Effects of Overexposure:UNDER NORMAL HANDLING AND USE EXPOS TO ALNICO
PRODUCTS PRESENT NO OR FEW HEALTH HAZARD.SUPP DATA.
===================== Fire Fighting Measures =====================
Fire Fighting Procedures:NONE(PER MFR)
Unusual Fire/Explosion Hazard:MAY OCCUR IN CASE OF RAISING DRY,FINE
GRAINED DUST IN AIR.HAZARD IS REDUCED BY MACHINING WET
====================== Handling and Storage ======================
Handling and Storage Precautions:WHEN MACHINING ALNICO USE COOLANT TO
REDUCE DUSTING.
Other Precautions:HANDLE W/ CARE WHEN MAGNETIZED TO PREVENT INJURY OR
DAM BY STRONG ATTRACTIVE/REPULSIVE FORCES.CONTROL THE MOVEMENT OF
OTHER MAGNETIC MATERIALS WHEN NEAR STRONG MAGNETIC FIELD.
Respiratory Protection:OSHA/MSHA APPRVD POWDERS & DUST PROPER
RESPIRATOR
Ventilation:MECHANICAL
Protective Gloves:RUBBER
Eye Protection:PROTECTIVE GOGGLES
Other Protective Equipment:N/R(PER MFR)
Supplemental Safety and Health
MSDS PREP:30JAN86.BP:>2500C.SPECIFIC GRAVITY:6.9-7.4.OVEREXPO:POWDER OR
DUST FROM MACHINING MAY CAUSE SOME SKIN IRRITATION IN THE CASES OF
SENSITIVE INDIVIDUALS.EYE:DUST,FUMES MAY CAUSE IRRIT.
Waste Disposal Methods:RECYCLING OF SCRAP METAL IS THE PREFERRED
METHOD.DISPOSAL IN ACCORDANCE TO STATE,FEDERAL,LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.