Search   
MSDS  : 68-SX-87 EPOXY REPAIR, 06887
CAS  : 90-72-2
25068-38-6
NAME  : phenol, 2,4,6-tris(dimethylamino methyl)
epoxy resin (diglycidyl ether of bisphenol a)
===================== Product Identification =====================

MSDS NAME:68-SX-87 EPOXY REPAIR, 06887
NIIN:00N036528
MSDS Number: BQRBY
=== Responsible Party ===
Company:SELIG CHEMICAL INDUSTRIES
Address:840 SELIG DR SW
City:ATLANTA
State:GA
ZIP:30378
Country:US
Info Phone Num:404-691-9220
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:86938
=== Contractor Identification ===
Company:SELIG CHEMICAL INDUS, DIV OF NATIONAL SERVICE INDUS
Address:840 SELIG DR SW
Box:City:ATLANTA
State:GA
ZIP:30378
Country:US
Phone:404-691-9220
CAGE:86938

============= Composition/Information on Ingredients =============

Name:PHENOL, 2,4,6-TRIS(DIMETHYLAMINO METHYL)
CAS:90-72-2
RTECS #:SN3500000
Fraction by Wt: 1.5%

Name:EPOXY RESIN (DIGLYCIDYL ETHER OF BISPHENOL A)
CAS:25068-38-6
RTECS #:KC2100000
Fraction by Wt: 15%

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYE:POSSIBLE SENISITIZER AND
IRRITANT. INGEST:CAN CAUSE NAUSEA AND VOMITING. INHAL:NONE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

======================= First Aid Measures =======================

First Aid:SKIN:WASH WITH SOAP & WATER. EYE:FLUSH IMMEDIATELY WITH
PLENTY OF WATER FOR AT LEAST 15 MINUTES. CALL MD. INHAL:MOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) . INGEST:RINSE
MOUTH AND GIVE PLENTY OF WATER TO DRINK. INDUCE VOMITING. GET MD
IMMEDIATELY.

===================== Fire Fighting Measures =====================

Flash Point Method:TCC
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CO, ALDEHYDES, ACIDS, OXIDES OF SILICON
AND NITROGEN MAY BE FORMED.

================== Accidental Release Measures ==================

Spill Release Procedures:DISPOSE OF IN A NORMAL MANNNER. NOT A
POTENTIAL POLLUTANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:HARMFUL IF SWALLOWED. AOVID EYE
CONTACT AND EXCESSIVE SKIN CONACT.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:NOT REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:ONLY IF HEATED ABOVE 100F (LOCAL).
Protective Gloves:POLYETHYLENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

================== Physical/Chemical Properties ==================

HCC:N1
Vapor Pres:NIL
Spec Gravity:1.9
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:PUTTY LIKE, MERCAPTAN ODOR
Percent Volatiles by Volume:0

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, ALDEHYDES, AICDS, OXIDES OF
SILICON AND NITROGEN.

==================== Disposal Considerations ====================

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL
ACCORDING TO APPLICABLE REGULATIONS. DISPOSE IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
FOOTHOLD-GREY, DL2440 64641-92-0
61788-76-9
1330-20-7
1317-65-3
SUPER SIDEWINDER, DH6005
PRO TRUCKER, DL1500 64742-94-5
64742-94-5
72245-28-6
64742-06-9
24937-78-8
64741-88-4
2,2-DIMETHOXYPROPANE 98%, D13680-8 77-76-9
INTERZINC 22 RED SILICATE BASE, 2410 64742-95-6
110-80-5
78-10-4
QUALITEK 303 FLUX 67-63-0
QUALITEK 305 FLUX 67-63-0
QUALITEK 307 FLUX 67-63-0
DRIVE HERBICIDE 50 WP, 548507 84087-01-4
FLEXCO PART A 76 EPOXY ADHESIVE 84-74-2
25068-38-6
FLEXCO PART B 76 EPOXY ADHESIVE 68082-29-1
112-24-3
141-43-5
67-63-0
AMJET 300 WASH 67-56-1
78-93-3
TRIETHYL ORTHOPROPIONATE 97%, T6060-7 115-80-0
TURBO T OIL 220, 65609 64742-70-7
64742-54-7
64742-57-0
92-009 DISPERSION COATING 64742-89-8
2224-33-1
68909-20-6
69430-24-6
70131-67-8
SIPONIC 218, 150401 9004-83-5
NEUTRAMEEN NA-9 100-37-8
TCM68 CLEAR TONER 64742-48-9
1001 VAPOR BARRIER 75-35-4
107-21-1
111-46-6
LIQUID SULFUR DIOXIDE OR SULFUR DIOXIDE 7446-09-5
SHOE POLISH 8052-41-3
64741-41-9
495-54-5
509-34-2
95-63-6
MULTISOLVE 35 (AEROSOL), TX132 1717-00-6
67-63-0
67-56-1
75-52-5
124-38-9
957 COMPOUND HOT VAT STRIP 1310-73-2
1319-77-3
FRE-THIN THINNER 67-56-1
67-63-0
108-88-3
123-86-4
HPS ADHESIVE HIGH PRESSURE SEALANT, 121700 14808-60-7
64742-89-8
SOLVO RUST SUPER PENETRATING OIL, 81252 8008-20-6
8052-41-3
75-28-5
74-98-6
111-76-2
CATHA COAT 304 LIQUID PORTION PART A, MD305 107-98-2
1330-20-7
37300-23-5
90-72-2
1332-58-7
64-17-5
78-10-4
CATHA COAT 304 POWDER PORTION PART B, MD305 7440-66-6
422 MARINE SPAR VARNISH
68-SX-87 EPOXY REPAIR, 06887 90-72-2
25068-38-6
DELTA SOLDER PASTE SN 63 ALLOY TYPE 650 7440-31-5
7439-92-1
65997-05-9
DEX-O-TEX P-61 PASTE, 1119
DEX-O-TEX P-61 PASTE, 1120
DEX-O-TEX P-61 PASTE, 1121
DEX-O-TEX P-61 PASTE, 1122
WRITE-OFF, 0566 108-65-6
138-86-3
1119-40-0
61790-63-4
141-43-5
1310-58-3
64742-94-5
111-76-2
DE-BUG AEROSOL, 5090 115-10-6
64-17-5
2921-35-2
PR-1141 PC-2 (DARK GRAY), PART A 1333-86-4
PR-1141 PC-1 TO PC-49 COLORS, PART B 108-65-6
55636-48-1
4098-71-9
64742-47-8
SPECTRUM DIAMOND COMPOUND
LDC-4702 SILVER STRIKE 7732-18-5
151-50-8
506-61-6
PR-1141 PC-57 BRICK RED, PART A 110-43-0
1309-37-1
68611-44-9
38499-32-1
10101-39-0
PENETRATING OIL STAIN CLEAR BASE, 28-012 8052-41-3
LAYOUT BROWN DX-257 (TRANSPARENT SERIES) 71077-14-0
1328-51-4
123-86-4
64-17-5
71-36-3
9004-70-0
67-63-0
PLASMA QUENCH 617 7631-99-4
HIR IN 0.187 INCH THICKNESS AND GREATER & T
CARBON MONOXIDE IN NITROGEN 630-08-0
7727-37-9
ARCTIC BAN 57-55-6
141-78-6
64-17-5
7732-18-5
PH ADJUSTER 533-96-0
TIMBERTONE ALKYD WOOD STAIN, 57-0 8052-41-3
64742-88-7
64742-95-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net