LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DUST MAY IRRITATE EYES,
RESPIRATORY TRACT AND MUCOUS MEMBRANES. CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:NOSE, THROAT AND LUNG IRRITATION FROM DUST.
Medical Cond Aggravated by Exposure:PREEXISTING RESPIRATORY DISORDERS
MAY BE AGGRAVATED BY EXPOSURE TO THIS MATERIAL'S DUST.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE PERSON TO FRESH AIR. EYES: FLUSH WITH
PLENTY OF WATER FOR 15 MINUTES. SKIN: WASH WITH SOAP AND WATER.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:WATER, CARBON DIOXIDE, FOAM
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Spill Release Procedures:NONE-THIS IS SOLID MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT ATTEMPT TO BREAK UNLESS EYES
ARE PROTECTED FROM POSSIBLE FLYING SPLINTERS OR PARTICLES.
Other Precautions:MATERIAL FUSED INTO A NON-REACTIVE STATE. IF MATERIAL
IS MACHINED OR SAWED, DUST CAN BE A HAZARD.
Respiratory Protection:NIOSH APPROVED PARTICULATE RESPIRATORS TC-21C
SERIES MAY BE USED IF PEL IS EXCEEDED.
Ventilation:USE DUST COLLECTOR FOR SAWING OR MACHINING.
Protective Gloves:WORK GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING.
Supplemental Safety and Health
WET SWEEPING WILL MINIMIZE DUST GENERATION.
HCC:N1
Boiling Pt:B.P. Text:NONE
Vapor Pres:NONE
Vapor Density:NONE
Spec Gravity:SOLID
Evaporation Rate & Reference:NONE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID, NO ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES WILL CAUSE SURFACE DAMAGE.
Stability Condition to Avoid:HEATING ABOVE 450F
Hazardous Decomposition Products:SMALL QUANTITIES OF HYDROGEN CYNIDE,
CARBON MONOXIDE, CARBON DIOXIDE, APPROXIMATELY THE SAME AS WOOD.
Conditions to Avoid Polymerization:HEATING ABOVE 450F.
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.