lithium chloride supp data: provide prot screens & flash gogg, if nec, to ing 12:dark to see weld zone. then go to next lighter shade haz decomp:arc. reasonably expected constituents of fume ing 14:other materials listed in ients. efts of overexp: deposits in lungs) & may affect pulm func. ing 16:erosion. ing 1: silver & silver cmpds stain ing 17:to copper & copper oxide have been rptd in ing 18:cause pulm edema & pneum. arc rays can injure eyes & ing 19:cadmium. cancer haz. avoid creating dust. can cause hndlg/stor prec: in worker's brthg zone. silver copper. pel: 1.0 mg/m3 dust; 0.1 fume. tlv: 1.0 mg/m3 dust; cadmium. pel: 0.1 mg/m3 fume; 0.2 dust. tlv: 0.05 mg/m3 zinc (pel/tlv as zinc oxide) boron oxide; (boric acid) potassium fluoride (pel/tlv as f) sodium fluoride (pel/tlv as f) potassium borate potassium chloride sodium chloride
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:FUMES & GASES MAY BE INHALED & CAN BE
DANGEROUS TO YOUR HLTH. SKIN/EYE CONT MAY OCCUR W/FLUXES & CHEM
AIDS.ACUTE:SHORT TERM OVEREXP TO WELD FUMES MAY RSLT IN DISCOMFORT
SUCH AS DIZZ/NAUS/DRY/IRRIT OF NOSE, THROAT/EYES. ING 1: SALTS OF
SILVER ARE CORR. ULCERATION & EYE BURNS ARE TREATED BY USING
COPIOUS(EFTS OF OVEREXP)
Explanation of Carcinogenicity:CADMIUM: GROUP 2A(IARC), ANTICIPATED TO
BE CARCINOGEN(NTP), OSHA REGULATED.
Effects of Overexposure:HLTH HAZ:AMTS OF WATER.ING 2:METAL FUME FEVER
CAN BE CAUSED BY FRESH COPPER OXIDE FUME. ING 4:CHILLS/BRTHG
DFCLTY, FEVER, COUGH, MUSCULAR PAIN/NAUS & VOMIT. RECOVERY
GENERALLY COMPLETE. FLUORIDE CMPDS EVOLVED MAY CAUSE SKIN & EYE
BURNS, PULM EDEMA, BRONCH. CHRONIC: LONG TERM OVEREXP MAY LEAD TO
SIDEROSIS (IRON (ING 16)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:REMOVE TO WELL VENTD AREA. CALL FOR MED AID. EMPLOY FIRST AID
TECH RECOM BY AMERICAN RED CROSS. INHAL: REMOVE TO FRESH AIR.
SUPPORT BRTHG (GIVE O*2/ARTF RESP) . INGEST: CALL MD IMMED . SKI N:
FLUSH WITH COPIOUS AMOUNTS OF WATER.CALL MD . EYE: IMMED FLUSH WITH
POTABLE WATER FOR A MINIMUM OF 15 MIN, SEEK ASSISTANCE FROM MD .
===================== Fire Fighting Measures =====================
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONFLAMM. WELDING ARC & SPARKS & BRAZING
FLAMES CAN IGNITE COMBUSTIBLES & FLAMMABLES. REFER TO ANSI Z49.1
FOR FIRE PREVENTION DUR USE OF WELDING & ALLIED PROC.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:ONE RECOM WAY TO DETERM COMPOSITION
QTY OF FUMES & GASES TO WHICH WORKERS ARE EXPOS IS TO TAKE AN AIR
SAMPLE INSIDE WELDER'S HELMET IF WORN/ (ING 21)
Other Precautions:READ & UNDERSTAND MFR'S INSTRUC & PRECAUTIONARY LBL
ON PROD. (SEE AMERICAN NATL STD Z49.1 "SFTY IN WELDING & CUTTING"
PUBLISHED BY AMERICAN WELD SOCIETY, P.O. BOX 351040, MIAMI, FL
33135 & OSHA PUBLIC ATION 2206 (29CFR1910, U.S. GOVT(SUPDAT)
Respiratory Protection:USE NIOSH/MSHA APPRVD RESPIRABLE FUME RESP/AIR
SUPPLIED RESP WHEN WORKING IN CONFINED SPACE/WHERE LOCAL
EXHAUST/VENT DOES NOT KEEP EXPOS BELOW RECOM EXPOS LIM.
Ventilation:USE ENOUGH GEN VENT & LOC EXHAUST @ ARC/BOTH TO KEEP FUMES
& GASES FROM WORKER'S BRTHG ZONE & GEN AREA. TRAIN (SUPP DATA
Protective Gloves:WELDER'S GLOVES.
Eye Protection:CHEM WORK GOG W/FULL LENGTH FSHLD.
Other Protective Equipment:WEAR HAND, HEAD & BODY PROD WHICH HELP TO
PVNT INJURY FROM RADIA, SPARKS, & ELEC SHOCK. SEE ANSI Z49.1. @ A
(SUPP DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC: PRINTING OFFICE, WASHINGTON, D.C. 20402 FOR MORE DETAIL).
VENT: WORKER TO KEEP HEAD OUT OF FUMES. OTHER PROT EQUIP: MIN, THIS
INCL ARM PROTECTORS, APRONS, HATS, SHOULDER PROT, AS WELL AS D ARK
SUBSTANTIAL CLTHG. TRAIN WORKER NOTTO TOUCH LIVE ELEC PARTS & TO
INSULATE HIMSELF FROM WORK & GROUND. (ING 12)
HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:GASEOUS RXN PROD MAY INCL CARBON
MONOXIDE & CARBON DIOXIDE. OZONE & NITROGEN OXIDES MAY BE FORMED BY
RADIA FROM (ING 14)
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE, AN D LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.