===================== Product Identification =====================
MSDS NAME:INCOLOY ALLOY 800
NIIN:00N052849
MSDS Number: BVMWW
=== Responsible Party ===
Company:INCO ALLOYS INTERNATIONAL, INC.
Box:1958
City:HUNTINGTON
State:WV
ZIP:25720
Country:US
Info Phone Num:304-526-5687
Emergency Phone Num:304-526-5780
CAGE:28553
=== Contractor Identification ===
Company:INCO ALLOYS INTERNATIONAL, INC. DIV INTL NICKEL CO
Address:3200 RIVERSIDE DR
City:HUNTINGTON
State:WV
ZIP:25705
Country:US
Phone:304-526-5100
CAGE:28553
============= Composition/Information on Ingredients =============
Name:CHROMIUM (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 21%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:IRON (III) OXIDE; (IRON (FE))
CAS:1309-37-1
RTECS #:NO7400000
Fraction by Wt: 46%
Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 1%
OSHA PEL:C 5 MG/M3
ACGIH TLV:C 5 MG/M3, DUST
Name:NICKEL (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 32%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3
Name:EYE PROT:FOR GRINDING/CUTTING WEAR ANSI APPROVED SAFETY
GLASSES
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:CHRONIC:ADVERSE EFTS MAY RESULT FROM
LONG TIME EXPOS TO WELDING FUME, GASES, DUSTS. EFTS MAY INCLUDE
SKIN SENSIT, NEUROLOGICAL DMG, RESP DISEASES SUCH AS BRONCHIAL
ASTHMA, LUNG FIBROSIS/PNEUMOCONIOSIS . NICKEL & CHROMIUM MUST BE
CONSIDERED POSSIBLE CARCINOGENS. ACUTE:EXPOS TO DUST, WELDING FUME
& (EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NICKEL:IARC MONO ON THE EVAL OF
CARCINOGENIC RISK OF CHEM TO MAN, VOL 49, PG 257, 1990:GROUP 2B.
NTP 6TH ANNUAL (SUPDAT)
Effects of Overexposure:HLTH HAZ:GASES MAY CAUSE METALLIC TASTE,
NAUSEA, TIGHTNESS OF CHEST, FEVER, IRRITATION OF EYES, NOSE, THROAT
AND SKIN; LOSS OF CONSCIOUSNESS/DEATH DUE TO WELDING GASES OR LACK
OF OXYGEN.
Medical Cond Aggravated by Exposure:PREEXISTING RESPIRATORY OR ALLERGIC
CONDITIONS MAY OCCUR IN SOME WORKERS.
======================= First Aid Measures =======================
First Aid:REMOVE FROM EXPOSURE AND OBTAIN PROMPT MEDICAL ATTENTION. IF
UNCONSCIOUS, ADMINISTER OXYGEN. IF NOT BREATHING, RESUSCITATE
IMMEDIATELY. EYES:IMMEDIATELY FLUSH EYES W/POTABLE WATER FOR A
MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD . SKIN:FLUSH
W/COPIOUS AMOUNTS OF WATER. CALL MD .
===================== Fire Fighting Measures =====================
Flash Point:NONFLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARCS & SPARKS CAN IGNITE
FLAMMABLE LIQS & VAPORS & COMBUSTIBLE SOLIDS.
================== Accidental Release Measures ==================
Spill Release Procedures:VACUUM OR SHOVEL ANY SPILLED MATERIAL INTO A
SUITABLE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:MAINTAIN EXPOSURES BELOW THE PEL/TLV.
USE INDUSTRIAL HYGIENE AIR MONITORING TO ENSURE USE OF MATL DOES
NOT CREATE EXPOS WHICH EXCEED PEL/TLV.
Other Precautions:ALWAYS USE EXHAUST VENTILATION. DETERMINE ACTUAL
EXPOSURE BY INDUSTRIAL HYGIENE MONITORING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NECESSARY WHEN PERMISSABLE EXPOSURE LIMITS MAY
BE EXCEEDED DURING CUTTING, GRINDING, OR WELDING. USE AIR-SUPPLIED
RESPIRATOR IN CONFINED SPACES. USE ONLY NIOSH/MSHA APPROVED
RESPIRATORS IN ACCORDANCE WITH 29 CFR 1910.134.
Ventilation:USE LOCAL EXHAUST WHEN CUTTING, GRINDING, WELDING. MAINTAIN
EXPOS BELOW LIMITS. CONFINED SPACES REQUIRE SPECIAL ATTEN.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:USE APPROP EYE & FACE PROT FOR (SUPDAT)
Other Protective Equipment:FACE PROTECTION AND FLAME RETARDANT CLOTHING
REQ WHEN CUTTING, WELDING, GRINDING. DO NOT EXPOSE SKIN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLAN OF CARCIN: RPT ON CARCINOGENS, 1991:ANTIC TO BE CARCIN.
HUMAN:LUNGS, NASAL CAVITIES. CHROMIUM:IARC MONO, VOL 49, PG 49,
1990:GROUP 1. NTP 6TH ANNUAL RPT ON CARCIN, 1991:KNOWN TO BE
CARCINOGENIC . HUMAN/ANIMAL:LUNG CANCER, SKIN. EYE PROT:WELDING .
SELECT WELDING LENSE SHADE FROM AWS PUBLICATION F2.2. (ING 5)
================== Physical/Chemical Properties ==================
Appearance and Odor:SOLID METALS SHAPED AS PLATE, BAR, TUBE, WIRE, ROD,
STRIP OR INTERMEDIATE FORM.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES MAY INCL:OXIDES, MIXED
OXIDES OF ING METALS, CHROMATES & FLUORIDES. CO, OZONE, OXIDES OF
NITROGEN.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH EPA, FEDERAL, STATE
OR LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
966C (PMR 15)/QUARTZ FIBERS
| 101-77-9
67-56-1 |
|
IM7 (12K) G-SIZED FIBERS
| 7440-44-0 |
|
M&T SANNNOUS FLUOBORATE SOLUTION ELECTRONIC GRADE
| 13814-97-6 |
|
CURED PMR-15 PREPREG
| 7440-44-0
34406-24-1 |
|
IRONIZE ENAMEL, 603
| 64742-47-8 |
|
SAFETY FINISH
| 78-51-3
111-77-3 |
|
GCR-GASKET CEMENT REMOVER, 765
| 75-09-2
67-56-1
108-88-3
74-98-6
106-97-8 |
|
CL73-1682
| 12001-29-5
116-14-3 |
|
FLUOROPOLYMER ON WOVEN FIBER GLASS FABRIC
| |
|
NAFION NR50
| 31175-20-9 |
|
VESPEL ABRASIVE PREMIX SP1, ST2000
| 25038-81-7
7782-42-5 |
|
CONTAX H P II, 90393
| 142-82-5
110-82-7
74-98-6
64-17-5
67-63-0 |
|
C L P 10.75 OZ NET WT NO CFC'S, 90399
| 142-82-5
110-82-7
74-98-6
64-17-5
67-63-0 |
|
LIQUID CHLORINE
| 7782-50-5 |
|
INCOLOY ALLOY 800
| 7440-47-3
1309-37-1
7439-96-5
7440-02-0 |
|
U-2020 ISOCYANATE
| 26447-40-5
101-68-8 |
|
ACRYLIC EPOXY 138-37A
| 1330-20-7
121-44-8
107-98-2
100-41-4 |
|
RENE 108
| 7440-02-0
7440-48-4
7440-33-7
7440-47-3
7429-90-5
7440-25-7
7440-58-6 |
|
INSTINT COLORANT 516 LAMPBLACK
| 111-46-6
1333-86-4 |
|
FIBER GLASS CLOTH, VOLAN FINISH
| 65997-17-3
15096-41-0 |
|
FLUORESCENT COLORS, FS-9XX SERIES (11 OZ)
| 8032-32-4
108-88-3
110-54-3
74-98-6
75-28-5 |
|
PUM POW
| |
|
OIL/WATER SEPARATOR
| 6834-92-0
1310-73-2
1330-72-7
5131-66-8
872-50-4 |
|
SOY BASED ELECTROSTATIC BLACK INK
| |
|
DIXICHLOR MAX
| 7681-52-9
7647-14-5
1310-73-2
7732-18-5 |
|
REZTORE ANTISTATIC SURFACE CLEANER
| 111-76-2
68412-54-4
25322-68-3
7732-18-5 |
|
BATTERY ELECTROLYTE
| 7664-93-9 |
|
TETA, TX1235
| 112-24-3 |
|
BISMUTH SUBSALICYLATE
| 14882-18-9 |
|
MAGNESIUM SHEET/PLATE, AZ31B
| 7439-95-4
7429-90-5
7439-96-5
7440-66-6
7440-67-7 |
|
799 SILICONE GLASS & METAL BUILDING SEALANT - CLEAR
| 1760-24-3
112945-52-5
22984-54-9
83817-72-5
70131-67-8 |
|
MAR M 509
| 7440-47-3
7440-48-4
7440-50-8
7439-89-6
7439-96-5
7440-02-0
7440-21-3
7440-25-7
7440-33-7 |
|
414
| 79-10-7
7632-00-0
1310-58-3
1303-96-4
79-06-1
7631-95-0 |
|
RBC-6400
| 7440-02-0
25085-99-8 |
|
RBC-6400B
| 7440-02-0
68082-29-1 |
|
105 ELECTRIC SQUIB-STANDARD
| 7440-32-6
7778-74-7 |
|
WHITE REGENCY INT/EXT MOD ACRYLIC GLOSS ENAMEL, W2600
| 7732-18-5
13463-67-7
57-55-6
25265-77-4
56709-13-8
1336-21-6 |
|
CHLOROTRIFLUOROMETHANE
| 75-72-9 |
|
KRYLON 1602 ULTRA FLAT BLACK (NEW FORMULA)
| 74-98-6
108-88-3
1330-20-7
67-64-1 |
|
MERCURY BATTERY BA-1393/U
| 21908-53-2
7439-97-6
1310-58-3 |
|
KRYLON 1604 SHADOW GRAY (NEW FORMULA)
| 67-64-1
71-36-3
74-98-6
78-93-3
108-10-1
108-65-6
108-88-3
1330-20-7
13463-67-7 |
|
635
| 7782-42-5
14808-60-7
60676-86-0 |
|
GEAR SHIELD EXTRA HEAVY, GEAR SHIELD HEAVY, (SUPDAT)
| |
|
PR-1440 B-1/2, ACCELERATOR
| 61788-32-7
1333-86-4
1313-13-9
102-06-7 |
|
PR-1440 B-1/2, BASE
| 13463-67-7
1317-65-3
108-88-3
68611-50-7
67762-90-7 |
|
ZINC CHLORIDE BATTERY BA-15A
| 1313-13-9
7440-66-6
14762-74-4
7646-85-7
7439-92-1
7440-43-9
26545-49-3 |
|
1601 GLOSSY BLACK, SPRAY PAINT
| 74-98-6
75-28-5
108-88-3
100-41-4
1330-20-7
67-64-1
78-93-3
108-10-1
108-65-6 |
|
1501 GLOSSY WHITE, INDUSTRIAL MAINTENANCE (SUPDAT)
| 74-98-6
75-28-5
100-41-4
1330-20-7
71-36-3
67-64-1
78-93-3
108-65-6
13463-67-7 |
|
1701 BRIGHT GOLD, SPRAY PAINT
| 74-98-6
75-28-5
108-88-3
100-41-4
1330-20-7
67-64-1
7440-50-8 |
|
PR-1440 C-20, ACCELERATOR
| 61788-32-7
1333-86-4
1313-13-9
102-06-7 |
|
|