-67-7 |
|
CHEMOLA DRY TFE LUBE 910
| 71-55-6
74-98-6
106-97-8 |
|
SIL-X GREASE NLGI 1, CPS255779
| 112945-52-5 |
|
PR-868, PART A
| 26447-40-5
9016-87-9
61788-32-7
69102-90-5 |
|
PR-868, PART B
| 25791-96-2
8001-79-4
25190-06-1
69102-90-5 |
|
NUZ; WHITE VITRIOL; ZINC SULFATE; ZINC (SUP
| 7733-02-0 |
|
STARTING FLUID
| 60-29-7
106-97-8 |
|
BOUNCE BACK
| 111-90-0 |
|
F-20 DARK GRAY 26008, 820S2968
| 1314-13-2
63148-69-6
112945-52-5
1344-37-2
14807-96-6
8052-41-3
64742-89-8
13463-67-7 |
|
SF-730NT1 BLACK TONER
| 1333-86-4 |
|
LOW VISCOSITY MINERAL OIL, DROMUS OIL B
| |
|
TOWLINE ROCKET
| 1332-37-2
7790-98-9
7440-42-8
10022-31-8 |
|
ROCK DRILL OIL VISTAC ISO 32, CPS232500
| 63449-39-8
64742-98-6 |
|
ALKYD Q.D. MEDIUM GLOSS ENAMEL, 37
| 64742-47-8 |
|
SELECTRON RHODIUM HB SOLUTION, SPS 5805
| 7440-16-6
7664-93-9
7732-18-5 |
|
SURF-KOTE A-1625 AEROSOL
| 1317-33-5
7782-42-5
108-88-3
64-17-5
64742-14-9
75-09-2
68476-86-8 |
|
HOT PRESSED CERAMIC GRADE TBH
| 1344-28-1
1314-23-4
1314-36-9 |
|
1920 DEFOMER
| |
|
WELDWOOD FLOOR TILE CEMENT (3081)
| 64742-11-6
8052-41-3
9016-45-9 |
|
TURBINE OIL GST ISO 32, CPS253026
| |
|
SOLDER ALLOYS CONTAINING LEAD
| 7439-92-1
7440-31-5
7440-22-4
7440-69-9
7440-36-0
7440-50-8
7440-74-6 |
|
NORTHERN HYDRAULICS SAE 30 COMPRESSOR OIL,
| 64742-65-0
64742-62-7 |
|
|