Search   
MSDS  
:
 HEMA-TEK(WRIGHT-GIEMSA) STAIN PAK-STAIN SOL
CAS  
:
 67-56-1
NAME  
:
 methanol; (methyl alcohol)
Catalog of Chemical Suppliers, Buyers, Custom Synthesis Companies And Equipment Manufacturers
[ HEMA-TEK(WRIGHT-GIEMSA) STAIN PAK-STAIN SOL 67-56-1 ]
Suppliers:   
Not Available
Buyers:  
Not Available
=====================  Product Identification  =====================

MSDS NAME:HEMA-TEK(WRIGHT-GIEMSA) STAIN PAK-STAIN SOL
NIIN:00N037179
Kit Part:Y
MSDS Number: BQRRC
=== Responsible Party ===
Company:MILES INC
Address:1127 MYRTLE ST
City:ELKHART
State:IN
ZIP:46515
Country:US
Info Phone Num:800-348-8100
Emergency Phone Num:800-348-8100;800-424-9300(CHEMTREC)
Preparer's Name:H.W. MASS
CAGE:MILES
=== Contractor Identification ===
Company:MILE INC DIAGNOSTICS DIV
Address:1127 MYRTLE ST
Box:932
City:ELKHART
State:IN
ZIP:46515-9988
Country:US
Phone:219-262-7429
CAGE:94371
Company:MILES INC
Address:MOBAY ROAD
City:PITTSBURGH
State:PA
ZIP:15205-9741
Country:US
Phone:800-662-2927
CAGE:MILES

=============  Composition/Information on Ingredients  =============

Name:METHANOL; (METHYL ALCOHOL)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: >99%
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY BE FATAL/CAUSE BLINDNESS IF
    SWALLOWED. MAY CAUSE DROWSINESS FOLLOWED BY COUGHING, DYSPNEA,
    HEADACHE, NAUSEA, VOMITING. AS LITTLE AS 15 ML INGESTED HAS CAUSED
    BLINDNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:CALL PHYS & ARRANGE FOR TRANSPORT TO NEAREST ER. INHAL:
    REMOVE TO FRESH AIR. IF PERSON HAS STOPPED BRTHG GIVE ARTF. INGEST:
    INDUCE VOMIT IMMED BY GIVING SYRUP OF IPECAC/A TBSP OF SALT
    DISSOLVED IN A G LASS OF WARM WATER. SKIN: REMOVE CONTAMD CLTHG &
    RINSE EXPOS SKIN W/COPIOUS QTY OF WATER FOR 15 MIN. WASH W/SOAP &
    RINSE AREA W/WATER. EYE: GENTLY FLUSH W/LG AMTS OF WATER FOR @ LST
    15-20 (SUPP DATA)

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:52.0F,11.1C
Lower Limits:6%
Upper Limits:36%
Extinguishing Media:USE DRY CHEMICAL, CARBON DIOXIDE, WATER SPRAY OR
    ALCOHOL FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . COOL OTHER CONTAINERS WITH WATER SPRAY UNTIL
    WELL AFTER FIRE IS OUT.
Unusual Fire/Explosion Hazard:VAPOR IS HVR/AIR AND MAY TRAVEL
    CONSIDERABLE DISTANCE TO A SOURCE OF IGNITION THEN FLASHBACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE UP AREA. EXTINGUISH ALL OPEN FLAMES. TAKE
    UP WITH ABSORBENT MATERIAL AND PLACE IN A DISPOSABLE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AS STATED ON THE CONTAINER
    LABEL.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL ROOM VENTILATION.
Protective Gloves:STANDARD LABORATORY.
Eye Protection:CHEMICAL WORKERS GOGGLES AND (SUP DATA)
Other Protective Equipment:CONTACT LENSES SHOULD NOT BE WORN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: MIN. RAISE EYE LIDS TO ASSURE COMPLETE FLUSHING. EYE
    PROTECTION: ADD FULL LENGTH FACESHIELD TO GOGGLE .

==================  Physical/Chemical Properties  ==================

HCC:F5
Boiling Pt:B.P. Text:149F,65C
Spec Gravity:0.7914(H*2O=1)
Evaporation Rate & Reference:4.6(BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:DARK BLUE LIQUID WITH ODOR OF ALCOHOL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:SPARKS, HEAT AND OPEN FLAME.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
    CARBON DIOXIDE &/OR CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE AND FEDERAL
    ENVIRONMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
GLID-GUARD GLID-ZINC INORGANIC COATING, 553 67-63-0
GLID-GUARD GLID-ZINC INORGANIC COATING, 553 7440-66-6
1314-13-2
7439-92-1
THINNER, GTA407 1330-20-7
108-10-1
550 COLD-SOLVENT COAT REMOVER 108-88-3
64-18-6
1319-77-3
75-09-2
5006 COLD SOLVENT PAINT STRIPPER 108-88-3
67-56-1
111-76-2
64-18-6
75-09-2
7664-39-3
5007 COLD SOLVENT PAINT STRIPPER ADDITIVE 7664-39-3
111-76-2
67-56-1
75-09-2
QUICK BILD II 100-42-5
13463-67-7
7727-43-7
1480-96-6
CREME HARDNER 94-36-0
85-68-7
26027-38-3
471-34-1
7631-86-9
1317-61-9
51274-00-1
VARAMIDE A7, 650-135 93-83-4
111-42-2
SET INSTANT CONCRETE 65997-15-1
14808-60-7
EMBEGUARD CR PART A (FORMERLY CONCRESIVE 13 25068-38-6
4-METHYL-2-PENTANONE HEXONE; METHYL ISOBUTY 108-10-1
N,N-DIMETHYLACETAMIDE DMAC, 0400357 127-19-5
PROLINK VANDALISM SPRAY 18 OZ, 870 9016-45-9
68476-85-7
75-09-2
127-18-4
108-88-3
VOC INTERNAL STANDARDS MIX, 48835 74-97-5
540-36-3
108-90-7
67-56-1
ZEST POT & PAN DETERGENT, 196745 7758-29-4
1310-73-2
27176-87-0
26027-38-3
7732-18-5
DYNALOY 350 25085-50-1
7440-22-4
1330-20-7
109-86-4
111-76-2
METALPHOTO POLISH 63148-62-9
61790-53-2
7732-18-5
64742-88-7
61790-12-3
BORAX 22.820 1303-96-4
HYPLAR MODELING PASTE AND EXTENDER 9003-01-4
132-27-4
471-34-1
9004-67-5
WEATHERPROOF ALUMINUM PAINT, 137 7429-90-5
8052-41-3
63393-89-5
WEATHERPROOF ALUMINUM PAINT, C137 7429-90-5
8052-41-3
63393-89-5
ALKYD PRIMER SEALER, 200 12174-11-7
14808-60-7
13463-67-7
14807-96-6
471-34-1
7631-86-9
8052-41-3
ALKYD PRIMER SEALER, C200 8052-41-3
12174-11-7
14808-60-7
13463-67-7
14807-96-6
471-34-1
7631-86-9
INTERGARD HS UNIV EPOXY HAZE GRAY, FPK705 71-36-3
110-43-0
25068-38-6
EPOXY STEEL HARDENER 1 OZ, 48105 1317-65-3
7727-43-7
14807-96-6
98-00-0
68410-23-1
EPOXY STEEL HARDENER 5 OZ, 48171 1317-65-3
7727-43-7
14807-96-6
98-00-0
68410-23-1
PAINT PRODUCT, 0V81016184A011 1330-20-7
14807-96-6
71-36-3
108-10-1
TRAFFIC-LINE INT-EXT WATER BASED TRAFFIC (S 1336-21-6
7732-18-5
1317-65-3
13463-67-7
12001-26-2
111-76-2
14808-60-7
TRAFFIC-LINE INT-EXT WATER BASED TRAFFIC (S 1317-65-3
7732-18-5
7759-97-6
12001-26-2
111-76-2
14808-60-7
1336-21-6
NU-SAL
FOAM INSULATION ADHESIVE, 118 64742-89-8
8012-95-1
EU-100: HARDENER COMPONENT 26950-63-0
112-24-3
PR-164 CONCRETE PART A 68609-97-2
25068-38-6
LATEX SATIN & GLOSS EXTERIOR FINISHES A-100 107-21-1
112-34-5
14464-46-1
13463-67-7
1314-13-2
LATEX SATIN & GLOSS EXTERIOR FINISHES A-100 13463-67-7
1314-13-2
107-21-1
112-34-5
14464-46-1
LATEX SEMI-GLOSS & GLOSS INTERIOR (SUPP DAT 112-34-5
13463-67-7
LATEX FLAT INTERIOR PROFESSIONAL FINISHES ( 14464-46-1
14807-96-6
471-34-1
13463-67-7
LATEX FLAT INTERIOR PROFESSIONAL FINISHES ( 14808-60-7
14464-46-1
13463-67-7
107-21-1
LATEX FLAT INTERIOR PROFESSIONAL FINISHES ( 14808-60-7
14464-46-1
13463-67-7
107-21-1
LATEX FLAT INTERIOR PROFESSIONAL FINISHES ( 14808-60-7
14464-46-1
13463-67-7
107-21-1
LATEX FLAT INTERIOR PROFESSIONAL FINISHES ( 14808-60-7
14464-46-1
13463-67-7
107-21-1
BROWN WELDABLE PRIMER, X-6541 1330-20-7
108-88-3
8032-32-4
64742-89-8
100-41-4
POXY PRIME CATALYST, DP701 108-88-3
71-36-3
67-63-0
1330-20-7
HEMA-TEK(WRIGHT-GIEMSA) STAIN PAK-BUFFER (S 67-56-1
HEMA-TEK(WRIGHT-GIEMSA) STAIN-PAK RINSE SOL 67-56-1
HEMA-TEK(WRIGHT-GIEMSA) STAIN PAK-STAIN SOL 67-56-1
DMA 4, EPA REG 464-196-39511 94-75-7
LITHIUM CARBONATE 554-13-2
COLD PATCH B (382) 1309-48-4
1344-09-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com