===================== Product Identification =====================
MSDS NAME:WHITE REGENCY INT/EXT MOD ACRYLIC GLOSS ENAMEL, W2600
NIIN:00N052934
MSDS Number: BVMXY
=== Responsible Party ===
Company:AMERITONE PAINT CORP
Box:190
City:LONG BEACH
State:CA
ZIP:90801
Country:US
Info Phone Num:310-639-6791
Emergency Phone Num:310-639-6791;303-623-5716
CAGE:FO133
=== Contractor Identification ===
Company:AMERITONE COATING CORP
Box:City:LONG BEACH
State:CA
ZIP:90801
Country:US
Phone:310-639-6791
CAGE:97903
Company:AMERITONE PAINT CORP/COMPTON, CA 90221
Box:190
CAGE:FO133
============= Composition/Information on Ingredients =============
Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 40%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ACRYLIC RESIN
Fraction by Wt: 25%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 25%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
Name:PROPYLENE GLYCOL. LEL: 2.6%. VP: 0.22 @ 68F.
CAS:57-55-6
RTECS #:TY2000000
Fraction by Wt: <5%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:PROPIONIC ACID, 2-METHYL-, MONOESTER WITH
2,2,4-TRIMETHYL-1,3-PENTANEDIOL; (2,2,4-TRIMETHYLPENTANE-DIOL-1,3)
(ING 6)
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: <5%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ING 5: MONOISOBUTYRATE). LEL: 0.62%. VP: 1.0 @ 100F.
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
Name:BICYCLIC OXAZOLIDINES SOLUTION (HEMIACETALS); (NUOSEPTIS)
CAS:56709-13-8
Fraction by Wt: <1%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:AMMONIUM HYDROXIDE; (AQUA AMMONIA) (SARA III)
CAS:1336-21-6
RTECS #:BQ9625000
OSHA PEL:N/K
ACGIH TLV:N/K
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:VOLATILE ORGANIC COMPOUNDS: 2.59 GMS/LTR
RTECS #:9999999VO
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SUPP DATA: TO REMOVE COMBINATION OF PARTICULATES & VAP.
WHEN USED IN CONFINED AREAS, WEAR NIOSH/MSHA APPRVD AIR (ING 11)
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ING 10:SUPP RESPS/HOODS. USE NIOSH/MSHA APPRVD RESPS WHEN
FLAME CUTTING, WELDING, BRAZING & SANDING MATL COATED (ING 12)
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ING 11: WITH PRODUCT. FOLLOW RESPIRATOR MANUFACTURER'S
DIRECTIONS FOR RESPIRATOR USE.
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
Name:VENT: APPLIC SAFETY & HLTH STDS IN MIXING, APPLIC & CURING
AREAS, & TO REMOVE SANDING DUSTS OF DRIED COATING & (ING 14)
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ING 13: DECOMPOSITION PRODUCT DURING WELDING AND FLAME
CUTTING ON SURFACES COATED WITH THIS PRODUCT.
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: IRRITATION OF
RESPIRATORY TRACT; HEADACHE, NAUSEA, DIZZINESS. EYE/SKIN: MAY CAUSE
EYE AND SKIN IRRITATION. INGESTION: NO EFFECTS ANTICIPATED FROM
INGESTION INCIDENTAL TO NORMAL USE. LARGER QUANTITIES MAY CAUSE
DISTRESS OF DIGESTIVE TRACT AND NAUSEA. CHRONIC: PROLONGED AND
REPEATED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: BREATHING OF SPRAY MIST AND/OR
SANDING DUST OVER PERIOD OF YEARS MAY CAUSE DUST DISEASE OF LUNGS.
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL ASSISTANCE.
SKIN: REMOVE WITH SOAP AND WATER. REMOVE SOILED CLOTHING.
INGESTION: DRINK 1 O R 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE
VOMITING. CONSULT PHYSICIAN IMMEDIATELY. TREAT SYMPTOMATICALLY.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:NONE
Lower Limits:SEE INGS
Extinguishing Media:IN CASE OF FIRE, USE CARBON DIOXIDE, DRY CHEMICAL,
FOAM OR OTHER NFPA APPROVED METHOD FOR TREATING CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SUMMON PROFESSIONAL FIREFIGHTERS. WATER SPRAY MAY BE INEFT. IF
WATER USED, FOG NOZZ ARE PREF. IF (SUPDAT)
Unusual Fire/Explosion Hazard:DUE TO PRESS BUILD-UP,CLSD CNTNRS EXPOS
TO EXTREME HEAT MAY EXPLO. AFTER WATER EVAP, REMAINING MATL WILL
BURN.DURING EMER CNDTNS,OVEREXP TO DECOMP PRODS(SUPDAT)
================== Accidental Release Measures ==================
Spill Release Procedures:WASH WITH WATER. BEFORE ATTEMPTING CLEAN-UP,
REFER TO HAZARD CAUTION INFORMATION IN OTHER SECTIONS OF MSDS.
CONTAIN SPILLED MATERIAL AND REMOVE WITH INERT ABSORBENT. STORE IN
CLOSED CONTAINER UNTIL PR OPERLY DISPOSED OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 110F AND KEEP FROM
FREEZING. KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT REUSE EMPTY
CONTAINERS. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:DO NOT BRTH VAPS, SPRAY MIST/SANDING DUST. WHEN
SPRAY APPLIED IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT, & DURING
SANDING/GRINDING OPERS, USE NIOSH/MSHA APPRVD MECH FILTER RESP TO
REMOVE SOLID AIRBORN E PARTICLES OF OVERSPRAY & (SUPDAT)
Ventilation:USE ONLY W/ADEQ VENT. PROVIDE GEN DILUTION/LOC EXHST VENT
IN VOL & PATTERN TO KEEP AIR CONTAM CONC BELOW CURRENT(ING 13)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, SMOKING OR USING WASHROOM.
Supplemental Safety and Health
FIRE FIGHT PROC: EXPOS TO FIRE/EXTREME HEAT, WATER SHOULD BE USED TO
COOL CLSD CNTNRS & PVNT PRESS BUILD-UP OR POSS AUTOIGNIT. EXPLO
HAZ: MAY CAUSE HLTH HAZ. SYMPS MAY NOT BE IMMED APPARENT. OBTAIN ME
D ATTN. RESP PROT: SANDING DUST. WHEN USED IN RESTRICTED AREAS,WEAR
NIOSH/MSHA APPRVD CHEM/MECH FILTERS DESIGNED(ING 10)
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGS
Spec Gravity:1.23
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:72
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH MATERIALS THAT ARE INCOMPATIBLE WITH WATER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZ FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE & OXIDES
OF METALS LISTED.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
966C (PMR 15)/QUARTZ FIBERS
| 101-77-9
67-56-1 |
|
IM7 (12K) G-SIZED FIBERS
| 7440-44-0 |
|
M&T SANNNOUS FLUOBORATE SOLUTION ELECTRONIC GRADE
| 13814-97-6 |
|
CURED PMR-15 PREPREG
| 7440-44-0
34406-24-1 |
|
IRONIZE ENAMEL, 603
| 64742-47-8 |
|
SAFETY FINISH
| 78-51-3
111-77-3 |
|
GCR-GASKET CEMENT REMOVER, 765
| 75-09-2
67-56-1
108-88-3
74-98-6
106-97-8 |
|
CL73-1682
| 12001-29-5
116-14-3 |
|
FLUOROPOLYMER ON WOVEN FIBER GLASS FABRIC
| |
|
NAFION NR50
| 31175-20-9 |
|
VESPEL ABRASIVE PREMIX SP1, ST2000
| 25038-81-7
7782-42-5 |
|
CONTAX H P II, 90393
| 142-82-5
110-82-7
74-98-6
64-17-5
67-63-0 |
|
C L P 10.75 OZ NET WT NO CFC'S, 90399
| 142-82-5
110-82-7
74-98-6
64-17-5
67-63-0 |
|
LIQUID CHLORINE
| 7782-50-5 |
|
INCOLOY ALLOY 800
| 7440-47-3
1309-37-1
7439-96-5
7440-02-0 |
|
U-2020 ISOCYANATE
| 26447-40-5
101-68-8 |
|
ACRYLIC EPOXY 138-37A
| 1330-20-7
121-44-8
107-98-2
100-41-4 |
|
RENE 108
| 7440-02-0
7440-48-4
7440-33-7
7440-47-3
7429-90-5
7440-25-7
7440-58-6 |
|
INSTINT COLORANT 516 LAMPBLACK
| 111-46-6
1333-86-4 |
|
FIBER GLASS CLOTH, VOLAN FINISH
| 65997-17-3
15096-41-0 |
|
FLUORESCENT COLORS, FS-9XX SERIES (11 OZ)
| 8032-32-4
108-88-3
110-54-3
74-98-6
75-28-5 |
|
PUM POW
| |
|
OIL/WATER SEPARATOR
| 6834-92-0
1310-73-2
1330-72-7
5131-66-8
872-50-4 |
|
SOY BASED ELECTROSTATIC BLACK INK
| |
|
DIXICHLOR MAX
| 7681-52-9
7647-14-5
1310-73-2
7732-18-5 |
|
REZTORE ANTISTATIC SURFACE CLEANER
| 111-76-2
68412-54-4
25322-68-3
7732-18-5 |
|
BATTERY ELECTROLYTE
| 7664-93-9 |
|
TETA, TX1235
| 112-24-3 |
|
BISMUTH SUBSALICYLATE
| 14882-18-9 |
|
MAGNESIUM SHEET/PLATE, AZ31B
| 7439-95-4
7429-90-5
7439-96-5
7440-66-6
7440-67-7 |
|
799 SILICONE GLASS & METAL BUILDING SEALANT - CLEAR
| 1760-24-3
112945-52-5
22984-54-9
83817-72-5
70131-67-8 |
|
MAR M 509
| 7440-47-3
7440-48-4
7440-50-8
7439-89-6
7439-96-5
7440-02-0
7440-21-3
7440-25-7
7440-33-7 |
|
414
| 79-10-7
7632-00-0
1310-58-3
1303-96-4
79-06-1
7631-95-0 |
|
RBC-6400
| 7440-02-0
25085-99-8 |
|
RBC-6400B
| 7440-02-0
68082-29-1 |
|
105 ELECTRIC SQUIB-STANDARD
| 7440-32-6
7778-74-7 |
|
WHITE REGENCY INT/EXT MOD ACRYLIC GLOSS ENAMEL, W2600
| 7732-18-5
13463-67-7
57-55-6
25265-77-4
56709-13-8
1336-21-6 |
|
CHLOROTRIFLUOROMETHANE
| 75-72-9 |
|
KRYLON 1602 ULTRA FLAT BLACK (NEW FORMULA)
| 74-98-6
108-88-3
1330-20-7
67-64-1 |
|
MERCURY BATTERY BA-1393/U
| 21908-53-2
7439-97-6
1310-58-3 |
|
KRYLON 1604 SHADOW GRAY (NEW FORMULA)
| 67-64-1
71-36-3
74-98-6
78-93-3
108-10-1
108-65-6
108-88-3
1330-20-7
13463-67-7 |
|
635
| 7782-42-5
14808-60-7
60676-86-0 |
|
GEAR SHIELD EXTRA HEAVY, GEAR SHIELD HEAVY, (SUPDAT)
| |
|
PR-1440 B-1/2, ACCELERATOR
| 61788-32-7
1333-86-4
1313-13-9
102-06-7 |
|
PR-1440 B-1/2, BASE
| 13463-67-7
1317-65-3
108-88-3
68611-50-7
67762-90-7 |
|
ZINC CHLORIDE BATTERY BA-15A
| 1313-13-9
7440-66-6
14762-74-4
7646-85-7
7439-92-1
7440-43-9
26545-49-3 |
|
1601 GLOSSY BLACK, SPRAY PAINT
| 74-98-6
75-28-5
108-88-3
100-41-4
1330-20-7
67-64-1
78-93-3
108-10-1
108-65-6 |
|
1501 GLOSSY WHITE, INDUSTRIAL MAINTENANCE (SUPDAT)
| 74-98-6
75-28-5
100-41-4
1330-20-7
71-36-3
67-64-1
78-93-3
108-65-6
13463-67-7 |
|
1701 BRIGHT GOLD, SPRAY PAINT
| 74-98-6
75-28-5
108-88-3
100-41-4
1330-20-7
67-64-1
7440-50-8 |
|
PR-1440 C-20, ACCELERATOR
| 61788-32-7
1333-86-4
1313-13-9
102-06-7 |
|
|